Messages in this thread Patch in this message | | | From | Michael Walle <> | Subject | [PATCH 3/3] ARM: dts: ebaz4205: enable NAND support | Date | Wed, 16 Jun 2021 17:54:37 +0200 |
| |
The board features a 128MiB NAND chip and recently linux gained support for the NAND controller on the Zynq SoC. Thus add the corresponding devicetree nodes.
Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm/boot/dts/zynq-ebaz4205.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts index b0b836aedd76..53fa6dbfd8fd 100644 --- a/arch/arm/boot/dts/zynq-ebaz4205.dts +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts @@ -48,6 +48,14 @@ pinctrl-0 = <&pinctrl_gpio0_default>; }; +&nfc0 { + status = "okay"; + + nand@0 { + reg = <0>; + }; +}; + &pinctrl0 { pinctrl_gpio0_default: gpio0-default { mux { @@ -118,6 +126,10 @@ }; }; +&smcc { + status = "okay"; +}; + &sdhci0 { status = "okay"; disable-wp; -- 2.20.1
| |