lkml.org 
[lkml]   [2021]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 1/3] dmaengine: ptdma: Initial driver for the AMD PTDMA
From
Date


On 6/8/2021 11:09 PM, Vinod Koul wrote:
> [CAUTION: External Email]
>
> On 02-06-21, 12:22, Sanjay R Mehta wrote:
>
>> +static int pt_core_execute_cmd(struct ptdma_desc *desc, struct pt_cmd_queue *cmd_q)
>> +{
>> + bool soc = FIELD_GET(DWORD0_SOC, desc->dw0);
>> + u8 *q_desc = (u8 *)&cmd_q->qbase[cmd_q->qidx];
>> + u8 *dp = (u8 *)desc;
>
> this case seems unnecessary?
>
>> +int pt_core_perform_passthru(struct pt_cmd_queue *cmd_q,
>> + struct pt_passthru_engine *pt_engine)
>
> Pls align this to preceding open brace, checkpatch with --strict would
> warn you about this
>
>> +static irqreturn_t pt_core_irq_handler(int irq, void *data)
>> +{
>> + struct pt_device *pt = data;
>> + struct pt_cmd_queue *cmd_q = &pt->cmd_q;
>> + u32 status;
>> +
>> + pt_core_disable_queue_interrupts(pt);
>> +
>> + status = ioread32(cmd_q->reg_interrupt_status);
>> + if (status) {
>> + cmd_q->int_status = status;
>> + cmd_q->q_status = ioread32(cmd_q->reg_status);
>> + cmd_q->q_int_status = ioread32(cmd_q->reg_int_status);
>> +
>> + /* On error, only save the first error value */
>> + if ((status & INT_ERROR) && !cmd_q->cmd_error)
>> + cmd_q->cmd_error = CMD_Q_ERROR(cmd_q->q_status);
>> +
>> + /* Acknowledge the interrupt */
>> + iowrite32(status, cmd_q->reg_interrupt_status);
>> + }
>> +
>> + pt_core_enable_queue_interrupts(pt);
>> +
>> + return IRQ_HANDLED;
>
> should you always return IRQ_HANDLED, that sounds apt for the if loop
> but not for the non loop case
>
>> +int pt_core_init(struct pt_device *pt)
>> +{
>> + char dma_pool_name[MAX_DMAPOOL_NAME_LEN];
>> + struct pt_cmd_queue *cmd_q = &pt->cmd_q;
>> + u32 dma_addr_lo, dma_addr_hi;
>> + struct device *dev = pt->dev;
>> + struct dma_pool *dma_pool;
>> + int ret;
>> +
>> + /* Allocate a dma pool for the queue */
>> + snprintf(dma_pool_name, sizeof(dma_pool_name), "%s_q", pt->name);
>> +
>> + dma_pool = dma_pool_create(dma_pool_name, dev,
>> + PT_DMAPOOL_MAX_SIZE,
>> + PT_DMAPOOL_ALIGN, 0);
>> + if (!dma_pool) {
>> + dev_err(dev, "unable to allocate dma pool\n");
>
> This is superfluous, allocator would warn on failure
>
>> +static struct pt_device *pt_alloc_struct(struct device *dev)
>> +{
>> + struct pt_device *pt;
>> +
>> + pt = devm_kzalloc(dev, sizeof(*pt), GFP_KERNEL);
>> +
>> + if (!pt)
>> + return NULL;
>> + pt->dev = dev;
>> + pt->ord = atomic_inc_return(&pt_ordinal);
>
> What is the use of this number?
>

There are eight similar instances of this DMA engine on AMD SOC.
It is to differentiate each of these instances.

- Sanjay

\
 
 \ /
  Last update: 2021-06-15 13:21    [W:0.108 / U:1.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site