lkml.org 
[lkml]   [2021]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: pmbus: dealing with unsigned mantissa in linear reading
Date

On 16/06/21 1:46 pm, Guenter Roeck wrote:
> On Tue, Jun 15, 2021 at 11:34:53PM +0000, Chris Packham wrote:
>> Hi Guenter,
>>
>> I've had a report from someone testing the BPA-RS600.
>>
>> When they have the input voltage set to >= 256V (apparently the PSU can
>> handle input up to 264V). The Vin reading goes negative.
>>
>> CMD 0x88, VAL=0xf3f8, Vin=254
>> CMD 0x88, VAL=0xf3fc, Vin=255
>> CMD 0x88, VAL=0xf400, Vin=-256
>>
>> Looking at pmbus_reg2data_linear() the mantissa is cast to s16 which is
>> correct according to section 7.1 of the PMBUS spec which says that the
>> mantissa is an 11-bit two's complement value.
>>
>> It seems that the BPA-RS600 is using a non-standard format for the
>> mantissa (probably because the range of the standard linear encoding
>> can't support values >255V). Does the pmbus infrastructure provide a way
>> for me to define a custom format/conversion for a given sensor?
> Essentially you'll have to implement a custom read word function and
> convert the value reported by the power supply to a valid linear11
> value. In this case, you may have to shift the reported value by 1 bit
> and increase the exponent by one.

OK I'll look at doing that. I already have bpa_rs600_read_word_data() so
I can hook in there.

> Not sure what you mean with "standard linear encoding can't support values
Yeah I figured that out after I sent the email. There are a few ways of
representing >256V in a standard conforming way.
>> 255V". Why not ? That is what the exponent is for, after all. It rather
> seems to me that the PS vendor decided to violate the standard to get
> another bit of accuracy.

Indeed that seems to be the case.

> Guenter
\
 
 \ /
  Last update: 2021-06-16 03:58    [W:0.050 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site