lkml.org 
[lkml]   [2021]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 06/12] media: hantro: add support for Rockchip RK3066
From
Date
Hi Ezequiel,

Am 11.06.21 um 17:50 schrieb Ezequiel Garcia:
> Hi Alex,
>
> On Thu, 2021-05-27 at 17:44 +0200, Alex Bee wrote:
>> RK3066's VPU IP block is the predecessor from what RK3288 has.
>> The hardware differences are:
>>   - supports decoding frame sizes up to 1920x1088 only
>>   - doesn't have the 'G1_REG_SOFT_RESET' register
>>     (requires another .reset callback for hantro_codec_ops,
>>      since writing this register will result in non-working
>>      IP block)
>>   - has one ACLK/HCLK per vdpu/vepu
>>   - ACLKs can be clocked up to 300 MHz only
> Have you tested trying 400 MHz (or more) ?

Yes, I've tried this on both RK3066 and RK3036 variants - everything
above  300 MHz results in non-functioning IP block.

See comment in RK3036 devicetree in vendor kernel at [1].

[1]
https://github.com/rockchip-linux/kernel/blob/develop-4.4/arch/arm/boot/dts/rk3036.dtsi#L246-L248

>
>>   - no MMU
>>     (no changes required: CMA will be transparently used)
>>
>> Add a new RK3066 variant which reflect this differences. This variant
>> can be used for RK3188 as well.
>>
> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
>
> Thanks!
> Ezequiel
>

\
 
 \ /
  Last update: 2021-06-14 18:47    [W:0.079 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site