lkml.org 
[lkml]   [2021]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH next 11/15] ARM: dts: am335x-pepper: switch to new cpsw switch drv
Date
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch Gumstix Pepper to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/am335x-pepper.dts | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index f9a027b47962..b5e88e627bc1 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -260,20 +260,19 @@
};

/* Ethernet */
-&cpsw_emac0 {
- status = "okay";
+&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
};

-&cpsw_emac1 {
- status = "okay";
+&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rgmii";
+ ti,dual-emac-pvid = <2>;
};

-&davinci_mdio {
- status = "okay";
+&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;

@@ -286,13 +285,12 @@
};
};

-&mac {
+&mac_sw {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ethernet_pins>;
};

-
&am33xx_pinmux {
ethernet_pins: pinmux_ethernet {
pinctrl-single,pins = <
--
2.17.1
\
 
 \ /
  Last update: 2021-06-12 03:17    [W:0.134 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site