lkml.org 
[lkml]   [2021]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
Date
The reset-gpios property is added to the optional dt-bindings and
also an example for it's usage.

Signed-off-by: Andreas Kaessens <akaessens@gmail.com>
Signed-off-by: Darian Biastoch <d.biastoch@gmail.com>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index 6ec3c8d79f49..2fa5edac7a35 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -49,6 +49,7 @@ Optional properties:
- interrupt-controller: Marks the device node as a interrupt controller.
- drive-open-drain: Sets the ODR flag in the IOCON register. This configures
the IRQ output as open drain active low.
+- reset-gpios: Corresponds to the active-low RESET# pin for the chip

Optional device specific properties:
- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
@@ -135,6 +136,7 @@ gpio21: gpio@21 {
microchip,irq-mirror;
pinctrl-names = "default";
pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>;
+ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;

gpio21pullups: pinmux {
pins = "gpio0", "gpio1", "gpio2", "gpio3",
--
2.25.1
\
 
 \ /
  Last update: 2021-06-10 15:25    [W:0.050 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site