lkml.org 
[lkml]   [2021]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: allwinner: a64-sopine-baseboard: change RGMII mode to TXID
On Wed, Jun 09, 2021 at 04:38:43PM +0800, Icenowy Zheng wrote:
> Although the schematics of Pine A64-LTS and SoPine Baseboard shows both
> the RX and TX internal delay are enabled, they're using the same broken
> RTL8211E chip batch with Pine A64+, so they should use TXID instead, not
> ID.
>
> In addition, by checking the real components soldered on both a SoPine
> Baseboard and a Pine A64-LTS, RX delay is not enabled (GR69 soldered and
> GR70 NC) despite the schematics says it's enabled. It's a common
> situation for Pine64 boards that the NC information on schematics is not
> the same with the board.
>
> So the RGMII delay mode should be TXID on these boards.
>
> Fixes: c2b111e59a7b ("arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id")
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Applied, thanks
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-06-10 14:53    [W:0.042 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site