lkml.org 
[lkml]   [2021]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V1] arm64: dts: qcom: sc7180: Added xo clock for eMMC and Sd card
On Thu 10 Jun 02:54 CDT 2021, Konrad Dybcio wrote:

> Hi,
>
>
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -701,8 +701,9 @@
> > interrupt-names = "hc_irq", "pwr_irq";
> >
> > clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> > - <&gcc GCC_SDCC1_AHB_CLK>;
> > - clock-names = "core", "iface";
> > + <&gcc GCC_SDCC1_AHB_CLK>,
> > + <&rpmhcc RPMH_CXO_CLK>;
>
> Don't these clocks fit in 100 chars?
>

We typically list them on one line each, so I'm fine with that.

But all three clocks should be aligned.

>
>
> > + clock-names = "core", "iface","xo";
>
> A space is missing before "xo".
>

Thanks for pointing this out.

I fixed up the indentation and applied the patch.

Regards,
Bjorn

>
>
> > interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
> > <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
> > interconnect-names = "sdhc-ddr","cpu-sdhc";
> > @@ -2666,8 +2667,9 @@
> > interrupt-names = "hc_irq", "pwr_irq";
> >
> > clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> > - <&gcc GCC_SDCC2_AHB_CLK>;
> > - clock-names = "core", "iface";
> > + <&gcc GCC_SDCC2_AHB_CLK>,
> > + <&rpmhcc RPMH_CXO_CLK>;
>
> Ditto
>
>
>
> Konrad
>

\
 
 \ /
  Last update: 2021-06-11 05:30    [W:0.087 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site