lkml.org 
[lkml]   [2021]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V9 1/2] watchdog: mtk: support pre-timeout when the bark irq is available
From
Date
On 5/5/21 6:51 PM, 王擎 wrote:
>
>> On 4/24/21 6:52 PM, Wang Qing wrote:
>>> Use the bark interrupt as the pretimeout notifier if available.
>>>
>>> When the watchdog timer expires in dual mode, an interrupt will be
>>> triggered first, then the timing restarts. The reset signal will be
>>> initiated when the timer expires again.
>>>
>>> The pretimeout notification shall occur at timeout-sec/2.
>>>
>>> V2:
>>> - panic() by default if WATCHDOG_PRETIMEOUT_GOV is not enabled.
>>>
>>> V3:
>>> - Modify the pretimeout behavior, manually reset after the pretimeout
>>> - is processed and wait until timeout.
>>>
>>> V4:
>>> - Remove pretimeout related processing.
>>> - Add dual mode control separately.
>>>
>>> V5:
>>> - Fix some formatting and printing problems.
>>>
>>> V6:
>>> - Realize pretimeout processing through dualmode.
>>>
>>> V7:
>>> - Add set_pretimeout().
>>>
>>> V8/V9:
>>> - Fix some formatting problems.
>>>
>>> Signed-off-by: Wang Qing <wangqing@vivo.com>
>>
>> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
>>
>> Note that the version history should be after "---".
>>
>> Guenter
>>
>
> Thanks, Guenter.
> And what do I need to do if I want merge into the next-tree?
>
Wim should take care of that.

Guenter

\
 
 \ /
  Last update: 2021-05-06 04:11    [W:0.202 / U:1.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site