lkml.org 
[lkml]   [2021]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH v3 1/6] gpio: regmap: Add quirk for output data register
    On Mon, May 24, 2021 at 12:34 AM Sander Vanheule <sander@svanheule.net> wrote:
    >
    > GPIO chips may not support setting the output value when a pin is
    > configured as an input, although the current implementation assumes this
    > is always possible.
    >
    > Add support for setting pin direction before value. The order defaults
    > to setting the value first, but this can be reversed by setting the
    > GPIO_REGMAP_QUIRK_SET_DIRECTION_FIRST flag in regmap_config.quirks.
    >
    > Signed-off-by: Sander Vanheule <sander@svanheule.net>
    > ---

    Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

    \
     
     \ /
      Last update: 2021-05-31 09:25    [W:3.776 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site