lkml.org 
[lkml]   [2021]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFT 1/2] regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
Date
Current code does not set .curr_table and .n_linear_ranges settings,
so it cannot use the regulator_get/set_current_limit_regmap helpers.
If we setup the curr_table, it will has 200 entries.
Implement customized .set_current_limit/.get_current_limit callbacks
instead.

Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi ChiYuan,
I don't have this h/w to test.
Please help to review and test this patch.

Thanks,
Axel

drivers/regulator/rtmv20-regulator.c | 42 ++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/rtmv20-regulator.c b/drivers/regulator/rtmv20-regulator.c
index 852fb2596ffd..5adc552dffd5 100644
--- a/drivers/regulator/rtmv20-regulator.c
+++ b/drivers/regulator/rtmv20-regulator.c
@@ -103,9 +103,47 @@ static int rtmv20_lsw_disable(struct regulator_dev *rdev)
return 0;
}

+static int rtmv20_lsw_set_current_limit(struct regulator_dev *rdev, int min_uA,
+ int max_uA)
+{
+ int sel;
+
+ if (min_uA > RTMV20_LSW_MAXUA || max_uA < RTMV20_LSW_MINUA)
+ return -EINVAL;
+
+ if (max_uA > RTMV20_LSW_MAXUA)
+ max_uA = RTMV20_LSW_MAXUA;
+
+ sel = (max_uA - RTMV20_LSW_MINUA) / RTMV20_LSW_STEPUA;
+
+ /* Ensure the selected setting is still in range */
+ if ((sel * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA) < min_uA)
+ return -EINVAL;
+
+ sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
+ rdev->desc->csel_mask, sel);
+}
+
+static int rtmv20_lsw_get_current_limit(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
+ if (ret)
+ return ret;
+
+ val &= rdev->desc->csel_mask;
+ val >>= ffs(rdev->desc->csel_mask) - 1;
+
+ return val * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA;
+}
+
static const struct regulator_ops rtmv20_regulator_ops = {
- .set_current_limit = regulator_set_current_limit_regmap,
- .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = rtmv20_lsw_set_current_limit,
+ .get_current_limit = rtmv20_lsw_get_current_limit,
.enable = rtmv20_lsw_enable,
.disable = rtmv20_lsw_disable,
.is_enabled = regulator_is_enabled_regmap,
--
2.25.1
\
 
 \ /
  Last update: 2021-05-30 14:42    [W:0.076 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site