lkml.org 
[lkml]   [2021]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 06/18] media: cadence: csi2rx: Add external DPHY support
Date
On 26/05/2021 18:22, Pratyush Yadav wrote:
> Some platforms like TI's J721E can have the CSI2RX paired with an
> external DPHY. Add support to enable and configure the DPHY using the
> generic PHY framework.
>
> Get the pixel rate and bpp from the subdev and pass them on to the DPHY
> along with the number of lanes. All other settings are left to their
> default values.
>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
>
> ---
>
> Changes in v2:
> - Use phy_pm_runtime_get_sync() and phy_pm_runtime_put() before making
> calls to set PHY mode, etc. to make sure it is ready.
>
> drivers/media/platform/cadence/cdns-csi2rx.c | 158 +++++++++++++++++--
> 1 file changed, 148 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
> index c68a3eac62cd..459326de2eff 100644
> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
> @@ -30,6 +30,12 @@
> #define CSI2RX_STATIC_CFG_DLANE_MAP(llane, plane) ((plane) << (16 + (llane) * 4))
> #define CSI2RX_STATIC_CFG_LANES_MASK GENMASK(11, 8)
>
> +#define CSI2RX_DPHY_LANE_CTRL_REG 0x40
> +#define CSI2RX_DPHY_CL_RST BIT(16)
> +#define CSI2RX_DPHY_DL_RST(i) BIT((i) + 12)
> +#define CSI2RX_DPHY_CL_EN BIT(4)
> +#define CSI2RX_DPHY_DL_EN(i) BIT(i)
> +
> #define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100)
>
> #define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000)
> @@ -54,6 +60,11 @@ enum csi2rx_pads {
> CSI2RX_PAD_MAX,
> };
>
> +struct csi2rx_fmt {
> + u32 code;
> + u8 bpp;
> +};
> +
> struct csi2rx_priv {
> struct device *dev;
> unsigned int count;
> @@ -85,6 +96,52 @@ struct csi2rx_priv {
> int source_pad;
> };
>
> +static const struct csi2rx_fmt formats[] = {
> + {
> + .code = MEDIA_BUS_FMT_YUYV8_2X8,
> + .bpp = 16,
> + },
> + {
> + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> + .bpp = 16,
> + },
> + {
> + .code = MEDIA_BUS_FMT_YVYU8_2X8,
> + .bpp = 16,
> + },
> + {
> + .code = MEDIA_BUS_FMT_VYUY8_2X8,
> + .bpp = 16,
> + },
> +};
> +
> +static u8 csi2rx_get_bpp(u32 code)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(formats); i++) {
> + if (formats[i].code == code)
> + return formats[i].bpp;
> + }
> +
> + return 0;
> +}
> +
> +static s64 csi2rx_get_pixel_rate(struct csi2rx_priv *csi2rx)
> +{
> + struct v4l2_ctrl *ctrl;
> +
> + ctrl = v4l2_ctrl_find(csi2rx->source_subdev->ctrl_handler,
> + V4L2_CID_PIXEL_RATE);
> + if (!ctrl) {
> + dev_err(csi2rx->dev, "no pixel rate control in subdev: %s\n",
> + csi2rx->source_subdev->name);
> + return -EINVAL;
> + }
> +
> + return v4l2_ctrl_g_ctrl_int64(ctrl);
> +}
> +
> static inline
> struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
> {
> @@ -101,6 +158,66 @@ static void csi2rx_reset(struct csi2rx_priv *csi2rx)
> writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG);
> }
>
> +static int csi2rx_configure_external_dphy(struct csi2rx_priv *csi2rx)
> +{
> + union phy_configure_opts opts = { };
> + struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy;
> + struct v4l2_subdev_format sd_fmt;
> + s64 pixel_rate;
> + int ret;
> + u8 bpp;
> + bool got_pm = true;
> +
> + sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + sd_fmt.pad = 0;
> +
> + ret = v4l2_subdev_call(csi2rx->source_subdev, pad, get_fmt, NULL,
> + &sd_fmt);
> + if (ret)
> + return ret;
> +
> + bpp = csi2rx_get_bpp(sd_fmt.format.code);
> + if (!bpp)
> + return -EINVAL;
> +
> + pixel_rate = csi2rx_get_pixel_rate(csi2rx);
> + if (pixel_rate < 0)
> + return pixel_rate;
> +
> + ret = phy_mipi_dphy_get_default_config(pixel_rate, bpp,
> + csi2rx->num_lanes, cfg);
> + if (ret)
> + return ret;

I guess the above code works for now, but with multiple streams it
won't. There's no (single) pixel rate or bpp with multiple streams, and
the link freq is the one that needs to be used. There's
v4l2_get_link_freq() helper which makes it easier to support both pixel
rate and link freq.

Tomi

\
 
 \ /
  Last update: 2021-05-28 09:23    [W:0.246 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site