lkml.org 
[lkml]   [2021]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support
    > +	gpio_cfg.reg_dat_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
    > + gpio_cfg.reg_set_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
    > + gpio_cfg.reg_dir_in_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DIR0);

    Btw. you'd only need GPIO_REGMAP_ADDR(x) if x might be 0. Because you
    have
    a constant != 0 there, you could save the GPIO_REGMAP_ADDR() call. You
    could drop this if you like, but no need to respin the series for this.

    -michael

    \
     
     \ /
      Last update: 2021-05-28 08:31    [W:4.154 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site