lkml.org 
[lkml]   [2021]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
Date
On 5/27/21 3:59 AM, Robert Marko wrote:
> On Thu, May 27, 2021 at 12:22 PM Robert Marko <robert.marko@sartura.hr> wrote:
>>
>> On Mon, May 24, 2021 at 3:47 PM Guenter Roeck <linux@roeck-us.net> wrote:
>>>
>>> On 5/24/21 5:21 AM, Robert Marko wrote:
>>>> On Fri, May 21, 2021 at 4:46 PM Guenter Roeck <linux@roeck-us.net> wrote:
>>>>>
>>>>> On 5/21/21 4:56 AM, Robert Marko wrote:
>>>>>> On Fri, May 21, 2021 at 12:56 PM Guenter Roeck <linux@roeck-us.net> wrote:
>>>>>>>
>>>>>>> On 5/21/21 1:36 AM, Robert Marko wrote:
>>>>>>>> On Wed, May 19, 2021 at 3:19 PM Guenter Roeck <linux@roeck-us.net> wrote:
>>>>>>>>>
>>>>>>>>> On 5/19/21 5:38 AM, Robert Marko wrote:
>>>>>>>>>> On Fri, Apr 30, 2021 at 3:48 PM Guenter Roeck <linux@roeck-us.net> wrote:
>>>>>>>>>>>
>>>>>>>>>>> On Fri, Apr 30, 2021 at 03:27:33PM +0200, Robert Marko wrote:
>>>>>>>>>>>> This adds support for the Delta DPS-920AB PSU.
>>>>>>>>>>>>
>>>>>>>>>>>> Only missing feature is fan control which the PSU supports.
>>>>>>>>>>>>
>>>>>>>>>>>> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
>>>>>>>>>>>> ---
>>>>>>>>>>>> Documentation/hwmon/dps920ab.rst | 80 ++++++++++++++++++++++++++++++++
>>>>>>>>>>>> Documentation/hwmon/index.rst | 1 +
>>>>>>>>>>>> drivers/hwmon/pmbus/Kconfig | 9 ++++
>>>>>>>>>>>> drivers/hwmon/pmbus/Makefile | 1 +
>>>>>>>>>>>> drivers/hwmon/pmbus/dps920ab.c | 63 +++++++++++++++++++++++++
>>>>>>>>>>>> 5 files changed, 154 insertions(+)
>>>>>>>>>>>> create mode 100644 Documentation/hwmon/dps920ab.rst
>>>>>>>>>>>> create mode 100644 drivers/hwmon/pmbus/dps920ab.c
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/Documentation/hwmon/dps920ab.rst b/Documentation/hwmon/dps920ab.rst
>>>>>>>>>>>> new file mode 100644
>>>>>>>>>>>> index 000000000000..df0aef530c7e
>>>>>>>>>>>> --- /dev/null
>>>>>>>>>>>> +++ b/Documentation/hwmon/dps920ab.rst
>>>>>>>>>>>> @@ -0,0 +1,80 @@
>>>>>>>>>>>> +.. SPDX-License-Identifier: GPL-2.0-or-later
>>>>>>>>>>>> +
>>>>>>>>>>>> +Kernel driver dps920ab
>>>>>>>>>>>> +========================
>>>>>>>>>>>> +
>>>>>>>>>>>> +Supported chips:
>>>>>>>>>>>> +
>>>>>>>>>>>> + * Delta DPS920AB
>>>>>>>>>>>> +
>>>>>>>>>>>> + Prefix: 'dps920ab'
>>>>>>>>>>>> +
>>>>>>>>>>>> + Addresses scanned: -
>>>>>>>>>>>> +
>>>>>>>>>>>> +Authors:
>>>>>>>>>>>> + Robert Marko <robert.marko@sartura.hr>
>>>>>>>>>>>> +
>>>>>>>>>>>> +
>>>>>>>>>>>> +Description
>>>>>>>>>>>> +-----------
>>>>>>>>>>>> +
>>>>>>>>>>>> +This driver implements support for Delta DPS920AB 920W 54V DC single output
>>>>>>>>>>>> +power supply with PMBus support.
>>>>>>>>>>>> +
>>>>>>>>>>>> +The driver is a client driver to the core PMBus driver.
>>>>>>>>>>>> +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
>>>>>>>>>>>> +
>>>>>>>>>>>> +
>>>>>>>>>>>> +Usage Notes
>>>>>>>>>>>> +-----------
>>>>>>>>>>>> +
>>>>>>>>>>>> +This driver does not auto-detect devices. You will have to instantiate the
>>>>>>>>>>>> +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
>>>>>>>>>>>> +details.
>>>>>>>>>>>> +
>>>>>>>>>>>> +
>>>>>>>>>>>> +Sysfs entries
>>>>>>>>>>>> +-------------
>>>>>>>>>>>> +
>>>>>>>>>>>> +======================= ======================================================
>>>>>>>>>>>> +curr1_label "iin"
>>>>>>>>>>>> +curr1_input Measured input current
>>>>>>>>>>>> +curr1_crit Critical maximum current
>>>>>>>>>>>> +curr1_crit_alarm Current critical high alarm
>>>>>>>>>>>> +
>>>>>>>>>>>> +curr2_label "iout1"
>>>>>>>>>>>> +curr2_input Measured output current
>>>>>>>>>>>> +curr2_crit Critical maximum current
>>>>>>>>>>>> +curr2_crit_alarm Current critical high alarm
>>>>>>>>>>>> +
>>>>>>>>>>>> +in1_label "vin"
>>>>>>>>>>>> +in1_input Measured input voltage
>>>>>>>>>>>> +in1_lcrit Critical minimum input voltage
>>>>>>>>>>>> +in1_lcrit_alarm Input voltage critical low alarm
>>>>>>>>>>>> +in1_crit Critical maximum input voltage
>>>>>>>>>>>> +in1_crit_alarm Input voltage critical high alarm
>>>>>>>>>>>> +
>>>>>>>>>>>> +in2_label "vout1"
>>>>>>>>>>>> +in2_input Measured output voltage
>>>>>>>>>>>> +in2_lcrit Critical minimum output voltage
>>>>>>>>>>>> +in2_lcrit_alarm Output voltage critical low alarm
>>>>>>>>>>>> +in2_crit Critical maximum output voltage
>>>>>>>>>>>> +in2_crit_alarm Output voltage critical high alarm
>>>>>>>>>>>> +
>>>>>>>>>>>> +power1_label "pin"
>>>>>>>>>>>> +power1_input Measured input power
>>>>>>>>>>>> +power1_alarm Input power high alarm
>>>>>>>>>>>> +
>>>>>>>>>>>> +power2_label "pout1"
>>>>>>>>>>>> +power2_input Measured output power
>>>>>>>>>>>> +
>>>>>>>>>>>> +temp[1-2]_input Measured temperature
>>>>>>>>>>>> +temp[1-2]_crit Critical high temperature
>>>>>>>>>>>> +temp[1-2]_crit_alarm Chip temperature critical high alarm
>>>>>>>>>>>> +temp[1-2]_max Maximum temperature
>>>>>>>>>>>> +temp[1-2]_max_alarm Chip temperature high alarm
>>>>>>>>>>>> +
>>>>>>>>>>>> +fan1_alarm Fan 1 warning.
>>>>>>>>>>>> +fan1_fault Fan 1 fault.
>>>>>>>>>>>> +fan1_input Fan 1 speed in RPM.
>>>>>>>>>>>> +======================= ======================================================
>>>>>>>>>>>> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
>>>>>>>>>>>> index 8d5a2df1ecb6..b24436f22052 100644
>>>>>>>>>>>> --- a/Documentation/hwmon/index.rst
>>>>>>>>>>>> +++ b/Documentation/hwmon/index.rst
>>>>>>>>>>>> @@ -54,6 +54,7 @@ Hardware Monitoring Kernel Drivers
>>>>>>>>>>>> dell-smm-hwmon
>>>>>>>>>>>> dme1737
>>>>>>>>>>>> drivetemp
>>>>>>>>>>>> + dps920ab
>>>>>>>>>>>> ds1621
>>>>>>>>>>>> ds620
>>>>>>>>>>>> emc1403
>>>>>>>>>>>> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
>>>>>>>>>>>> index 32d2fc850621..865ade0aa205 100644
>>>>>>>>>>>> --- a/drivers/hwmon/pmbus/Kconfig
>>>>>>>>>>>> +++ b/drivers/hwmon/pmbus/Kconfig
>>>>>>>>>>>> @@ -66,6 +66,15 @@ config SENSORS_IBM_CFFPS
>>>>>>>>>>>> This driver can also be built as a module. If so, the module will
>>>>>>>>>>>> be called ibm-cffps.
>>>>>>>>>>>>
>>>>>>>>>>>> +config SENSORS_DPS920AB
>>>>>>>>>>>> + tristate "Delta DPS920AB Power Supply"
>>>>>>>>>>>> + help
>>>>>>>>>>>> + If you say yes here you get hardware monitoring support for Delta
>>>>>>>>>>>> + DPS920AB Power Supplies.
>>>>>>>>>>>> +
>>>>>>>>>>>> + This driver can also be built as a module. If so, the module will
>>>>>>>>>>>> + be called dps920ab.
>>>>>>>>>>>> +
>>>>>>>>>>>> config SENSORS_INSPUR_IPSPS
>>>>>>>>>>>> tristate "INSPUR Power System Power Supply"
>>>>>>>>>>>> help
>>>>>>>>>>>> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
>>>>>>>>>>>> index 6a4ba0fdc1db..f59ba0123d68 100644
>>>>>>>>>>>> --- a/drivers/hwmon/pmbus/Makefile
>>>>>>>>>>>> +++ b/drivers/hwmon/pmbus/Makefile
>>>>>>>>>>>> @@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
>>>>>>>>>>>> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
>>>>>>>>>>>> obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
>>>>>>>>>>>> obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
>>>>>>>>>>>> +obj-$(CONFIG_SENSORS_DPS920AB) += dps920ab.o
>>>>>>>>>>>> obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
>>>>>>>>>>>> obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
>>>>>>>>>>>> obj-$(CONFIG_SENSORS_IR38064) += ir38064.o
>>>>>>>>>>>> diff --git a/drivers/hwmon/pmbus/dps920ab.c b/drivers/hwmon/pmbus/dps920ab.c
>>>>>>>>>>>> new file mode 100644
>>>>>>>>>>>> index 000000000000..d579ed9f879c
>>>>>>>>>>>> --- /dev/null
>>>>>>>>>>>> +++ b/drivers/hwmon/pmbus/dps920ab.c
>>>>>>>>>>>> @@ -0,0 +1,63 @@
>>>>>>>>>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>>>>>>>>>> +/*
>>>>>>>>>>>> + * Driver for Delta DPS920AB PSU
>>>>>>>>>>>> + *
>>>>>>>>>>>> + * Copyright (C) 2021 Delta Networks, Inc.
>>>>>>>>>>>> + * Copyright (C) 2021 Sartura Ltd.
>>>>>>>>>>>> + */
>>>>>>>>>>>> +
>>>>>>>>>>>> +#include <linux/i2c.h>
>>>>>>>>>>>> +#include <linux/module.h>
>>>>>>>>>>>> +#include <linux/of_device.h>
>>>>>>>>>>>> +#include "pmbus.h"
>>>>>>>>>>>> +
>>>>>>>>>>>> +static struct pmbus_driver_info dps920ab_info = {
>>>>>>>>>>>> + .pages = 1,
>>>>>>>>>>>> +
>>>>>>>>>>>> + .format[PSC_VOLTAGE_IN] = linear,
>>>>>>>>>>>> + .format[PSC_VOLTAGE_OUT] = linear,
>>>>>>>>>>>> + .format[PSC_CURRENT_IN] = linear,
>>>>>>>>>>>> + .format[PSC_CURRENT_OUT] = linear,
>>>>>>>>>>>> + .format[PSC_POWER] = linear,
>>>>>>>>>>>> + .format[PSC_FAN] = linear,
>>>>>>>>>>>> + .format[PSC_TEMPERATURE] = linear,
>>>>>>>>>>>> +
>>>>>>>>>>>> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
>>>>>>>>>>>> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
>>>>>>>>>>>> + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
>>>>>>>>>>>> + PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
>>>>>>>>>>>> + PMBUS_HAVE_PIN | PMBUS_HAVE_POUT |
>>>>>>>>>>>> + PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 |
>>>>>>>>>>>> + PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
>>>>>>>>>>>> +};
>>>>>>>>>>>> +
>>>>>>>>>>>> +static int dps920ab_probe(struct i2c_client *client)
>>>>>>>>>>>> +{
>>>>>>>>>>>> + if (!i2c_check_functionality(client->adapter,
>>>>>>>>>>>> + I2C_FUNC_SMBUS_BYTE_DATA |
>>>>>>>>>>>> + I2C_FUNC_SMBUS_WORD_DATA))
>>>>>>>>>>>> + return -ENODEV;
>>>>>>>>>>>
>>>>>>>>>>> This check is done in pmbus_do_probe(), and repeating it here does not add
>>>>>>>>>>> any value.
>>>>>>>>>>
>>>>>>>>>> Ok, makes sense.
>>>>>>>>>>>
>>>>>>>>>>> That makes me wonder: Is this driver needed in the first place, or could
>>>>>>>>>>> it be added to drivers/hwmon/pmbus/pmbus.c ?
>>>>>>>>>>
>>>>>>>>>> It could be added as a generic driver, but that creates properties in
>>>>>>>>>> the sysfs that this thing
>>>>>>>>>> does not support like 3 voltage readings, 3 fans, and so on.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Can you be more specific ? What additional unsupported attributes
>>>>>>>>> are added, and why ? Are you saying the PSU reports registers as
>>>>>>>>> existing which do not really exist ? If so, which registers are those ?
>>>>>>>>
>>>>>>>> Sure, when core does probing and autodiscovery, then the following
>>>>>>>> sysfs attributes are created:
>>>>>>>>>
>>>>>>>>> curr1_crit fan3_fault in3_min_alarm temp1_max
>>>>>>>>> curr1_crit_alarm fan3_input in3_rated_max temp1_max_alarm
>>>>>>>>> curr1_input fan3_target in3_rated_min temp1_min
>>>>>>>>> curr1_label in1_crit name temp1_min_alarm
>>>>>>>>> curr1_max in1_crit_alarm of_node temp1_rated_max
>>>>>>>>> curr1_max_alarm in1_input power temp2_crit
>>>>>>>>> curr1_rated_max in1_label power1_alarm temp2_crit_alarm
>>>>>>>>> curr2_crit in1_lcrit power1_input temp2_input
>>>>>>>>> curr2_crit_alarm in1_lcrit_alarm power1_label temp2_lcrit
>>>>>>>>> curr2_input in1_max power1_max temp2_lcrit_alarm
>>>>>>>>> curr2_label in1_max_alarm power1_rated_max temp2_max
>>>>>>>>> curr2_lcrit in1_min power2_cap temp2_max_alarm
>>>>>>>>> curr2_lcrit_alarm in1_min_alarm power2_cap_alarm temp2_min
>>>>>>>>> curr2_max in1_rated_max power2_crit temp2_min_alarm
>>>>>>>>> curr2_max_alarm in1_rated_min power2_crit_alarm temp2_rated_max
>>>>>>>>> curr2_rated_max in2_input power2_input temp3_crit
>>>>>>>>> device in2_label power2_label temp3_crit_alarm
>>>>>>>>> fan1_alarm in3_crit power2_max temp3_input
>>>>>>>>> fan1_fault in3_crit_alarm power2_max_alarm temp3_lcrit
>>>>>>>>> fan1_input in3_input power2_rated_max temp3_lcrit_alarm
>>>>>>>>> fan1_target in3_label subsystem temp3_max
>>>>>>>>> fan2_alarm in3_lcrit temp1_crit temp3_max_alarm
>>>>>>>>> fan2_fault in3_lcrit_alarm temp1_crit_alarm temp3_min
>>>>>>>>> fan2_input in3_max temp1_input temp3_min_alarm
>>>>>>>>> fan2_target in3_max_alarm temp1_lcrit temp3_rated_max
>>>>>>>>> fan3_alarm in3_min temp1_lcrit_alarm uevent
>>>>>>>>
>>>>>>>> The following return -1, or -500 so they are not supported.
>>>>>>>> * fan2
>>>>>>>> * in2
>>>>>>>>
>>>>>>>> Weirdly, with the external driver both fan2 and in2 are enabled and work fine,
>>>>>>>> but when auto probing they are fan3 and in3.
>>>>>>>>
>>>>>>>> temp3 actually seems to return a valid temperature despite it not being used in
>>>>>>>> the vendor driver that features were picked from.
>>>>>>>>
>>>>>>>
>>>>>>> Can you run "grep . *" in the hwmon directory so I can see actual values ?
>>>>>>>
>>>>>> Sure:
>>>>>>>
>>>>>>> curr1_crit:-500
>>>>>>> curr1_crit_alarm:0
>>>>>>> curr1_input:195
>>>>>>> curr1_label:iin
>>>>>>> curr1_max:-500
>>>>>>> curr1_max_alarm:0
>>>>>>> curr1_rated_max:-500
>>>>>>> curr2_crit:-500
>>>>>>> curr2_crit_alarm:0
>>>>>>> curr2_input:320
>>>>>>> curr2_label:iout1
>>>>>>> curr2_lcrit:-500
>>>>>>> curr2_lcrit_alarm:0
>>>>>>> curr2_max:18625
>>>>>>> curr2_max_alarm:0
>>>>>>> curr2_rated_max:16875
>>>>>>> grep: device: Is a directory
>>>>>>> fan1_alarm:0
>>>>>>> fan1_fault:0
>>>>>>> fan1_input:10000
>>>>>>> fan1_target:0
>>>>>>> fan2_alarm:1
>>>>>>> fan2_fault:1
>>>>>>> fan2_input:-1
>>>>>>> fan2_target:-1
>>>>>>> fan3_alarm:1
>>>>>>> fan3_fault:1
>>>>>>> fan3_input:-1
>>>>>>> fan3_target:-1
>>>>>>> in1_crit:-500
>>>>>>> in1_crit_alarm:0
>>>>>>> in1_input:245250
>>>>>>> in1_label:vin
>>>>>>> in1_lcrit:-500
>>>>>>> in1_lcrit_alarm:0
>>>>>>> in1_max:-500
>>>>>>> in1_max_alarm:0
>>>>>>> in1_min:-500
>>>>>>> in1_min_alarm:0
>>>>>>> in1_rated_max:-500
>>>>>>> in1_rated_min:-500
>>>>>>> in2_input:-500
>>>>>>> in2_label:vcap
>>>>>>> in3_crit:255996
>>>>>>> in3_crit_alarm:0
>>>>>>> in3_input:54511
>>>>>>> in3_label:vout1
>>>>>>> in3_lcrit:255996
>>>>>>> in3_lcrit_alarm:0
>>>>>>> in3_max:255996
>>>>>>> in3_max_alarm:0
>>>>>>> in3_min:255996
>>>>>>> in3_min_alarm:0
>>>>>>> in3_rated_max:56136
>>>>>>> in3_rated_min:52863
>>>>>>> name:dps920ab
>>>>>>> grep: of_node: Is a directory
>>>>>>> grep: power: Is a directory
>>>>>>> power1_alarm:0
>>>>>>> power1_input:33250000
>>>>>>> power1_label:pin
>>>>>>> power1_max:-500000
>>>>>>> power1_rated_max:-500000
>>>>>>> power2_cap:-500000
>>>>>>> power2_cap_alarm:0
>>>>>>> power2_crit:-500000
>>>>>>> power2_crit_alarm:0
>>>>>>> power2_input:17750000
>>>>>>> power2_label:pout1
>>>>>>> power2_max:-500000
>>>>>>> power2_max_alarm:0
>>>>>>> power2_rated_max:920000000
>>>>>>> grep: subsystem: Is a directory
>>>>>>> temp1_crit:-500
>>>>>>> temp1_crit_alarm:0
>>>>>>> temp1_input:23000
>>>>>>> temp1_lcrit:-500
>>>>>>> temp1_lcrit_alarm:0
>>>>>>> temp1_max:-500
>>>>>>> temp1_max_alarm:0
>>>>>>> temp1_min:-500
>>>>>>> temp1_min_alarm:0
>>>>>>> temp1_rated_max:-500
>>>>>>> temp2_crit:-500
>>>>>>> temp2_crit_alarm:0
>>>>>>> temp2_input:26000
>>>>>>> temp2_lcrit:-500
>>>>>>> temp2_lcrit_alarm:0
>>>>>>> temp2_max:-500
>>>>>>> temp2_max_alarm:0
>>>>>>> temp2_min:-500
>>>>>>> temp2_min_alarm:0
>>>>>>> temp2_rated_max:-500
>>>>>>> temp3_crit:-500
>>>>>>> temp3_crit_alarm:0
>>>>>>> temp3_input:30000
>>>>>>> temp3_lcrit:-500
>>>>>>> temp3_lcrit_alarm:0
>>>>>>> temp3_max:-500
>>>>>>> temp3_max_alarm:0
>>>>>>> temp3_min:-500
>>>>>>> temp3_min_alarm:0
>>>>>>> temp3_rated_max:-500
>>>>>>> uevent:OF_NAME=psu
>>>>>>> uevent:OF_FULLNAME=/ap806/config-space@f0000000/i2c@511000/psu@5a
>>>>>>> uevent:OF_COMPATIBLE_0=delta,dps920ab
>>>>>>> uevent:OF_COMPATIBLE_N=1
>>>>>>
>>>>> Ok, good enough. It looks like the PSU reports values for pretty much everything,
>>>>> including registers which don't exist. With that in mind, please check
>>>>> the attributes generated by your driver - I suspect that some of the limit
>>>>> attributes are not really supported (maybe none of them is supported).
>>>>
>>>> Yeah, I also think that none of those limits are actually supported.
>>>> Does the core expose a way to not register those?
>>>>
>>>
>>> Have the read_word function return -ENXIO for unsupported registers
>>> (and add a comment to the code explaining why you do that).
>>> See drivers/hwmon/pmbus/fsp-3y.c for an example.
>>
>> Thanks, will implement that.
>> In the meantime I finally got the PMBus command list that
>> the PSU supports.
>> It implements PMBus 1.2, but it also claims that MFR_ID,
>> MFR_MODEL and MFR_REVISION are supported.
>>
>> Block read returns what looks like a correct length, but the buffer
>> is empty.
>>>
>>> [ 195.246464] dps920ab 0-005a: PMBUS_MFR_ID length: 5
>>> [ 195.251495] dps920ab 0-005a: PMBUS_MFR_ID:
>>> [ 195.300789] dps920ab 0-005b: PMBUS_MFR_ID length: 5
>>> [ 195.305762] dps920ab 0-005b: PMBUS_MFR_ID:
>>> [ 272.795222] dps920ab 0-005a: PMBUS_MFR_ID length: 5
>>> [ 272.800190] dps920ab 0-005a: PMBUS_MFR_ID:
>>> [ 272.804862] dps920ab 0-005a: PMBUS_MFR_MODEL length: 11
>>> [ 272.810172] dps920ab 0-005a: PMBUS_MFR_MODEL:
>>> [ 272.815098] dps920ab 0-005a: PMBUS_MFR_REVISION length: 2
>>> [ 272.820600] dps920ab 0-005a: PMBUS_MFR_REVISION:
>>> [ 272.874060] dps920ab 0-005b: PMBUS_MFR_ID length: 5
>>> [ 272.879102] dps920ab 0-005b: PMBUS_MFR_ID:
>>> [ 272.883833] dps920ab 0-005b: PMBUS_MFR_MODEL length: 11
>>> [ 272.889151] dps920ab 0-005b: PMBUS_MFR_MODEL:
>>> [ 272.894097] dps920ab 0-005b: PMBUS_MFR_REVISION length: 2
>>> [ 272.899548] dps920ab 0-005b: PMBUS_MFR_REVISION:
>>
>>
>> However, manually reading using i2cget in word mode returns
>> something that looks ok.
>> i2cget -y 0 0x5a 0x9a w
>> 0x440b
>>
>> This would be D is ASCII, it looks like any kind of block read fails actually.
>
> Ok, so after using i2c_smbus_read_i2c_block_data() I can actually read
> the model kind of OK.
> There actually are 10 bytes of valid data, no idea why
> i2c_smbus_read_block_data() does not work.
>>
>> [ 721.194706] dps920ab 0-005a: MFR MODEL:
>> DPS-920AB
>> [ 721.245502] dps920ab 0-005b: MFR MODEL:
>> DPS-920AB
>
> It behaves weirdly when printing by creating a newline before and
> stuff like that.
>

I suspect it prints the first byte, which should be the length.
I also suspect that the i2c controller driver has a bug and doesn't
support SMBus block data correctly. Did you try i2cdump with i and s
options ?

>> I tried applying the block support for mv64xx as well:
>> https://patchwork.ozlabs.org/project/linux-i2c/patch/20200118115820.9080-1-fuga@studiofuga.com/

That patch would be needed, but it looks buggy to me. This chunk:

+ drv_data->effective_length = data+1;
+ drv_data->bytes_left = data+1;
+ drv_data->msg->len = data+1;

should be:

+ drv_data->effective_length = data+1;
+ drv_data->bytes_left = data;
+ drv_data->msg->len = data+1;

It should also make sure that 'data' is not larger than I2C_SMBUS_BLOCK_MAX,
and bail out if it isn't.

Do you see a difference with the patch applied ?

Guenter

\
 
 \ /
  Last update: 2021-05-27 16:03    [W:0.088 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site