lkml.org 
[lkml]   [2021]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 0/2] hwspinlock: add sun6i hardware spinlock support
On Tue 25 May 11:07 CDT 2021, Wilken Gottwalt wrote:

> On Mon, 15 Mar 2021 23:33:31 -0500
> Samuel Holland <samuel@sholland.org> wrote:
>
> > On 3/14/21 4:30 AM, Wilken Gottwalt wrote:
> > > Wilken Gottwalt (2):
> > > dt-bindings: hwlock: add sun6i_hwspinlock
> > > hwspinlock: add sun6i hardware spinlock support
> > >
> > > .../allwinner,sun6i-a31-hwspinlock.yaml | 45 ++++
> > > MAINTAINERS | 6 +
> > > drivers/hwspinlock/Kconfig | 9 +
> > > drivers/hwspinlock/Makefile | 1 +
> > > drivers/hwspinlock/sun6i_hwspinlock.c | 210 ++++++++++++++++++
> > > 5 files changed, 271 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
> > > create mode 100644 drivers/hwspinlock/sun6i_hwspinlock.c
> > >
> >
> > Thanks for the very thorough testing!
>
> So when will this end up in mainstream? Or do I have to somehing to get this
> triggered? This is not my first driver and back then it was included into
> mainline without anything special on my side. I'm a bit confused. Did I miss
> something?
>

Sorry, I wasn't paying enough attention and you didn't Cc
linux-remoteproc@ (as described in MAINTAINERS) so I lost track of the
patch.

It's now been applied, I'll do some build testing on the way out but it
should show up in linux-next in the coming days.

Thank you,
Bjorn

\
 
 \ /
  Last update: 2021-05-28 05:24    [W:0.066 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site