lkml.org 
[lkml]   [2021]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231
On Mon, May 24, 2021 at 12:34 AM Sander Vanheule <sander@svanheule.net> wrote:

> Add a binding description for the Realtek RTL8231, a GPIO and LED
> expander chip commonly used in ethernet switches based on a Realtek
> switch SoC. These chips can be addressed via an MDIO or SMI bus, or used
> as a plain 36-bit shift register.
>
> This binding only describes the feature set provided by the MDIO/SMI
> configuration, and covers the GPIO, PWM, and pin control properties. The
> LED properties are defined in a separate binding.
>
> Signed-off-by: Sander Vanheule <sander@svanheule.net>

This looks good to me from a GPIO and pin control PoV:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2021-05-28 01:32    [W:0.209 / U:3.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site