lkml.org 
[lkml]   [2021]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] remoteproc: Fix various kernel-doc warnings
From
Date
On 5/25/21 1:00 PM, Mathieu Poirier wrote:
> On Wed, May 19, 2021 at 01:03:04PM -0500, Suman Anna wrote:
>> Fix all the kernel-doc warnings in various remoteproc core files.
>> Some of them just needed a formatting cleanup change, while others
>> needed the Return statement to be added, or documenting the missed
>> structure elements.
>>
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> ---
>> drivers/remoteproc/remoteproc_core.c | 44 +++++++++++++------
>> drivers/remoteproc/remoteproc_elf_loader.c | 12 ++++--
>> drivers/remoteproc/remoteproc_virtio.c | 6 ++-
>> include/linux/remoteproc.h | 50 ++++++++++++----------
>> 4 files changed, 69 insertions(+), 43 deletions(-)
>>
>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>> index 8c279039b6a3..6348aaa42bbb 100644
>> --- a/drivers/remoteproc/remoteproc_core.c
>> +++ b/drivers/remoteproc/remoteproc_core.c
>> @@ -183,12 +183,12 @@ EXPORT_SYMBOL(rproc_va_to_pa);
>> * translations on the internal remoteproc memory regions through a platform
>> * implementation specific da_to_va ops, if present.
>> *
>> - * The function returns a valid kernel address on success or NULL on failure.
>> - *
>> * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too,
>> * but only on kernel direct mapped RAM memory. Instead, we're just using
>> * here the output of the DMA API for the carveouts, which should be more
>> * correct.
>> + *
>> + * Return: a valid kernel address on success or NULL on failure
>> */
>> void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
>> {
>> @@ -509,7 +509,7 @@ static int copy_dma_range_map(struct device *to, struct device *from)
>> * use RSC_DEVMEM resource entries to map their required @da to the physical
>> * address of their base CMA region (ouch, hacky!).
>> *
>> - * Returns 0 on success, or an appropriate error code otherwise
>> + * Return: 0 on success, or an appropriate error code otherwise
>> */
>> static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
>> int offset, int avail)
>> @@ -644,7 +644,7 @@ void rproc_vdev_release(struct kref *ref)
>> * support dynamically allocating this address using the generic
>> * DMA API (but currently there isn't a use case for that).
>> *
>> - * Returns 0 on success, or an appropriate error code otherwise
>> + * Return: 0 on success, or an appropriate error code otherwise
>> */
>> static int rproc_handle_trace(struct rproc *rproc, void *ptr,
>> int offset, int avail)
>> @@ -721,6 +721,8 @@ static int rproc_handle_trace(struct rproc *rproc, void *ptr,
>> * tell us ranges of physical addresses the firmware is allowed to request,
>> * and not allow firmwares to request access to physical addresses that
>> * are outside those ranges.
>> + *
>> + * Return: 0 on success, or an appropriate error code otherwise
>> */
>> static int rproc_handle_devmem(struct rproc *rproc, void *ptr,
>> int offset, int avail)
>> @@ -783,6 +785,8 @@ static int rproc_handle_devmem(struct rproc *rproc, void *ptr,
>> *
>> * This function allocate specified memory entry @mem using
>> * dma_alloc_coherent() as default allocator
>> + *
>> + * Return: 0 on success, or an appropriate error code otherwise
>> */
>> static int rproc_alloc_carveout(struct rproc *rproc,
>> struct rproc_mem_entry *mem)
>> @@ -889,6 +893,8 @@ static int rproc_alloc_carveout(struct rproc *rproc,
>> *
>> * This function releases specified memory entry @mem allocated via
>> * rproc_alloc_carveout() function by @rproc.
>> + *
>> + * Return: 0 on success, or an appropriate error code otherwise
>> */
>> static int rproc_release_carveout(struct rproc *rproc,
>> struct rproc_mem_entry *mem)
>> @@ -918,6 +924,8 @@ static int rproc_release_carveout(struct rproc *rproc,
>> * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
>> * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
>> * pressure is important; it may have a substantial impact on performance.
>> + *
>> + * Return: 0 on success, or an appropriate error code otherwise
>> */
>> static int rproc_handle_carveout(struct rproc *rproc,
>> void *ptr, int offset, int avail)
>> @@ -1006,6 +1014,8 @@ EXPORT_SYMBOL(rproc_add_carveout);
>> *
>> * This function allocates a rproc_mem_entry struct and fill it with parameters
>> * provided by client.
>> + *
>> + * Return: a valid pointer on success, or NULL on failure
>> */
>> __printf(8, 9)
>> struct rproc_mem_entry *
>> @@ -1050,6 +1060,8 @@ EXPORT_SYMBOL(rproc_mem_entry_init);
>> *
>> * This function allocates a rproc_mem_entry struct and fill it with parameters
>> * provided by client.
>> + *
>> + * Return: a valid pointer on success, or NULL on failure
>> */
>> __printf(5, 6)
>> struct rproc_mem_entry *
>> @@ -1881,6 +1893,8 @@ static int __rproc_detach(struct rproc *rproc)
>> * remoteproc functional again.
>> *
>> * This function can sleep, so it cannot be called from atomic context.
>> + *
>> + * Return: 0 on success or a negative value upon failure
>> */
>> int rproc_trigger_recovery(struct rproc *rproc)
>> {
>> @@ -1965,7 +1979,7 @@ static void rproc_crash_handler_work(struct work_struct *work)
>> * If the remote processor is already powered on, this function immediately
>> * returns (successfully).
>> *
>> - * Returns 0 on success, and an appropriate error value otherwise.
>> + * Return: 0 on success, and an appropriate error value otherwise
>> */
>> int rproc_boot(struct rproc *rproc)
>> {
>> @@ -2100,6 +2114,8 @@ EXPORT_SYMBOL(rproc_shutdown);
>> * no longer available. From there it should be possible to remove the
>> * platform driver and even power cycle the application processor (if the HW
>> * supports it) without needing to switch off the remote processor.
>> + *
>> + * Return: 0 on success, and an appropriate error value otherwise
>> */
>> int rproc_detach(struct rproc *rproc)
>> {
>> @@ -2152,7 +2168,7 @@ EXPORT_SYMBOL(rproc_detach);
>> * This function increments the remote processor's refcount, so always
>> * use rproc_put() to decrement it back once rproc isn't needed anymore.
>> *
>> - * Returns the rproc handle on success, and NULL on failure.
>> + * Return: rproc handle on success, and NULL on failure
>> */
>> #ifdef CONFIG_OF
>> struct rproc *rproc_get_by_phandle(phandle phandle)
>> @@ -2302,8 +2318,6 @@ static int rproc_validate(struct rproc *rproc)
>> * This is called by the platform-specific rproc implementation, whenever
>> * a new remote processor device is probed.
>> *
>> - * Returns 0 on success and an appropriate error code otherwise.
>> - *
>> * Note: this function initiates an asynchronous firmware loading
>> * context, which will look for virtio devices supported by the rproc's
>> * firmware.
>> @@ -2311,6 +2325,8 @@ static int rproc_validate(struct rproc *rproc)
>> * If found, those virtio devices will be created and added, so as a result
>> * of registering this remote processor, additional virtio drivers might be
>> * probed.
>> + *
>> + * Return: 0 on success and an appropriate error code otherwise
>> */
>> int rproc_add(struct rproc *rproc)
>> {
>> @@ -2364,7 +2380,7 @@ static void devm_rproc_remove(void *rproc)
>> * This function performs like rproc_add() but the registered rproc device will
>> * automatically be removed on driver detach.
>> *
>> - * Returns: 0 on success, negative errno on failure
>> + * Return: 0 on success, negative errno on failure
>> */
>> int devm_rproc_add(struct device *dev, struct rproc *rproc)
>> {
>> @@ -2472,10 +2488,10 @@ static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops)
>> * implementations should then call rproc_add() to complete
>> * the registration of the remote processor.
>> *
>> - * On success the new rproc is returned, and on failure, NULL.
>> - *
>> * Note: _never_ directly deallocate @rproc, even if it was not registered
>> * yet. Instead, when you need to unroll rproc_alloc(), use rproc_free().
>> + *
>> + * Return: new rproc pointer on success, and NULL on failure
>> */
>> struct rproc *rproc_alloc(struct device *dev, const char *name,
>> const struct rproc_ops *ops,
>> @@ -2588,7 +2604,7 @@ EXPORT_SYMBOL(rproc_put);
>> * of the outstanding reference created by rproc_alloc. To decrement that
>> * one last refcount, one still needs to call rproc_free().
>> *
>> - * Returns 0 on success and -EINVAL if @rproc isn't valid.
>> + * Return: 0 on success and -EINVAL if @rproc isn't valid
>> */
>> int rproc_del(struct rproc *rproc)
>> {
>> @@ -2635,7 +2651,7 @@ static void devm_rproc_free(struct device *dev, void *res)
>> * This function performs like rproc_alloc() but the acquired rproc device will
>> * automatically be released on driver detach.
>> *
>> - * Returns: new rproc instance, or NULL on failure
>> + * Return: new rproc instance, or NULL on failure
>> */
>> struct rproc *devm_rproc_alloc(struct device *dev, const char *name,
>> const struct rproc_ops *ops,
>> @@ -2687,7 +2703,7 @@ EXPORT_SYMBOL(rproc_remove_subdev);
>> * rproc_get_by_child() - acquire rproc handle of @dev's ancestor
>> * @dev: child device to find ancestor of
>> *
>> - * Returns the ancestor rproc instance, or NULL if not found.
>> + * Return: the ancestor rproc instance, or NULL if not found
>> */
>> struct rproc *rproc_get_by_child(struct device *dev)
>> {
>> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
>> index 11423588965a..469c52e62faf 100644
>> --- a/drivers/remoteproc/remoteproc_elf_loader.c
>> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
>> @@ -31,6 +31,8 @@
>> * @fw: the ELF firmware image
>> *
>> * Make sure this fw image is sane (ie a correct ELF32/ELF64 file).
>> + *
>> + * Return: 0 on success and -EINVAL upon any failure
>> */
>> int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
>> {
>> @@ -117,11 +119,11 @@ EXPORT_SYMBOL(rproc_elf_sanity_check);
>> * @rproc: the remote processor handle
>> * @fw: the ELF firmware image
>> *
>> - * This function returns the entry point address of the ELF
>> - * image.
>> - *
>> * Note that the boot address is not a configurable property of all remote
>> * processors. Some will always boot at a specific hard-coded address.
>> + *
>> + * Return: entry point address of the ELF image
>> + *
>> */
>> u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
>> {
>> @@ -152,6 +154,8 @@ EXPORT_SYMBOL(rproc_elf_get_boot_addr);
>> * might be different: they might not have iommus, and would prefer to
>> * directly allocate memory for every segment/resource. This is not yet
>> * supported, though.
>> + *
>> + * Return: 0 on success and an appropriate error code otherwise
>> */
>> int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
>> {
>> @@ -362,7 +366,7 @@ EXPORT_SYMBOL(rproc_elf_load_rsc_table);
>> * This function finds the location of the loaded resource table. Don't
>> * call this function if the table wasn't loaded yet - it's a bug if you do.
>> *
>> - * Returns the pointer to the resource table if it is found or NULL otherwise.
>> + * Return: pointer to the resource table if it is found or NULL otherwise.
>
> Here the '.' has been kept while it was remove for all of the above. I don't
> know that the right guidelines are for this.
>
>> * If the table wasn't loaded yet the result is unspecified.
>> */
>> struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
>> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
>> index 0cc617f76068..cf4d54e98e6a 100644
>> --- a/drivers/remoteproc/remoteproc_virtio.c
>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>> @@ -45,7 +45,7 @@ static bool rproc_virtio_notify(struct virtqueue *vq)
>> * when the remote processor signals that a specific virtqueue has pending
>> * messages available.
>> *
>> - * Returns IRQ_NONE if no message was found in the @notifyid virtqueue,
>> + * Return: IRQ_NONE if no message was found in the @notifyid virtqueue,
>> * and otherwise returns IRQ_HANDLED.
>
> Same
>
>> */
>> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int notifyid)
>> @@ -325,7 +325,7 @@ static void rproc_virtio_dev_release(struct device *dev)
>> * This function registers a virtio device. This vdev's partent is
>> * the rproc device.
>> *
>> - * Returns 0 on success or an appropriate error value otherwise.
>> + * Return: 0 on success or an appropriate error value otherwise
>> */
>> int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
>> {
>> @@ -432,6 +432,8 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
>> * @data: must be null
>> *
>> * This function unregisters an existing virtio device.
>> + *
>> + * Return: 0
>> */
>> int rproc_remove_virtio_dev(struct device *dev, void *data)
>> {
>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> index 8b795b544f75..42a1f30e33a7 100644
>> --- a/include/linux/remoteproc.h
>> +++ b/include/linux/remoteproc.h
>> @@ -243,7 +243,7 @@ struct fw_rsc_trace {
>> * @da: device address
>> * @align: the alignment between the consumer and producer parts of the vring
>> * @num: num of buffers supported by this vring (must be power of two)
>> - * @notifyid is a unique rproc-wide notify index for this vring. This notify
>> + * @notifyid: a unique rproc-wide notify index for this vring. This notify
>> * index is used when kicking a remote processor, to let it know that this
>> * vring is triggered.
>> * @pa: physical address
>> @@ -266,18 +266,18 @@ struct fw_rsc_vdev_vring {
>> /**
>> * struct fw_rsc_vdev - virtio device header
>> * @id: virtio device id (as in virtio_ids.h)
>> - * @notifyid is a unique rproc-wide notify index for this vdev. This notify
>> + * @notifyid: a unique rproc-wide notify index for this vdev. This notify
>> * index is used when kicking a remote processor, to let it know that the
>> * status/features of this vdev have changes.
>> - * @dfeatures specifies the virtio device features supported by the firmware
>> - * @gfeatures is a place holder used by the host to write back the
>> + * @dfeatures: specifies the virtio device features supported by the firmware
>> + * @gfeatures: a place holder used by the host to write back the
>> * negotiated features that are supported by both sides.
>> - * @config_len is the size of the virtio config space of this vdev. The config
>> + * @config_len: the size of the virtio config space of this vdev. The config
>> * space lies in the resource table immediate after this vdev header.
>> - * @status is a place holder where the host will indicate its virtio progress.
>> - * @num_of_vrings indicates how many vrings are described in this vdev header
>> + * @status: a place holder where the host will indicate its virtio progress.
>> + * @num_of_vrings: indicates how many vrings are described in this vdev header
>> * @reserved: reserved (must be zero)
>> - * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'.
>> + * @vring: an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'.
>> *
>> * This resource is a virtio device header: it provides information about
>> * the vdev, and is then used by the host and its peer remote processors
>> @@ -287,16 +287,17 @@ struct fw_rsc_vdev_vring {
>> * to statically allocate a vdev upon registration of the rproc (dynamic vdev
>> * allocation is not yet supported).
>> *
>> - * Note: unlike virtualization systems, the term 'host' here means
>> - * the Linux side which is running remoteproc to control the remote
>> - * processors. We use the name 'gfeatures' to comply with virtio's terms,
>> - * though there isn't really any virtualized guest OS here: it's the host
>> - * which is responsible for negotiating the final features.
>> - * Yeah, it's a bit confusing.
>> - *
>> - * Note: immediately following this structure is the virtio config space for
>> - * this vdev (which is specific to the vdev; for more info, read the virtio
>> - * spec). the size of the config space is specified by @config_len.
>> + * Note:
>> + * 1. unlike virtualization systems, the term 'host' here means
>> + * the Linux side which is running remoteproc to control the remote
>> + * processors. We use the name 'gfeatures' to comply with virtio's terms,
>> + * though there isn't really any virtualized guest OS here: it's the host
>> + * which is responsible for negotiating the final features.
>> + * Yeah, it's a bit confusing.
>> + *
>> + * 2. immediately following this structure is the virtio config space for
>> + * this vdev (which is specific to the vdev; for more info, read the virtio
>> + * spec). the size of the config space is specified by @config_len.
>
> s/the/The
>
>> */
>> struct fw_rsc_vdev {
>> u32 id;
>> @@ -440,7 +441,7 @@ enum rproc_state {
>> * enum rproc_crash_type - remote processor crash types
>> * @RPROC_MMUFAULT: iommu fault
>> * @RPROC_WATCHDOG: watchdog bite
>> - * @RPROC_FATAL_ERROR fatal error
>> + * @RPROC_FATAL_ERROR: fatal error
>> *
>> * Each element of the enum is used as an array index. So that, the value of
>> * the elements should be always something sane.
>> @@ -457,9 +458,9 @@ enum rproc_crash_type {
>> * enum rproc_dump_mechanism - Coredump options for core
>> * @RPROC_COREDUMP_DISABLED: Don't perform any dump
>> * @RPROC_COREDUMP_ENABLED: Copy dump to separate buffer and carry on with
>> - recovery
>> + * recovery
>> * @RPROC_COREDUMP_INLINE: Read segments directly from device memory. Stall
>> - recovery until all segments are read
>> + * recovery until all segments are read
>> */
>> enum rproc_dump_mechanism {
>> RPROC_COREDUMP_DISABLED,
>> @@ -475,6 +476,7 @@ enum rproc_dump_mechanism {
>> * @priv: private data associated with the dump_segment
>> * @dump: custom dump function to fill device memory segment associated
>> * with coredump
>> + * @offset: offset of the segment
>> */
>> struct rproc_dump_segment {
>> struct list_head node;
>> @@ -524,7 +526,9 @@ struct rproc_dump_segment {
>> * @auto_boot: flag to indicate if remote processor should be auto-started
>> * @dump_segments: list of segments in the firmware
>> * @nb_vdev: number of vdev currently handled by rproc
>> - * @char_dev: character device of the rproc
>> + * @elf_class: firmware ELF class
>> + * @elf_machine: firmware ELF machine
>> + * @cdev: character device of the rproc
>> * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release
>> */
>> struct rproc {
>> @@ -613,10 +617,10 @@ struct rproc_vring {
>> * struct rproc_vdev - remoteproc state for a supported virtio device
>> * @refcount: reference counter for the vdev and vring allocations
>> * @subdev: handle for registering the vdev as a rproc subdevice
>> + * @dev: device struct used for reference count semantics
>> * @id: virtio device id (as in virtio_ids.h)
>> * @node: list node
>> * @rproc: the rproc handle
>> - * @vdev: the virio device
>> * @vring: the vrings for this vdev
>> * @rsc_offset: offset of the vdev's resource entry
>> * @index: vdev position versus other vdev declared in resource table
>
> With or without the above:
>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Thanks Mathieu.

Bjorn,
Any preferences, let me know if you want me to quickly respin this patch, or if
you want to fixup locally while applying?

regards
Suman

\
 
 \ /
  Last update: 2021-05-25 20:07    [W:0.130 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site