lkml.org 
[lkml]   [2021]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 4/6] net: wan: add some required spaces
Date
From: Peng Li <lipeng321@huawei.com>

Add space required after that close brace '}'.
Add space required before the open parenthesis '(' and '{'

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
drivers/net/wan/n2.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index 180fb2c9a442..2f602171cbc6 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -101,7 +101,7 @@ typedef struct port_s {
u8 rxs, txs, tmc; /* SCA registers */
u8 phy_node; /* physical port # - 0 or 1 */
u8 log_node; /* logical port # */
-}port_t;
+} port_t;

typedef struct card_s {
u8 __iomem *winbase; /* ISA window base address */
@@ -115,7 +115,7 @@ typedef struct card_s {

port_t ports[2];
struct card_s *next_card;
-}card_t;
+} card_t;

static card_t *first_card;
static card_t **new_card = &first_card;
@@ -158,7 +158,7 @@ static void n2_set_iface(port_t *port)
u8 rxs = port->rxs & CLK_BRG_MASK;
u8 txs = port->txs & CLK_BRG_MASK;

- switch(port->settings.clock_type) {
+ switch (port->settings.clock_type) {
case CLOCK_INT:
mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
rxs |= CLK_BRG_RX; /* BRG output */
@@ -241,7 +241,7 @@ static int n2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (cmd != SIOCWANDEV)
return hdlc_ioctl(dev, ifr, cmd);

- switch(ifr->ifr_settings.type) {
+ switch (ifr->ifr_settings.type) {
case IF_GET_IFACE:
ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
if (ifr->ifr_settings.size < size) {
@@ -253,7 +253,7 @@ static int n2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return 0;

case IF_IFACE_SYNC_SERIAL:
- if(!capable(CAP_NET_ADMIN))
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;

if (copy_from_user(&new_line, line, size))
@@ -494,7 +494,7 @@ static int __init n2_init(void)

if (*hw++ != ',')
break;
- while(1) {
+ while (1) {
if (*hw == '0' && !valid[0])
valid[0] = 1; /* Port 0 enabled */
else if (*hw == '1' && !valid[1])
@@ -512,7 +512,7 @@ static int __init n2_init(void)

if (*hw == '\x0')
return first_card ? 0 : -EINVAL;
- }while(*hw++ == ':');
+ } while (*hw++ == ':');

pr_err("invalid hardware parameters\n");
return first_card ? 0 : -EINVAL;
--
2.8.1
\
 
 \ /
  Last update: 2021-05-25 16:12    [W:0.076 / U:1.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site