lkml.org 
[lkml]   [2021]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] mmc: mxs-mmc: Disable the 'reg_vmmc' regulator when needed
Date
Le 24/05/2021 à 15:59, Ulf Hansson a écrit :
> On Fri, 21 May 2021 at 14:36, Christophe JAILLET
> <christophe.jaillet@wanadoo.fr> wrote:
>>
>> The 'reg_vmmc' regulator is never disabled. Neither in the error handling
>> of the probe, nor in the remove function.
>>
>> Add a managed action to do the required clean-up before a 'regulator_put()'
>> call.
>>
>> Fixes: 4dc5a79f1350 ("mmc: mxs-mmc: enable regulator for mmc slot")
>> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>> ---
>> drivers/mmc/host/mxs-mmc.c | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
>> index 947581de7860..b043d53dd728 100644
>> --- a/drivers/mmc/host/mxs-mmc.c
>> +++ b/drivers/mmc/host/mxs-mmc.c
>> @@ -552,6 +552,13 @@ static const struct of_device_id mxs_mmc_dt_ids[] = {
>> };
>> MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
>>
>> +static void regulator_disable_action(void *_data)
>> +{
>> + struct regulator *regulator = _data;
>> +
>> + regulator_disable(regulator);
>> +}
>> +
>> static int mxs_mmc_probe(struct platform_device *pdev)
>> {
>> struct device_node *np = pdev->dev.of_node;
>> @@ -591,6 +598,10 @@ static int mxs_mmc_probe(struct platform_device *pdev)
>> "Failed to enable vmmc regulator: %d\n", ret);
>> goto out_mmc_free;
>> }
>> + ret = devm_add_action_or_reset(&pdev->dev,
>> + regulator_disable_action, reg_vmmc);
>> + if (ret)
>> + goto out_mmc_free;
>
> Even if this improves the behaviour, there is a standardized way for
> how we deal with regulators for mmc.
>
> 1. Call mmc_regulator_get_supply() during probe to fetch the optional
> regulator. If a regulator is found a corresponding OCR mask, in
> host->ocr_avail is assigned.
>
> 2. In the ->set_ios() callback, invoke mmc_regulator_set_ocr(). This
> will also set the correct voltage-level and turn on/off the regulator,
> depending on the requested OCR/voltage-level.

Hi,
I don't know this API.
I've tried to look at a few drivers to see how it was used, but it
didn't help me either.

So, I won't be able to provide any other proposal on this. It would only
be trial/error.
It is yours if something needs to be fixed here.

Anyway, thanks for your time for answering and trying to show the right
direction.

CJ

>
>> }
>>
>> ssp->clk = devm_clk_get(&pdev->dev, NULL);
>> --
>> 2.30.2
>>
>
> Kind regards
> Uffe
>

\
 
 \ /
  Last update: 2021-05-25 21:33    [W:0.052 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site