lkml.org 
[lkml]   [2021]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/6] hwmon: (pmbus/pim4328) Add support for reading direct format coefficients
Date
Add support for reading and decoding direct format coefficients to
the PMBus core driver. If the new flag PMBUS_USE_COEFFICIENTS_CMD
is set, the driver will use the COEFFICIENTS register together with
the information in the pmbus_sensor_attr structs to initialize
relevant coefficients for the direct mode format.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
---
drivers/hwmon/pmbus/pmbus_core.c | 82 ++++++++++++++++++++++++++++++++
include/linux/pmbus.h | 8 ++++
2 files changed, 90 insertions(+)

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 460cbfd716e4..32e29f6dee38 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2177,6 +2177,77 @@ static int pmbus_find_attributes(struct i2c_client *client,
return ret;
}

+/*
+ * The pmbus_class_attr_map structure maps one sensor class to
+ * it's corresponding sensor attributes array.
+ */
+struct pmbus_class_attr_map {
+ enum pmbus_sensor_classes class;
+ u8 nattr;
+ const struct pmbus_sensor_attr *attr;
+};
+
+static const struct pmbus_class_attr_map class_attr_map[] = {
+ {
+ .class = PSC_VOLTAGE_IN,
+ .attr = voltage_attributes,
+ .nattr = ARRAY_SIZE(voltage_attributes),
+ }, {
+ .class = PSC_VOLTAGE_OUT,
+ .attr = voltage_attributes,
+ .nattr = ARRAY_SIZE(voltage_attributes),
+ }, {
+ .class = PSC_CURRENT_IN,
+ .attr = current_attributes,
+ .nattr = ARRAY_SIZE(current_attributes),
+ }, {
+ .class = PSC_CURRENT_OUT,
+ .attr = current_attributes,
+ .nattr = ARRAY_SIZE(current_attributes),
+ }, {
+ .class = PSC_POWER,
+ .attr = power_attributes,
+ .nattr = ARRAY_SIZE(power_attributes),
+ }, {
+ .class = PSC_TEMPERATURE,
+ .attr = temp_attributes,
+ .nattr = ARRAY_SIZE(temp_attributes),
+ }
+};
+
+static int pmbus_init_coefficients(struct i2c_client *client,
+ struct pmbus_data *data)
+{
+ int i, n;
+ int ret = 0;
+ const struct pmbus_class_attr_map *map;
+ const struct pmbus_sensor_attr *attr;
+
+ for (i = 0; i < ARRAY_SIZE(class_attr_map); i++) {
+ map = &class_attr_map[i];
+ if (data->info->format[map->class] != direct)
+ continue;
+ for (n = 0; n < map->nattr; n++) {
+ attr = &map->attr[n];
+ if (map->class != attr->class)
+ continue;
+ ret = pmbus_read_coefficients(client,
+ (struct pmbus_driver_info *)data->info,
+ attr->class,
+ attr->reg);
+ if (ret >= 0)
+ break;
+ }
+ if (ret < 0) {
+ dev_err(&client->dev, "No coefficients found for sensor class %d\n",
+ map->class);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
/*
* Identify chip parameters.
* This function is called for all chips.
@@ -2296,6 +2367,17 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
return ret;
}
}
+
+ if (data->flags & PMBUS_USE_COEFFICIENTS_CMD) {
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL))
+ return -ENODEV;
+
+ ret = pmbus_init_coefficients(client, data);
+ if (ret < 0)
+ return ret;
+ }
+
return 0;
}

diff --git a/include/linux/pmbus.h b/include/linux/pmbus.h
index f720470b1bab..7fdc282dab5a 100644
--- a/include/linux/pmbus.h
+++ b/include/linux/pmbus.h
@@ -52,6 +52,14 @@
*/
#define PMBUS_NO_WRITE_PROTECT BIT(4)

+/*
+ * PMBUS_USE_COEFFICIENTS_CMD
+ *
+ * When this flag is set the PMBus core driver will use the COEFFICIENTS
+ * register to initialize the coefficients for the direct mode format.
+ */
+#define PMBUS_USE_COEFFICIENTS_CMD BIT(5)
+
struct pmbus_platform_data {
u32 flags; /* Device specific flags */

--
2.20.1
\
 
 \ /
  Last update: 2021-05-24 17:16    [W:0.084 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site