lkml.org 
[lkml]   [2021]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio
On Thu, May 13, 2021 at 03:13:15PM +0200, Tobias Schramm wrote:
> Commit 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll")
> changed the audio pll on the Allwinner V3s and V3 SoCs to use
> sigma-delta modulation. In the process the declaration of fixed postdivider
> providing "pll-audio" was adjusted to provide the desired clock rates from
> the now sigma-delta modulated pll.
> However, while the divider used for calculations by the clock framework
> was adjusted the actual divider programmed into the hardware in
> sun8i_v3_v3s_ccu_init was left at "divide by four". This broke the
> "pll-audio" clock, now only providing quater the expected clock rate.
> It would in general be desirable to program the postdivider for
> "pll-audio" to four, such that a broader range of frequencies were
> available on the pll outputs. But the clock for the integrated codec
> "ac-dig" does not feature a mux that allows to select from all pll outputs
> as it is just a simple clock gate connected to "pll-audio". Thus we need
> to set the postdivider to one to be able to provide the 22.5792MHz and
> 24.576MHz rates required by the internal sun4i codec.
>
> This patches fixes the incorrect clock rate by forcing the postdivider to
> one in sun8i_v3_v3s_ccu_init.
>
> Fixes: 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll")
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>

Applied, thanks
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-05-24 13:58    [W:0.042 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site