lkml.org 
[lkml]   [2021]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
On Sun 23 May 16:18 CDT 2021, Martin Botka wrote:

> Document the newly added SM6125 pinctrl driver
>
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> ---
> Changes in V2:
> Add commit description
> .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 161 ++++++++++++++++++
> 1 file changed, 161 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
> new file mode 100644
> index 000000000000..951348953c11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +title: Qualcomm Technologies, Inc. SM6125 TLMM block
> +
> +maintainers:
> + - Martin Botka <martin.botka@somainline.org>
> +
> +description: |
> + This binding describes the Top Level Mode Multiplexer (TLMM) block found
> + in the SM6125 platform.
> +
> +allOf:
> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> + compatible:
> + const: qcom,sm6125-tlmm
> +
> + reg:
> + maxItems: 1

Driver (and example) defines 3 tiles.

> +
> + interrupts: true
> + interrupt-controller: true
> + '#interrupt-cells': true
> + gpio-controller: true
> + gpio-reserved-ranges: true
> + '#gpio-cells': true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +patternProperties:
> + '-state$':
> + oneOf:
> + - $ref: "#/$defs/qcom-sm6125-tlmm-state"
> + - patternProperties:
> + ".*":
> + $ref: "#/$defs/qcom-sm6125-tlmm-state"
> +
> +$defs:
> + qcom-sm6125-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + oneOf:
> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"

This pattern allows gpio0-9, gpio10-99, gpio100-199 and gpio200-203. I
think you're looking for something in line with:

"^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"

> + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> +
> + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
> + atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
> + atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
> + atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
> + audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
> + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
> + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
> + ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
> + dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
> + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
> + ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
> + mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
> + nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
> + phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
> + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2,
> + phase_flag20, phase_flag21, phase_flag22, phase_flag23, phase_flag24,
> + phase_flag25, phase_flag26, phase_flag27, phase_flag28, phase_flag29,
> + phase_flag3, phase_flag30, phase_flag31, phase_flag4, phase_flag5,
> + phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
> + pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb,
> + qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
> + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2,
> + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8,
> + qdss_gpio9, qlink_enable, qlink_request, qua_mi2s, qui_mi2s, qup00,
> + qup01, qup02, qup03, qup04, qup10, qup11, qup12, qup13, qup14,
> + sd_write, sec_mi2s, sp_cmu, swr_rx, swr_tx, ter_mi2s, tgu_ch0,
> + tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, uim1_clk, uim1_data,
> + uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
> + uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
> + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
> +
> +
> + bias-disable: true
> + bias-pull-down: true
> + bias-pull-up: true
> + drive-strength: true
> + input-enable: true
> + output-high: true
> + output-low: true
> +
> + required:
> + - pins
> + - function
> +
> + additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + pinctrl@500000 {
> + compatible = "qcom,sm6125-pinctrl";

s/pinconf/tlmm/

> + reg = <0x00500000 0x400000>,
> + <0x00900000 0x400000>,
> + <0x00d00000 0x400000>;
> + reg-names = "west", "south", "east";
> + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + gpio-ranges = <&tlmm 0 0 134>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + sdc2_state_on: sdc2-on {

Per the binding the node name needs to end in "-state".

> + pinconf-clk {

There's no risk of name collisions in the state, so you should drop the
"pinconf-" prefix.

Regards,
Bjorn

> + pins = "sdc2_clk";
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> + pinconf-cmd {
> + pins = "sdc2_cmd";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + pinconf-data {
> + pins = "sdc2_data";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + pinconf-sd-cd {
> + pins = "gpio98";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> + };
> + };
> +...
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2021-05-25 05:47    [W:0.050 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site