lkml.org 
[lkml]   [2021]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Openipmi-developer] [PATCH v3 05/16] ipmi: kcs bmc: Tur n the driver data-structures inside-out


On Tue, 25 May 2021, at 01:11, Corey Minyard wrote:
> On Mon, May 24, 2021 at 10:23:36AM +0930, Andrew Jeffery wrote:
> >
> >
> > On Sat, 22 May 2021, at 02:44, Corey Minyard wrote:
> > > On Mon, May 10, 2021 at 03:12:02PM +0930, Andrew Jeffery wrote:
> > > > Make the KCS device drivers responsible for allocating their own memory.
> > > >
> > > > Until now the private data for the device driver was allocated internal
> > > > to the private data for the chardev interface. This coupling required
> > > > the slightly awkward API of passing through the struct size for the
> > > > driver private data to the chardev constructor, and then retrieving a
> > > > pointer to the driver private data from the allocated chardev memory.
> > > >
> > > > In addition to being awkward, the arrangement prevents the
> > > > implementation of alternative userspace interfaces as the device driver
> > > > private data is not independent.
> > > >
> > > > Peel a layer off the onion and turn the data-structures inside out by
> > > > exploiting container_of() and embedding `struct kcs_device` in the
> > > > driver private data.
> > >
> > > All in all a very nice cleanup. A few nits inline.
> > >
> > > >
> > > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> > > > Reviewed-by: Zev Weiss <zweiss@equinix.com>
> > > > ---
> > > > drivers/char/ipmi/kcs_bmc.c | 19 +++++++--
> > > > drivers/char/ipmi/kcs_bmc.h | 12 ++----
> > > > drivers/char/ipmi/kcs_bmc_aspeed.c | 56 +++++++++++++------------
> > > > drivers/char/ipmi/kcs_bmc_cdev_ipmi.c | 60 ++++++++++++++++++---------
> > > > drivers/char/ipmi/kcs_bmc_npcm7xx.c | 37 ++++++++++-------
> > > > 5 files changed, 111 insertions(+), 73 deletions(-)
> > > >
> > > > diff --git a/drivers/char/ipmi/kcs_bmc.c b/drivers/char/ipmi/kcs_bmc.c
> > > > index ef5c48ffe74a..83da681bf49e 100644
> > > > --- a/drivers/char/ipmi/kcs_bmc.c
> > > > +++ b/drivers/char/ipmi/kcs_bmc.c
> > > > @@ -44,12 +44,23 @@ int kcs_bmc_handle_event(struct kcs_bmc *kcs_bmc)
> > > > }
> > > > EXPORT_SYMBOL(kcs_bmc_handle_event);
> > > >
> > > > -struct kcs_bmc *kcs_bmc_ipmi_alloc(struct device *dev, int sizeof_priv, u32 channel);
> > > > -struct kcs_bmc *kcs_bmc_alloc(struct device *dev, int sizeof_priv, u32 channel)
> > > > +int kcs_bmc_ipmi_add_device(struct kcs_bmc *kcs_bmc);
> > >
> > > The above (and it's remove function) should be in an include file.
> >
> > This is a short-term hack while I'm refactoring the code. It goes away
> > in a later patch when we switch to using an ops struct.
> >
> > I didn't move it to a header as it's an implementation detail at the
> > end of the day. I see headers as describing a public interface, and in
> > the bigger picture this function isn't part of the public API. But
> > maybe it's too tricky by half. My approach here generated some
> > discussion with Zev as well.
> >
> > >
> > > > +void kcs_bmc_add_device(struct kcs_bmc *kcs_bmc)
> > >
> > > This should return an error so the probe can be failed and cleaned up
> > > and so confusing message don't get printed after this in one case.
> >
> > Hmm. I did this because the end result of the series is that we can
> > have multiple chardev interfaces in distinct modules exposing the one
> > KCS device in the one kernel. If more than one of the chardev modules
> > is configured in and one of them fails to initialise themselves with
> > respect to the device driver I didn't think it was right to fail the
> > probe of the device driver (and thus remove any chardev interfaces that
> > did succeed to initialise against it).
> >
> > But this does limit the usefulness of the device driver instance in the
> > case that only one of the chardev interfaces is configured in and it
> > fails to initialise.
> >
> > So I think we need to decide on the direction before I adjust the
> > interface here. The patches are architected around the idea of multiple
> > chardevs being configured in to the kernel build and all are exposed at
> > runtime.
>
> Ok, I understand. The host IPMI driver will attempt to start all
> interfaces, if none fail to come up it will return an error, but if any
> come up it will not return an error. So it's a similar situation.

That sounds reasonable. I'll implement this strategy.

>
> I stole that from something else, but I can't remember what. I don't
> know what the best policy is, really, that was kind of a compromise and
> nobody has complained about it.
>
> I will say that the success print in aspeed_kcs_probe() needs to not
> happen if there is a failure, though.

With the strategy you outlined above that's easy enough.

Thanks,

Andrew

\
 
 \ /
  Last update: 2021-05-25 02:13    [W:0.232 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site