lkml.org 
[lkml]   [2021]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] PCI: Visconti: Add Toshiba Visconti PCIe host controller driver
[+cc Kishon for cpu_addr_fixup() question]

Please make the subject "PCI: visconti: Add ..." since the driver
names are usually lower-case. When referring to the hardware itself,
use "Visconti", of course.

On Mon, May 24, 2021 at 03:30:03PM +0900, Nobuhiro Iwamatsu wrote:
> Add support to PCIe RC controller on Toshiba Visconti ARM SoCs. PCIe
> controller is based of Synopsys DesignWare PCIe core.
>
> This patch does not yet use the clock framework to control the clock.
> This will be replaced in the future.
>
> v2 -> v3:
> - Update subject.
> - Wrap description in 75 columns.
> - Change config name to PCIE_VISCONTI_HOST.
> - Update Kconfig text.
> - Drop blank lines.
> - Adjusted to 80 columns.
> - Drop inline from functions for register access.
> - Changed function name from visconti_pcie_check_link_status to
> visconti_pcie_link_up.
> - Update to using dw_pcie_host_init().
> - Reorder these in the order of use in visconti_pcie_establish_link.
> - Rewrite visconti_pcie_host_init() without dw_pcie_setup_rc().
> - Change function name from visconti_device_turnon() to
> visconti_pcie_power_on().
> - Unify formats such as dev_err().
> - Drop error label in visconti_add_pcie_port().
>
> v1 -> v2:
> - Fix typo in commit message.
> - Drop "depends on OF && HAS_IOMEM" from Kconfig.
> - Stop using the pointer of struct dw_pcie.
> - Use _relaxed variant.
> - Drop dw_pcie_wait_for_link.
> - Drop dbi resource processing.
> - Drop MSI IRQ initialization processing.

Thanks for the changelog. Please move it after the "---" line for
future versions. That way it won't appear in the commit log when this
is merged. The notes about v1->v2, v2->v3, etc are useful during
review, but not after this is merged.

> Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
> drivers/pci/controller/dwc/Kconfig | 9 +
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pcie-visconti.c | 369 +++++++++++++++++++++
> 3 files changed, 379 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pcie-visconti.c
>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 423d35872ce4..7c3dcb86fcad 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -286,6 +286,15 @@ config PCIE_TEGRA194_EP
> in order to enable device-specific features PCIE_TEGRA194_EP must be
> selected. This uses the DesignWare core.
>
> +config PCIE_VISCONTI_HOST
> + bool "Toshiba Visconti PCIe controllers"
> + depends on ARCH_VISCONTI || COMPILE_TEST
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIE_DW_HOST
> + help
> + Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
> + This driver supports TMPV7708 SoC.
> +
> config PCIE_UNIPHIER
> bool "Socionext UniPhier PCIe host controllers"
> depends on ARCH_UNIPHIER || COMPILE_TEST
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index eca805c1a023..0b569d54deb3 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
> obj-$(CONFIG_PCI_MESON) += pci-meson.o
> obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> +obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-visconti.c b/drivers/pci/controller/dwc/pcie-visconti.c
> new file mode 100644
> index 000000000000..b764334f32e6
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-visconti.c
> @@ -0,0 +1,369 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DWC PCIe RC driver for Toshiba Visconti ARM SoC
> + *
> + * Copyright (C) 2021 Toshiba Electronic Device & Storage Corporation
> + * Copyright (C) 2021 TOSHIBA CORPORATION
> + *
> + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/interrupt.h>
> +#include <linux/init.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/of_platform.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +#include <linux/types.h>
> +
> +#include "pcie-designware.h"
> +#include "../../pci.h"
> +
> +struct visconti_pcie {
> + struct dw_pcie pci;
> + void __iomem *ulreg_base;
> + void __iomem *smu_base;
> + void __iomem *mpu_base;
> + struct clk *refclk;
> + struct clk *sysclk;
> + struct clk *auxclk;
> +};
> +
> +#define PCIE_UL_REG_S_PCIE_MODE 0x00F4
> +#define PCIE_UL_REG_S_PCIE_MODE_EP 0x00
> +#define PCIE_UL_REG_S_PCIE_MODE_RC 0x04
> +
> +#define PCIE_UL_REG_S_PERSTN_CTRL 0x00F8
> +#define PCIE_UL_IOM_PCIE_PERSTN_I_EN BIT(3)
> +#define PCIE_UL_DIRECT_PERSTN_EN BIT(2)
> +#define PCIE_UL_PERSTN_OUT BIT(1)
> +#define PCIE_UL_DIRECT_PERSTN BIT(0)
> +#define PCIE_UL_REG_S_PERSTN_CTRL_INIT (PCIE_UL_IOM_PCIE_PERSTN_I_EN | \
> + PCIE_UL_DIRECT_PERSTN_EN | \
> + PCIE_UL_DIRECT_PERSTN)
> +
> +#define PCIE_UL_REG_S_PHY_INIT_02 0x0104
> +#define PCIE_UL_PHY0_SRAM_EXT_LD_DONE BIT(0)
> +
> +#define PCIE_UL_REG_S_PHY_INIT_03 0x0108
> +#define PCIE_UL_PHY0_SRAM_INIT_DONE BIT(0)
> +
> +#define PCIE_UL_REG_S_INT_EVENT_MASK1 0x0138
> +#define PCIE_UL_CFG_PME_INT BIT(0)
> +#define PCIE_UL_CFG_LINK_EQ_REQ_INT BIT(1)
> +#define PCIE_UL_EDMA_INT0 BIT(2)
> +#define PCIE_UL_EDMA_INT1 BIT(3)
> +#define PCIE_UL_EDMA_INT2 BIT(4)
> +#define PCIE_UL_EDMA_INT3 BIT(5)
> +#define PCIE_UL_S_INT_EVENT_MASK1_ALL (PCIE_UL_CFG_PME_INT | \
> + PCIE_UL_CFG_LINK_EQ_REQ_INT | \
> + PCIE_UL_EDMA_INT0 | \
> + PCIE_UL_EDMA_INT1 | \
> + PCIE_UL_EDMA_INT2 | \
> + PCIE_UL_EDMA_INT3)
> +
> +#define PCIE_UL_REG_S_SB_MON 0x0198
> +#define PCIE_UL_REG_S_SIG_MON 0x019C
> +#define PCIE_UL_CORE_RST_N_MON BIT(0)
> +
> +#define PCIE_UL_REG_V_SII_DBG_00 0x0844
> +#define PCIE_UL_REG_V_SII_GEN_CTRL_01 0x0860
> +#define PCIE_UL_APP_LTSSM_ENABLE BIT(0)
> +
> +#define PCIE_UL_REG_V_PHY_ST_00 0x0864
> +#define PCIE_UL_SMLH_LINK_UP BIT(0)
> +
> +#define PCIE_UL_REG_V_PHY_ST_02 0x0868
> +#define PCIE_UL_S_DETECT_ACT 0x01
> +#define PCIE_UL_S_L0 0x11
> +
> +#define PISMU_CKON_PCIE 0x0038
> +#define PISMU_CKON_PCIE_AUX_CLK BIT(1)
> +#define PISMU_CKON_PCIE_MSTR_ACLK BIT(0)
> +
> +#define PISMU_RSOFF_PCIE 0x0538
> +#define PISMU_RSOFF_PCIE_ULREG_RST_N BIT(1)
> +#define PISMU_RSOFF_PCIE_PWR_UP_RST_N BIT(0)
> +
> +#define PCIE_MPU_REG_MP_EN 0x0
> +#define MPU_MP_EN_DISABLE BIT(0)
> +
> +#define PCIE_BUS_OFFSET 0x40000000
> +
> +/* Access registers in PCIe ulreg */
> +static void visconti_ulreg_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
> +{
> + writel_relaxed(val, pcie->ulreg_base + reg);
> +}
> +
> +static u32 visconti_ulreg_readl(struct visconti_pcie *pcie, u32 reg)
> +{
> + return readl_relaxed(pcie->ulreg_base + reg);
> +}
> +
> +/* Access registers in PCIe smu */
> +static void visconti_smu_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
> +{
> + writel_relaxed(val, pcie->smu_base + reg);
> +}
> +
> +/* Access registers in PCIe mpu */
> +static void visconti_mpu_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
> +{
> + writel_relaxed(val, pcie->mpu_base + reg);
> +}
> +
> +static u32 visconti_mpu_readl(struct visconti_pcie *pcie, u32 reg)
> +{
> + return readl_relaxed(pcie->mpu_base + reg);
> +}
> +
> +static int visconti_pcie_link_up(struct dw_pcie *pci)
> +{
> + struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
> + void __iomem *addr = pcie->ulreg_base;
> + int ret;
> + u32 val;
> +
> + /* wait for linkup of phy link layer */
> + ret = readl_relaxed_poll_timeout(addr + PCIE_UL_REG_V_PHY_ST_00,
> + val, (val & PCIE_UL_SMLH_LINK_UP),
> + 90000, 100000);
> + if (ret)
> + return 0;
> +
> + /* wait for linkup of data link layer */
> + ret = readl_relaxed_poll_timeout(addr + PCIE_UL_REG_V_PHY_ST_02,
> + val, (val & PCIE_UL_S_DETECT_ACT),
> + 90000, 100000);
> + if (ret)
> + return 0;
> +
> + /* wait for LTSSM Status */
> + ret = readl_relaxed_poll_timeout(addr + PCIE_UL_REG_V_PHY_ST_02,
> + val, (val & PCIE_UL_S_L0),
> + 90000, 100000);
> + if (ret)
> + return 0;
> + return 1;
> +}
> +
> +static int visconti_pcie_start_link(struct dw_pcie *pci)
> +{
> + struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
> +
> + visconti_ulreg_writel(pcie, PCIE_UL_APP_LTSSM_ENABLE,
> + PCIE_UL_REG_V_SII_GEN_CTRL_01);
> +
> + if (dw_pcie_link_up(pci)) {
> + u32 val;
> +
> + val = visconti_mpu_readl(pcie, PCIE_MPU_REG_MP_EN);
> + visconti_mpu_writel(pcie, val & ~MPU_MP_EN_DISABLE,
> + PCIE_MPU_REG_MP_EN);
> + visconti_ulreg_writel(pcie, PCIE_UL_S_INT_EVENT_MASK1_ALL,
> + PCIE_UL_REG_S_INT_EVENT_MASK1);
> + }
> +
> + return 0;
> +}
> +
> +static void visconti_pcie_stop_link(struct dw_pcie *pci)
> +{
> + struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
> + u32 val;
> +
> + val = visconti_ulreg_readl(pcie, PCIE_UL_REG_V_SII_GEN_CTRL_01);
> + val &= ~PCIE_UL_APP_LTSSM_ENABLE;
> + visconti_ulreg_writel(pcie, val, PCIE_UL_REG_V_SII_GEN_CTRL_01);
> +
> + val = visconti_mpu_readl(pcie, PCIE_MPU_REG_MP_EN);
> + visconti_mpu_writel(pcie, val | MPU_MP_EN_DISABLE, PCIE_MPU_REG_MP_EN);
> +}
> +
> +static u64 visconti_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr)
> +{
> + return pci_addr - PCIE_BUS_OFFSET;

This is called from __dw_pcie_prog_outbound_atu() as:

cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);

so I think the parameter here should be *cpu_addr*, not pci_addr.

dra7xx and artpec6 also call it "pci_addr", which is at best
confusing.

I'm also confused about exactly what .cpu_addr_fixup() does. Is it
applying an offset that cannot be deduced from the DT description? If
so, *should* this offset be described in DT?

> +}
> +
> +static const struct dw_pcie_ops dw_pcie_ops = {
> + .cpu_addr_fixup = visconti_pcie_cpu_addr_fixup,
> + .link_up = visconti_pcie_link_up,
> + .start_link = visconti_pcie_start_link,
> + .stop_link = visconti_pcie_stop_link,
> +};
> +
> +static int visconti_pcie_power_on(struct visconti_pcie *pcie)
> +{
> + void __iomem *addr;
> + int err;
> + u32 val;
> +
> + visconti_smu_writel(pcie,
> + PISMU_CKON_PCIE_AUX_CLK | PISMU_CKON_PCIE_MSTR_ACLK,
> + PISMU_CKON_PCIE);
> + ndelay(250);
> +
> + visconti_smu_writel(pcie, PISMU_RSOFF_PCIE_ULREG_RST_N,
> + PISMU_RSOFF_PCIE);
> + visconti_ulreg_writel(pcie, PCIE_UL_REG_S_PCIE_MODE_RC,
> + PCIE_UL_REG_S_PCIE_MODE);
> +
> + val = PCIE_UL_REG_S_PERSTN_CTRL_INIT;
> + visconti_ulreg_writel(pcie, val, PCIE_UL_REG_S_PERSTN_CTRL);
> + udelay(100);
> +
> + val |= PCIE_UL_PERSTN_OUT;
> + visconti_ulreg_writel(pcie, val, PCIE_UL_REG_S_PERSTN_CTRL);
> + udelay(100);
> +
> + visconti_smu_writel(pcie, PISMU_RSOFF_PCIE_PWR_UP_RST_N,
> + PISMU_RSOFF_PCIE);
> +
> + addr = pcie->ulreg_base + PCIE_UL_REG_S_PHY_INIT_03;
> + err = readl_relaxed_poll_timeout(addr, val,
> + (val & PCIE_UL_PHY0_SRAM_INIT_DONE),
> + 100, 1000);
> + if (err)
> + return err;
> +
> + visconti_ulreg_writel(pcie, PCIE_UL_PHY0_SRAM_EXT_LD_DONE,
> + PCIE_UL_REG_S_PHY_INIT_02);
> +
> + addr = pcie->ulreg_base + PCIE_UL_REG_S_SIG_MON;
> + return readl_relaxed_poll_timeout(addr, val,
> + (val & PCIE_UL_CORE_RST_N_MON), 100,
> + 1000);
> +}
> +
> +static int visconti_pcie_host_init(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
> +
> + return visconti_pcie_power_on(pcie);

This bears very little resemblance to the .host_init() functions of
other dwc-based drivers. It'd be nice if they were more consistent.
But if there are real hardware differences causing these driver
differences, that's ok. I see a couple (meson, kirin) that call a
*power_on() function from *_pcie_probe().

> +}
> +
> +static const struct dw_pcie_host_ops visconti_pcie_host_ops = {
> + .host_init = visconti_pcie_host_init,
> +};
> +
> +static int visconti_get_resources(struct platform_device *pdev,
> + struct visconti_pcie *pcie)
> +{
> + struct device *dev = &pdev->dev;
> +
> + pcie->ulreg_base = devm_platform_ioremap_resource_byname(pdev, "ulreg");
> + if (IS_ERR(pcie->ulreg_base))
> + return PTR_ERR(pcie->ulreg_base);
> +
> + pcie->smu_base = devm_platform_ioremap_resource_byname(pdev, "smu");
> + if (IS_ERR(pcie->smu_base))
> + return PTR_ERR(pcie->smu_base);
> +
> + pcie->mpu_base = devm_platform_ioremap_resource_byname(pdev, "mpu");
> + if (IS_ERR(pcie->mpu_base))
> + return PTR_ERR(pcie->mpu_base);
> +
> + pcie->refclk = devm_clk_get(dev, "pcie_refclk");
> + if (IS_ERR(pcie->refclk)) {
> + dev_err(dev, "Failed to get refclk clock: %ld\n",
> + PTR_ERR(pcie->refclk));
> + return PTR_ERR(pcie->refclk);
> + }
> +
> + pcie->sysclk = devm_clk_get(dev, "sysclk");
> + if (IS_ERR(pcie->sysclk)) {
> + dev_err(dev, "Failed to get sysclk clock: %ld\n",
> + PTR_ERR(pcie->sysclk));
> + return PTR_ERR(pcie->sysclk);
> + }
> +
> + pcie->auxclk = devm_clk_get(dev, "auxclk");
> + if (IS_ERR(pcie->auxclk)) {
> + dev_err(dev, "Failed to get auxclk clock: %ld\n",
> + PTR_ERR(pcie->auxclk));
> + return PTR_ERR(pcie->auxclk);
> + }
> +
> + return 0;
> +}
> +
> +static int
> +visconti_add_pcie_port(struct visconti_pcie *pcie, struct platform_device *pdev)
> +{
> + struct dw_pcie *pci = &pcie->pci;
> + struct pcie_port *pp = &pci->pp;
> + struct device *dev = &pdev->dev;
> +
> + pp->irq = platform_get_irq_byname(pdev, "intr");
> + if (pp->irq < 0) {
> + dev_err(dev, "Interrupt intr is missing");
> + return pp->irq;
> + }

Looks like most drivers use "pp->irq = platform_get_irq(pdev, 0);"
Is there a reason for this to be different?

> + pp->ops = &visconti_pcie_host_ops;
> +
> + pci->link_gen = of_pci_get_max_link_speed(pdev->dev.of_node);
> + if (pci->link_gen < 0 || pci->link_gen > 3) {
> + pci->link_gen = 3;
> + dev_dbg(dev, "Applied default link speed\n");
> + }
> +
> + dev_dbg(dev, "Link speed Gen %d", pci->link_gen);
> +
> + return dw_pcie_host_init(pp);
> +}
> +
> +static int visconti_pcie_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct visconti_pcie *pcie;
> + struct pcie_port *pp;
> + struct dw_pcie *pci;
> + int ret;
> +
> + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
> + if (ret)
> + return ret;

Somewhat unusual in PCIe controller drivers. Is there something
unusual about the Visconti hardware?

Also looks a little suspicious since the sequence is:

visconti_pcie_probe
dma_set_mask_and_coherent(DMA_BIT_MASK(36))
visconti_add_pcie_port
dw_pcie_host_init
if (pci_msi_enabled())
dma_set_mask(DMA_BIT_MASK(32))

so dw_pcie_host_init() will override part of what we're setting here.

> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pci = &pcie->pci;
> + pp = &pci->pp;
> + pp->num_vectors = MAX_MSI_IRQS;

Is this necessary? I can't tell that this driver even implements MSI
support. It looks like tegra194 is the only other driver that sets
num_vectors itself.

> + pci->dev = dev;
> + pci->ops = &dw_pcie_ops;
> +
> + ret = visconti_get_resources(pdev, pcie);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, pcie);
> +
> + return visconti_add_pcie_port(pcie, pdev);
> +}
> +
> +static const struct of_device_id visconti_pcie_match[] = {
> + { .compatible = "toshiba,visconti-pcie" },
> + {},
> +};
> +
> +static struct platform_driver visconti_pcie_driver = {
> + .probe = visconti_pcie_probe,
> + .driver = {
> + .name = "visconti-pcie",
> + .of_match_table = visconti_pcie_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +
> +builtin_platform_driver(visconti_pcie_driver);
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2021-05-24 20:59    [W:0.107 / U:1.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site