lkml.org 
[lkml]   [2021]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] comedi: Make ni_mio_common a standalone module
From
Date
On 22/05/2021 12:53, Uwe Kleine-König wrote:
> This allows to get rid of the ugly
>
> #include "ni_mio_common.c"
>
> in three modules.
>
> For an amd64 allmodconfig this changed the size for the following object
> files:
> | before | after
> drivers/comedi/drivers/ni_atmio.o | 323944 | 20832
> drivers/comedi/drivers/ni_mio_cs.o | 318376 | 15000
> drivers/comedi/drivers/ni_mio_common.o | - | 325048
> drivers/comedi/drivers/ni_pcimio.o | 389344 | 48216
> ---------------------------------------+---------+-------
> sum | 1031664 | 409096
>
> So this results in a considerable decrease in binary size of more than
> 600 KiB.
>
> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
> ---
> Hello,
>
> changes compared to (implicit) v1 can be seen below. I now make use of a
> module name space COMEDI_NI as suggested by Greg and moved the
> declaration for range_ni_E_ao_ext to a more sensible place. The numbers
> got a tad worse because of the module name space, but the order is still
> the same.
>
> Best regards
> Uwe
>
> Range-diff against v1:
> 1: 79b9c40b8aa1 ! 1: 37d109ed616a comedi: Make ni_mio_common a standalone module
> @@ Commit message
> For an amd64 allmodconfig this changed the size for the following object
> files:
> | before | after
> - drivers/comedi/drivers/ni_atmio.o | 323944 | 20752
> - drivers/comedi/drivers/ni_mio_cs.o | 318376 | 14920
> - drivers/comedi/drivers/ni_mio_common.o | - | 324872
> - drivers/comedi/drivers/ni_pcimio.o | 389344 | 48168
> + drivers/comedi/drivers/ni_atmio.o | 323944 | 20832
> + drivers/comedi/drivers/ni_mio_cs.o | 318376 | 15000
> + drivers/comedi/drivers/ni_mio_common.o | - | 325048
> + drivers/comedi/drivers/ni_pcimio.o | 389344 | 48216
> ---------------------------------------+---------+-------
> - sum | 1031664 | 408712
> + sum | 1031664 | 409096
>
> So this results in a considerable decrease in binary size of more than
> 600 KiB.
> @@ drivers/comedi/drivers/ni_mio.h (new)
> +extern int ni_E_init(struct comedi_device *dev,
> + unsigned int interrupt_pin, unsigned int irq_polarity);
> +extern void mio_common_detach(struct comedi_device *dev);
> ++
> ++extern const struct comedi_lrange range_ni_E_ao_ext;
> ++
> ++MODULE_IMPORT_NS(COMEDI_NI);
>
> ## drivers/comedi/drivers/ni_mio_common.c ##
> @@
> + * fully tested as yet. Terry Barnaby, BEAM Ltd.
> */
>
> ++#define DEFAULT_SYMBOL_NAMESPACE COMEDI_NI
> ++
> #include <linux/interrupt.h>
> +#include <linux/module.h>
> #include <linux/sched.h>
> @@ drivers/comedi/drivers/ni_stc.h: struct ni_private {
> };
>
> -static const struct comedi_lrange range_ni_E_ao_ext;
> -+extern const struct comedi_lrange range_ni_E_ao_ext;
> -
> +-
> #endif /* _COMEDI_NI_STC_H */
>
> drivers/comedi/Kconfig | 6 +++
> drivers/comedi/drivers/Makefile | 1 +
> drivers/comedi/drivers/ni_atmio.c | 6 +--
> drivers/comedi/drivers/ni_mio.h | 37 +++++++++++++++
> drivers/comedi/drivers/ni_mio_common.c | 65 +++++++++++++-------------
> drivers/comedi/drivers/ni_mio_cs.c | 6 +--
> drivers/comedi/drivers/ni_pcimio.c | 3 +-
> drivers/comedi/drivers/ni_stc.h | 2 -
> 8 files changed, 81 insertions(+), 45 deletions(-)
> create mode 100644 drivers/comedi/drivers/ni_mio.h
>
> diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
> index 3cb61fa2c5c3..8137b94001ea 100644
> --- a/drivers/comedi/Kconfig
> +++ b/drivers/comedi/Kconfig
> @@ -473,9 +473,13 @@ config COMEDI_NI_AT_AO
> To compile this driver as a module, choose M here: the module will be
> called ni_at_ao.
>
> +config COMEDI_NI_MIO
> + tristate
> +
> config COMEDI_NI_ATMIO
> tristate "NI AT-MIO E series ISA-PNP card support"
> select COMEDI_8255
> + select COMEDI_NI_MIO
> select COMEDI_NI_TIO
> help
> Enable support for National Instruments AT-MIO E series cards
> @@ -1053,6 +1057,7 @@ config COMEDI_NI_PCIDIO
> config COMEDI_NI_PCIMIO
> tristate "NI PCI-MIO-E series and M series support"
> depends on HAS_DMA
> + select COMEDI_NI_MIO
> select COMEDI_NI_TIOCMD
> select COMEDI_8255
> help
> @@ -1160,6 +1165,7 @@ config COMEDI_NI_LABPC_CS
>
> config COMEDI_NI_MIO_CS
> tristate "NI DAQCard E series PCMCIA support"
> + select COMEDI_NI_MIO
> select COMEDI_NI_TIO
> select COMEDI_8255
> help
> diff --git a/drivers/comedi/drivers/Makefile b/drivers/comedi/drivers/Makefile
> index b24ac00cab73..725ad62f4c99 100644
> --- a/drivers/comedi/drivers/Makefile
> +++ b/drivers/comedi/drivers/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_COMEDI_MPC624) += mpc624.o
> obj-$(CONFIG_COMEDI_ADQ12B) += adq12b.o
> obj-$(CONFIG_COMEDI_NI_AT_A2150) += ni_at_a2150.o
> obj-$(CONFIG_COMEDI_NI_AT_AO) += ni_at_ao.o
> +obj-$(CONFIG_COMEDI_NI_MIO) += ni_mio_common.o
> obj-$(CONFIG_COMEDI_NI_ATMIO) += ni_atmio.o
> obj-$(CONFIG_COMEDI_NI_ATMIO16D) += ni_atmio16d.o
> obj-$(CONFIG_COMEDI_NI_LABPC_ISA) += ni_labpc.o
> diff --git a/drivers/comedi/drivers/ni_atmio.c b/drivers/comedi/drivers/ni_atmio.c
> index 56c78da475e7..d2c211788109 100644
> --- a/drivers/comedi/drivers/ni_atmio.c
> +++ b/drivers/comedi/drivers/ni_atmio.c
> @@ -44,8 +44,7 @@
> */
>
> /*
> - * The real guts of the driver is in ni_mio_common.c, which is included
> - * both here and in ni_pcimio.c
> + * The real guts of the driver is in ni_mio_common.c.
> *
> * Interrupt support added by Truxton Fulton <trux@truxton.com>
> *
> @@ -78,6 +77,7 @@
> #include <linux/isapnp.h>
>
> #include "ni_stc.h"
> +#include "ni_mio.h"
> #include "8255.h"
>
> /* AT specific setup */
> @@ -205,8 +205,6 @@ static const int ni_irqpin[] = {
> -1, -1, -1, 0, 1, 2, -1, 3, -1, -1, 4, 5, 6, -1, -1, 7
> };
>
> -#include "ni_mio_common.c"
> -
> static const struct pnp_device_id device_ids[] = {
> {.id = "NIC1900", .driver_data = 0},
> {.id = "NIC2400", .driver_data = 0},
> diff --git a/drivers/comedi/drivers/ni_mio.h b/drivers/comedi/drivers/ni_mio.h
> new file mode 100644
> index 000000000000..c9f20ade9dcc
> --- /dev/null
> +++ b/drivers/comedi/drivers/ni_mio.h
> @@ -0,0 +1,37 @@
> +#include <linux/interrupt.h>
> +
> +#define NI_GPCT_SUBDEV(x) (NI_GPCT0_SUBDEV + (x))
> +
> +enum ni_common_subdevices {
> + NI_AI_SUBDEV,
> + NI_AO_SUBDEV,
> + NI_DIO_SUBDEV,
> + NI_8255_DIO_SUBDEV,
> + NI_UNUSED_SUBDEV,
> + NI_CALIBRATION_SUBDEV,
> + NI_EEPROM_SUBDEV,
> + NI_PFI_DIO_SUBDEV,
> + NI_CS5529_CALIBRATION_SUBDEV,
> + NI_SERIAL_SUBDEV,
> + NI_RTSI_SUBDEV,
> + NI_GPCT0_SUBDEV,
> + NI_GPCT1_SUBDEV,
> + NI_FREQ_OUT_SUBDEV,
> + NI_NUM_SUBDEVICES
> +};
> +
> +extern void ni_writel(struct comedi_device *dev, unsigned int data, int reg);
> +extern void ni_writew(struct comedi_device *dev, unsigned int data, int reg);
> +extern void ni_writeb(struct comedi_device *dev, unsigned int data, int reg);
> +extern unsigned int ni_readb(struct comedi_device *dev, int reg);
> +extern void ni_stc_writew(struct comedi_device *dev, unsigned int data, int reg);
> +extern int ni_read_eeprom(struct comedi_device *dev, int addr);
> +extern irqreturn_t ni_E_interrupt(int irq, void *d);
> +extern int ni_alloc_private(struct comedi_device *dev);
> +extern int ni_E_init(struct comedi_device *dev,
> + unsigned int interrupt_pin, unsigned int irq_polarity);
> +extern void mio_common_detach(struct comedi_device *dev);
> +
> +extern const struct comedi_lrange range_ni_E_ao_ext;
> +
> +MODULE_IMPORT_NS(COMEDI_NI);
> diff --git a/drivers/comedi/drivers/ni_mio_common.c b/drivers/comedi/drivers/ni_mio_common.c
> index 4f80a4991f95..af480d03296c 100644
> --- a/drivers/comedi/drivers/ni_mio_common.c
> +++ b/drivers/comedi/drivers/ni_mio_common.c
> @@ -40,12 +40,19 @@
> * fully tested as yet. Terry Barnaby, BEAM Ltd.
> */
>
> +#define DEFAULT_SYMBOL_NAMESPACE COMEDI_NI
> +
> #include <linux/interrupt.h>
> +#include <linux/module.h>
> #include <linux/sched.h>
> #include <linux/delay.h>
> #include "8255.h"
> #include "mite.h"
>
> +#include "ni_stc.h"
> +#include "ni_mio.h"
> +#include "../comedidev.h"
> +
> /* A timeout count */
> #define NI_TIMEOUT 1000
>
> @@ -160,7 +167,7 @@ static const struct comedi_lrange range_ni_M_ai_628x = {
> }
> };
>
> -static const struct comedi_lrange range_ni_E_ao_ext = {
> +const struct comedi_lrange range_ni_E_ao_ext = {
> 4, {
> BIP_RANGE(10),
> UNI_RANGE(10),
> @@ -168,6 +175,7 @@ static const struct comedi_lrange range_ni_E_ao_ext = {
> RANGE_ext(0, 1)
> }
> };
> +EXPORT_SYMBOL_GPL(range_ni_E_ao_ext);
>
> static const struct comedi_lrange *const ni_range_lkup[] = {
> [ai_gain_16] = &range_ni_E_ai,
> @@ -187,26 +195,6 @@ enum aimodes {
> AIMODE_SAMPLE = 3,
> };
>
> -enum ni_common_subdevices {
> - NI_AI_SUBDEV,
> - NI_AO_SUBDEV,
> - NI_DIO_SUBDEV,
> - NI_8255_DIO_SUBDEV,
> - NI_UNUSED_SUBDEV,
> - NI_CALIBRATION_SUBDEV,
> - NI_EEPROM_SUBDEV,
> - NI_PFI_DIO_SUBDEV,
> - NI_CS5529_CALIBRATION_SUBDEV,
> - NI_SERIAL_SUBDEV,
> - NI_RTSI_SUBDEV,
> - NI_GPCT0_SUBDEV,
> - NI_GPCT1_SUBDEV,
> - NI_FREQ_OUT_SUBDEV,
> - NI_NUM_SUBDEVICES
> -};
> -
> -#define NI_GPCT_SUBDEV(x) (NI_GPCT0_SUBDEV + (x))
> -
> enum timebase_nanoseconds {
> TIMEBASE_1_NS = 50,
> TIMEBASE_2_NS = 10000
> @@ -219,29 +207,32 @@ enum timebase_nanoseconds {
>
> static const int num_adc_stages_611x = 3;
>
> -static void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
> +void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
> {
> if (dev->mmio)
> writel(data, dev->mmio + reg);
> else
> outl(data, dev->iobase + reg);
> }
> +EXPORT_SYMBOL_GPL(ni_writel);
>
> -static void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
> +void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
> {
> if (dev->mmio)
> writew(data, dev->mmio + reg);
> else
> outw(data, dev->iobase + reg);
> }
> +EXPORT_SYMBOL_GPL(ni_writew);
>
> -static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
> +void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
> {
> if (dev->mmio)
> writeb(data, dev->mmio + reg);
> else
> outb(data, dev->iobase + reg);
> }
> +EXPORT_SYMBOL_GPL(ni_writeb);
>
> static unsigned int ni_readl(struct comedi_device *dev, int reg)
> {
> @@ -259,13 +250,14 @@ static unsigned int ni_readw(struct comedi_device *dev, int reg)
> return inw(dev->iobase + reg);
> }
>
> -static unsigned int ni_readb(struct comedi_device *dev, int reg)
> +unsigned int ni_readb(struct comedi_device *dev, int reg)
> {
> if (dev->mmio)
> return readb(dev->mmio + reg);
>
> return inb(dev->iobase + reg);
> }
> +EXPORT_SYMBOL_GPL(ni_readb);
>
> /*
> * We automatically take advantage of STC registers that can be
> @@ -435,8 +427,7 @@ static unsigned int m_series_stc_read(struct comedi_device *dev,
> }
> }
>
> -static void ni_stc_writew(struct comedi_device *dev,
> - unsigned int data, int reg)
> +void ni_stc_writew(struct comedi_device *dev, unsigned int data, int reg)
> {
> struct ni_private *devpriv = dev->private;
> unsigned long flags;
> @@ -454,6 +445,7 @@ static void ni_stc_writew(struct comedi_device *dev,
> spin_unlock_irqrestore(&devpriv->window_lock, flags);
> }
> }
> +EXPORT_SYMBOL_GPL(ni_stc_writew);
>
> static void ni_stc_writel(struct comedi_device *dev,
> unsigned int data, int reg)
> @@ -4482,7 +4474,7 @@ static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s)
> }
> }
>
> -static int ni_read_eeprom(struct comedi_device *dev, int addr)
> +int ni_read_eeprom(struct comedi_device *dev, int addr)
> {
> unsigned int cmd = NI_E_SERIAL_CMD_EEPROM_CS;
> int bit;
> @@ -4511,6 +4503,7 @@ static int ni_read_eeprom(struct comedi_device *dev, int addr)
>
> return bitstring;
> }
> +EXPORT_SYMBOL_GPL(ni_read_eeprom);
>
> static int ni_eeprom_insn_read(struct comedi_device *dev,
> struct comedi_subdevice *s,
> @@ -5885,7 +5878,7 @@ static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
> }
> #endif
>
> -static irqreturn_t ni_E_interrupt(int irq, void *d)
> +irqreturn_t ni_E_interrupt(int irq, void *d)
> {
> struct comedi_device *dev = d;
> struct comedi_subdevice *s_ai = dev->read_subdev;
> @@ -5941,8 +5934,9 @@ static irqreturn_t ni_E_interrupt(int irq, void *d)
> spin_unlock_irqrestore(&dev->spinlock, flags);
> return IRQ_HANDLED;
> }
> +EXPORT_SYMBOL_GPL(ni_E_interrupt);
>
> -static int ni_alloc_private(struct comedi_device *dev)
> +int ni_alloc_private(struct comedi_device *dev)
> {
> struct ni_private *devpriv;
>
> @@ -5956,6 +5950,7 @@ static int ni_alloc_private(struct comedi_device *dev)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(ni_alloc_private);
>
> static unsigned int _ni_get_valid_routes(struct comedi_device *dev,
> unsigned int n_pairs,
> @@ -5967,8 +5962,8 @@ static unsigned int _ni_get_valid_routes(struct comedi_device *dev,
> pair_data);
> }
>
> -static int ni_E_init(struct comedi_device *dev,
> - unsigned int interrupt_pin, unsigned int irq_polarity)
> +int ni_E_init(struct comedi_device *dev,
> + unsigned int interrupt_pin, unsigned int irq_polarity)
> {
> const struct ni_board_struct *board = dev->board_ptr;
> struct ni_private *devpriv = dev->private;
> @@ -6331,11 +6326,15 @@ static int ni_E_init(struct comedi_device *dev,
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(ni_E_init);
>
> -static void mio_common_detach(struct comedi_device *dev)
> +void mio_common_detach(struct comedi_device *dev)
> {
> struct ni_private *devpriv = dev->private;
>
> if (devpriv)
> ni_gpct_device_destroy(devpriv->counter_dev);
> }
> +EXPORT_SYMBOL_GPL(mio_common_detach);
> +
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/comedi/drivers/ni_mio_cs.c b/drivers/comedi/drivers/ni_mio_cs.c
> index 4f37b4e58f09..9f11efde28f9 100644
> --- a/drivers/comedi/drivers/ni_mio_cs.c
> +++ b/drivers/comedi/drivers/ni_mio_cs.c
> @@ -19,8 +19,7 @@
> */
>
> /*
> - * The real guts of the driver is in ni_mio_common.c, which is
> - * included by all the E series drivers.
> + * The real guts of the driver is in ni_mio_common.c
> *
> * References for specifications:
> * 341080a.pdf DAQCard E Series Register Level Programmer Manual
> @@ -31,6 +30,7 @@
>
> #include "../comedi_pcmcia.h"
> #include "ni_stc.h"
> +#include "ni_mio.h"
> #include "8255.h"
>
> /*
> @@ -112,8 +112,6 @@ static const struct ni_board_struct ni_boards[] = {
> #endif
> };
>
> -#include "ni_mio_common.c"
> -
> static const void *ni_getboardtype(struct comedi_device *dev,
> struct pcmcia_device *link)
> {
> diff --git a/drivers/comedi/drivers/ni_pcimio.c b/drivers/comedi/drivers/ni_pcimio.c
> index 6c813a490ba5..f74114e883be 100644
> --- a/drivers/comedi/drivers/ni_pcimio.c
> +++ b/drivers/comedi/drivers/ni_pcimio.c
> @@ -100,6 +100,7 @@
> #include <asm/byteorder.h>
>
> #include "ni_stc.h"
> +#include "ni_mio.h"
> #include "mite.h"
>
> #define PCIDMA
> @@ -1142,8 +1143,6 @@ static const struct ni_board_struct ni_boards[] = {
> },
> };
>
> -#include "ni_mio_common.c"
> -
> static int pcimio_ai_change(struct comedi_device *dev,
> struct comedi_subdevice *s)
> {
> diff --git a/drivers/comedi/drivers/ni_stc.h b/drivers/comedi/drivers/ni_stc.h
> index fbc0b753a0f5..7837e4683c6d 100644
> --- a/drivers/comedi/drivers/ni_stc.h
> +++ b/drivers/comedi/drivers/ni_stc.h
> @@ -1137,6 +1137,4 @@ struct ni_private {
> u8 rgout0_usage;
> };
>
> -static const struct comedi_lrange range_ni_E_ao_ext;
> -
> #endif /* _COMEDI_NI_STC_H */
>
> base-commit: 6efb943b8616ec53a5e444193dccf1af9ad627b5
>

NAK.

It's not as simple as that. "ni_mio_common.c" contains condional code
that depends on whether the PCIDMA macro is defined or not before it is
included. "ni_pcimio.c" defines the PCIDMA macro but "ni_atmio.c" and
"ni_mio_cs.c" do not.

The "ni_pcimio" module depends on the "mite" and "ni_tiocmd" modules and
most of the code that depends on those is in the PCIDMA parts of
"ni_mio_common.c".

The "ni_atmio" and "ni_mio_cs" modules do not depend on the "mite" and
"ni_tiocmd" modules, and should not compile any of the PCMDMA parts of
"ni_mio_common.c" that depends on it.

So you see, there are really two versions of the "ni_mio_common.c" code
currently, but this "ni_mio_common" module you have added only has one
version of the code, and that version of the code is broken for "ni_pcimio".

--
-=( Ian Abbott <abbotti@mev.co.uk> || MEV Ltd. is a company )=-
-=( registered in England & Wales. Regd. number: 02862268. )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-

\
 
 \ /
  Last update: 2021-05-22 20:02    [W:0.055 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site