lkml.org 
[lkml]   [2021]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v6 2/2] pwm: Add Aspeed ast2600 PWM support
Hello,

On Tue, May 18, 2021 at 08:55:17AM +0800, Billy Tsai wrote:
> This patch add the support of PWM controller which can be found at aspeed
> ast2600 soc. The pwm supoorts up to 16 channels and it's part function
> of multi-function device "pwm-tach controller".
>
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> ---
> drivers/pwm/Kconfig | 9 +
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-aspeed-g6.c | 351 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 361 insertions(+)
> create mode 100644 drivers/pwm/pwm-aspeed-g6.c
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 63be5362fd3a..3b2d4cf024a6 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -51,6 +51,15 @@ config PWM_AB8500
> To compile this driver as a module, choose M here: the module
> will be called pwm-ab8500.
>
> +config PWM_ASPEED_G6
> + tristate "ASPEEDG6 PWM support"
> + depends on ARCH_ASPEED || COMPILE_TEST
> + help
> + Generic PWM framework driver for ASPEED G6 SoC.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called pwm-aspeed-g6.
> +
> config PWM_ATMEL
> tristate "Atmel PWM support"
> depends on OF
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index cbdcd55d69ee..29d22d806e68 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -2,6 +2,7 @@
> obj-$(CONFIG_PWM) += core.o
> obj-$(CONFIG_PWM_SYSFS) += sysfs.o
> obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
> +obj-$(CONFIG_PWM_ASPEED_G6) += pwm-aspeed-g6.o
> obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
> obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
> obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
> diff --git a/drivers/pwm/pwm-aspeed-g6.c b/drivers/pwm/pwm-aspeed-g6.c
> new file mode 100644
> index 000000000000..a80211eb4877
> --- /dev/null
> +++ b/drivers/pwm/pwm-aspeed-g6.c
> @@ -0,0 +1,351 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2021 ASPEED Technology Inc.
> + *
> + * PWM controller driver for Aspeed ast26xx SoCs.
> + * This drivers doesn't support earlier version of the IP.
> + *
> + * The formula of pwm frequency:
> + * PWM frequency = CLK Source / ((DIV_L + 1) * BIT(DIV_H) * (PERIOD + 1))
> + *
> + * The software driver fixes the period to 255, which causes the high-frequency
> + * precision of the PWM to be coarse, in exchange for the fineness of the duty cycle.
> + *
> + * Register usage:
> + * PIN_ENABLE: When it is unset the pwm controller will always output low to the extern.
> + * Use to determine whether the PWM channel is enabled or disabled
> + * CLK_ENABLE: When it is unset the pwm controller will reset the duty counter to 0 and
> + * output low to the PIN_ENABLE mux after that the driver can still change the pwm period
> + * and duty and the value will apply when CLK_ENABLE be set again.
> + * Use to determin whether duty_cycle bigger than 0.
> + * PWM_ASPEED_CTRL_INVERSE: When it is toggled the output value will inverse immediately.
> + * PWM_ASPEED_DUTY_CYCLE_FALLING_POINT/PWM_ASPEED_DUTY_CYCLE_RISING_POINT: When these two
> + * values are equal it means the duty cycle = 100%.
> + *
> + * Limitations:
> + * - When changing both duty cycle and period, we cannot prevent in
> + * software that the output might produce a period with mixed
> + * settings.
> + *
> + * Improvements:
> + * - When changing the duty cycle or period, our pwm controller will not
> + * generate the glitch, the configure will change at next cycle of pwm.
> + * This improvement can disable/enable through PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/errno.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/sysfs.h>
> +#include <linux/reset.h>
> +#include <linux/regmap.h>
> +#include <linux/bitfield.h>
> +#include <linux/slab.h>
> +#include <linux/pwm.h>
> +#include <linux/math64.h>
> +
> +/* The channel number of Aspeed pwm controller */
> +#define PWM_ASPEED_NR_PWMS 16
> +
> +/* PWM Control Register */
> +#define PWM_ASPEED_CTRL_CH(ch) (((ch)*0x10) + 0x00)
> +#define PWM_ASPEED_CTRL_LOAD_SEL_RISING_AS_WDT BIT(19)
> +#define PWM_ASPEED_CTRL_DUTY_LOAD_AS_WDT_ENABLE BIT(18)
> +#define PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE BIT(17)
> +#define PWM_ASPEED_CTRL_CLK_ENABLE BIT(16)
> +#define PWM_ASPEED_CTRL_LEVEL_OUTPUT BIT(15)
> +#define PWM_ASPEED_CTRL_INVERSE BIT(14)
> +#define PWM_ASPEED_CTRL_OPEN_DRAIN_ENABLE BIT(13)
> +#define PWM_ASPEED_CTRL_PIN_ENABLE BIT(12)
> +#define PWM_ASPEED_CTRL_CLK_DIV_H GENMASK(11, 8)
> +#define PWM_ASPEED_CTRL_CLK_DIV_L GENMASK(7, 0)
> +
> +/* PWM Duty Cycle Register */
> +#define PWM_ASPEED_DUTY_CYCLE_CH(ch) (((ch)*0x10) + 0x04)
> +#define PWM_ASPEED_DUTY_CYCLE_PERIOD GENMASK(31, 24)
> +#define PWM_ASPEED_DUTY_CYCLE_POINT_AS_WDT GENMASK(23, 16)
> +#define PWM_ASPEED_DUTY_CYCLE_FALLING_POINT GENMASK(15, 8)
> +#define PWM_ASPEED_DUTY_CYCLE_RISING_POINT GENMASK(7, 0)
> +
> +/* PWM fixed value */
> +#define PWM_ASPEED_FIXED_PERIOD FIELD_MAX(PWM_ASPEED_DUTY_CYCLE_PERIOD)
> +
> +struct aspeed_pwm_data {
> + struct pwm_chip chip;
> + struct clk *clk;
> + struct regmap *regmap;
> + struct reset_control *reset;
> +};
> +
> +static inline struct aspeed_pwm_data *
> +aspeed_pwm_chip_to_data(struct pwm_chip *c)
> +{
> + return container_of(c, struct aspeed_pwm_data, chip);
> +}
> +
> +static u64 aspeed_pwm_get_period(struct pwm_chip *chip, struct pwm_device *pwm)
> +{
> + struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
> + unsigned long rate;
> + u32 index = pwm->hwpwm;
> + u32 val;
> + u64 period, div_h, div_l, clk_period;
> +
> + rate = clk_get_rate(priv->clk);
> + regmap_read(priv->regmap, PWM_ASPEED_CTRL_CH(index), &val);
> + div_h = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_H, val);
> + div_l = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_L, val);
> + regmap_read(priv->regmap, PWM_ASPEED_DUTY_CYCLE_CH(index), &val);
> + clk_period = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_PERIOD, val);
> + period = (NSEC_PER_SEC * BIT(div_h) * (div_l + 1) * (clk_period + 1));

The outer pair of parenthesis on the RHS isn't necessary. The maximal
value that period can have here is:

1000000000 * 2**15 * 256 * 256

This fits into an u64, but as all but the last factor are 32 bit values
you might get an overflow here.

> + period = DIV_ROUND_UP_ULL(period, rate);
> +
> + return period;
> +}
> +
> +static int aspeed_pwm_set_period(struct pwm_chip *chip, struct pwm_device *pwm,
> + const struct pwm_state *state)
> +{
> + struct device *dev = chip->dev;
> + struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
> + unsigned long rate;
> + u64 div_h, div_l, divisor;
> + u32 index = pwm->hwpwm;
> +
> + rate = clk_get_rate(priv->clk);
> + /*
> + * Pick the smallest value for div_h so that div_l can be the biggest
> + * which results in a finer resolution near the target period value.
> + */
> + divisor = (u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1) *
> + (FIELD_MAX(PWM_ASPEED_CTRL_CLK_DIV_L) + 1);
> + div_h = order_base_2(div64_u64(rate * state->period, divisor));
> + if (div_h > 0xf)
> + div_h = 0xf;
> +
> + divisor = ((u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1)) << div_h;
> + div_l = div64_u64(rate * state->period, divisor);
> +
> + if (div_l == 0)
> + return -ERANGE;
> +
> + div_l -= 1;
> +
> + if (div_l > 255)
> + div_l = 255;
> +
> + dev_dbg(dev, "clk source: %ld div_h %lld, div_l : %lld\n", rate, div_h,
> + div_l);
> +
> + regmap_update_bits(
> + priv->regmap, PWM_ASPEED_CTRL_CH(index),
> + (PWM_ASPEED_CTRL_CLK_DIV_H | PWM_ASPEED_CTRL_CLK_DIV_L),
> + FIELD_PREP(PWM_ASPEED_CTRL_CLK_DIV_H, div_h) |
> + FIELD_PREP(PWM_ASPEED_CTRL_CLK_DIV_L, div_l));
> + return 0;
> +}
> +
> +static void aspeed_pwm_set_duty(struct pwm_chip *chip, struct pwm_device *pwm,
> + const struct pwm_state *state)
> +{
> + struct device *dev = chip->dev;
> + struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
> + u32 duty_pt;
> + u32 index = pwm->hwpwm;
> + u64 cur_period;
> +
> + cur_period = aspeed_pwm_get_period(chip, pwm);
> + duty_pt = DIV_ROUND_DOWN_ULL(
> + state->duty_cycle * (PWM_ASPEED_FIXED_PERIOD + 1), cur_period);
> + dev_dbg(dev, "cur_period = %lld, duty_cycle = %lld, duty_pt = %d\n",
> + cur_period, state->duty_cycle, duty_pt);
> + if (duty_pt == 0) {
> + regmap_update_bits(priv->regmap, PWM_ASPEED_CTRL_CH(index),
> + PWM_ASPEED_CTRL_CLK_ENABLE, 0);
> + } else {
> + if (duty_pt >= (PWM_ASPEED_FIXED_PERIOD + 1))
> + duty_pt = 0;
> + regmap_update_bits(
> + priv->regmap, PWM_ASPEED_DUTY_CYCLE_CH(index),
> + PWM_ASPEED_DUTY_CYCLE_FALLING_POINT,
> + FIELD_PREP(PWM_ASPEED_DUTY_CYCLE_FALLING_POINT,
> + duty_pt));
> + regmap_update_bits(priv->regmap, PWM_ASPEED_CTRL_CH(index),
> + PWM_ASPEED_CTRL_CLK_ENABLE,
> + PWM_ASPEED_CTRL_CLK_ENABLE);
> + }
> +}
> +
> +static void aspeed_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> + struct pwm_state *state)
> +{
> + struct device *dev = chip->dev;
> + struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
> + u32 index = pwm->hwpwm;
> + bool polarity, ch_en, clk_en;
> + u32 duty_pt, val;
> +
> + regmap_read(priv->regmap, PWM_ASPEED_CTRL_CH(index), &val);
> + polarity = FIELD_GET(PWM_ASPEED_CTRL_INVERSE, val);
> + ch_en = FIELD_GET(PWM_ASPEED_CTRL_PIN_ENABLE, val);
> + clk_en = FIELD_GET(PWM_ASPEED_CTRL_CLK_ENABLE, val);
> + regmap_read(priv->regmap, PWM_ASPEED_DUTY_CYCLE_CH(index), &val);
> + duty_pt = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_FALLING_POINT, val);
> +
> + state->period = aspeed_pwm_get_period(chip, pwm);
> + if (clk_en && duty_pt)
> + state->duty_cycle = DIV_ROUND_UP_ULL(
> + state->period * duty_pt, PWM_ASPEED_FIXED_PERIOD + 1);
> + else
> + state->duty_cycle = clk_en ? state->period : 0;
> + state->polarity = polarity;
> + state->enabled = ch_en;
> + dev_dbg(dev, "get period: %lldns, duty_cycle: %lldns", state->period,
> + state->duty_cycle);
> +}
> +
> +static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> + const struct pwm_state *state)
> +{
> + struct device *dev = chip->dev;
> + struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
> + u32 index = pwm->hwpwm;
> + int ret;
> +
> + dev_dbg(dev, "apply period: %lldns, duty_cycle: %lldns", state->period,
> + state->duty_cycle);
> +
> + regmap_update_bits(priv->regmap, PWM_ASPEED_CTRL_CH(index),
> + PWM_ASPEED_CTRL_PIN_ENABLE,
> + state->enabled ? PWM_ASPEED_CTRL_PIN_ENABLE : 0);
> + /*
> + * Fixed the period to the max value and rising point to 0
> + * for high resolution and simplify frequency calculation.
> + */
> + regmap_update_bits(priv->regmap, PWM_ASPEED_DUTY_CYCLE_CH(index),
> + (PWM_ASPEED_DUTY_CYCLE_PERIOD |
> + PWM_ASPEED_DUTY_CYCLE_RISING_POINT),
> + FIELD_PREP(PWM_ASPEED_DUTY_CYCLE_PERIOD,
> + PWM_ASPEED_FIXED_PERIOD));
> +
> + ret = aspeed_pwm_set_period(chip, pwm, state);
> + if (ret)
> + return ret;
> + aspeed_pwm_set_duty(chip, pwm, state);

aspeed_pwm_set_duty calls aspeed_pwm_get_period() which is a bit
ineffective after just having set the period.

> + regmap_update_bits(priv->regmap, PWM_ASPEED_CTRL_CH(index),
> + PWM_ASPEED_CTRL_INVERSE,
> + FIELD_PREP(PWM_ASPEED_CTRL_INVERSE,
> + state->polarity));
> + return 0;
> +}

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-05-22 18:09    [W:0.091 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site