lkml.org 
[lkml]   [2021]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V5 0/4] soc: imx: add i.MX BLK-CTL support
On Fri, May 21, 2021 at 5:27 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan@nxp.com>
>
> V5:
> Rework the blk-ctl driver to let sub-PGC use blk-ctl as parent power
> domain to fix the potential handshake issue.
> I still keep R-b/A-b tag for Patch 1,2,4, since very minor changes
> I only drop R-b tag for Patch 3, since it has big change.
> An example, the pgc_mipi not take pgc_dispmix as parent:
>
> pgc_dispmix: power-domain@10 {
> #power-domain-cells = <0>;
> reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
> clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
> <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> };
>
> pgc_mipi: power-domain@11 {
> #power-domain-cells = <0>;
> reg = <IMX8MM_POWER_DOMAIN_MIPI>;
> power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;

With this change, I get a bunch of errors on boot. The list of
power-domains appear correct on the surface, but it also has trouble
waking from sleep.

[ 0.695947] imx8mm-blk-ctl imx-dispmix-blk-ctl.0: invalid resource
[ 0.702849] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.0 failed
with error -22
[ 0.711259] imx8mm-blk-ctl imx-dispmix-blk-ctl.1: invalid resource
[ 0.716451] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.1 failed
with error -22
[ 0.724856] imx8mm-blk-ctl imx-dispmix-blk-ctl.2: invalid resource
[ 0.730097] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.2 failed
with error -22
[ 0.738398] imx8mm-blk-ctl imx-dispmix-blk-ctl.3: invalid resource
[ 0.743747] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.3 failed
with error -22

If I have a wrong device tree configuration, can you please post an
updated device tree? I don't think an official patch for original
pgc's were pushed as part of either series. I used this e-mail as the
patch to enable the blk-ctl.

thanks,

adam

> };
>
> dispmix_blk_ctl: clock-controller@32e28000 {
> compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> reg = <0x32e28000 0x100>;
> #power-domain-cells = <1>;
> power-domains = <&pgc_dispmix>, <&pgc_mipi>;
> power-domain-names = "dispmix", "mipi";
> clocks = <&clk IMX8MM_CLK_DISP_ROOT>, <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> };
>
> V4:
> Add R-b tag
> Typo fix
> Update the power domain macro names Per Abel and Frieder
>
> V3:
> Add explaination for not listing items in patch 2 commit log Per Rob.
> Addressed comments from Lucas and Frieder on patch [3,4].
> A few comments from Jacky was ignored, because following gpcv2
> coding style.
>
> V2:
> Fix yaml check failure.
>
> Previously there is an effort from Abel that take BLK-CTL as clock
> provider, but it turns out that there is A/B lock issue and we are
> not able resolve that.
>
> Per discuss with Lucas and Jacky, we made an agreement that take BLK-CTL
> as a power domain provider and use GPC's domain as parent, the consumer
> node take BLK-CTL as power domain input.
>
> This patchset has been tested on i.MX8MM EVK board, but one hack
> is not included in the patchset is that the DISPMIX BLK-CTL
> MIPI_M/S_RESET not implemented. Per Lucas, we will finally have a MIPI
> DPHY driver, so fine to leave it.
>
> Thanks for Lucas's suggestion, Frieder Schrempf for collecting
> all the patches, Abel's previous BLK-CTL work, Jacky Bai on help
> debug issues.
>
>
> Peng Fan (4):
> dt-bindings: power: Add defines for i.MX8MM BLK-CTL power domains
> Documentation: bindings: clk: Add bindings for i.MX BLK_CTL
> soc: imx: Add generic blk-ctl driver
> soc: imx: Add blk-ctl driver for i.MX8MM
>
> .../bindings/soc/imx/fsl,imx-blk-ctl.yaml | 66 ++++
> drivers/soc/imx/Makefile | 2 +-
> drivers/soc/imx/blk-ctl-imx8mm.c | 139 ++++++++
> drivers/soc/imx/blk-ctl.c | 311 ++++++++++++++++++
> drivers/soc/imx/blk-ctl.h | 85 +++++
> include/dt-bindings/power/imx8mm-power.h | 13 +
> 6 files changed, 615 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx-blk-ctl.yaml
> create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c
> create mode 100644 drivers/soc/imx/blk-ctl.c
> create mode 100644 drivers/soc/imx/blk-ctl.h
>
> --
> 2.30.0
>

\
 
 \ /
  Last update: 2021-05-21 17:38    [W:0.062 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site