lkml.org 
[lkml]   [2021]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/6] bus: mhi: core: Set BHI/BHIe offsets on power up preparation
On Thu, May 06, 2021 at 12:51:40PM -0700, Bhaumik Bhatt wrote:
> Set the BHI and/or BHIe offsets in mhi_prepare_for_power_up(),
> rearrange the function, and remove the equivalent from
> mhi_async_power_up(). This helps consolidate multiple checks
> in different parts of the driver and can help MHI fail early on
> before power up begins if the offsets are not read correctly.
>
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
> drivers/bus/mhi/core/init.c | 42 +++++++++++++++++++++++-------------------
> drivers/bus/mhi/core/pm.c | 28 ++++------------------------
> 2 files changed, 27 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> index c81b377..11c7a3d 100644
> --- a/drivers/bus/mhi/core/init.c
> +++ b/drivers/bus/mhi/core/init.c
> @@ -1063,7 +1063,7 @@ EXPORT_SYMBOL_GPL(mhi_free_controller);
> int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
> {
> struct device *dev = &mhi_cntrl->mhi_dev->dev;
> - u32 bhie_off;
> + u32 bhi_off, bhie_off;
> int ret;
>
> mutex_lock(&mhi_cntrl->pm_mutex);
> @@ -1072,29 +1072,36 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
> if (ret)
> goto error_dev_ctxt;
>
> - /*
> - * Allocate RDDM table if specified, this table is for debugging purpose
> - */
> - if (mhi_cntrl->rddm_size) {
> - mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
> - mhi_cntrl->rddm_size);
> + ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &bhi_off);
> + if (ret) {
> + dev_err(dev, "Error getting BHI offset\n");
> + goto error_reg_offset;
> + }
> + mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off;
>
> - /*
> - * This controller supports RDDM, so we need to manually clear
> - * BHIE RX registers since POR values are undefined.
> - */
> + if (mhi_cntrl->fbc_download || mhi_cntrl->rddm_size) {
> ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF,
> &bhie_off);
> if (ret) {
> dev_err(dev, "Error getting BHIE offset\n");
> - goto bhie_error;
> + goto error_reg_offset;
> }
> -
> mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
> + }
> +
> + if (mhi_cntrl->rddm_size) {
> + /*
> + * This controller supports RDDM, so we need to manually clear
> + * BHIE RX registers since POR values are undefined.
> + */
> memset_io(mhi_cntrl->bhie + BHIE_RXVECADDR_LOW_OFFS,
> 0, BHIE_RXVECSTATUS_OFFS - BHIE_RXVECADDR_LOW_OFFS +
> 4);
> -
> + /*
> + * Allocate RDDM table for debugging purpose if specified
> + */
> + mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
> + mhi_cntrl->rddm_size);
> if (mhi_cntrl->rddm_image)
> mhi_rddm_prepare(mhi_cntrl, mhi_cntrl->rddm_image);
> }
> @@ -1103,11 +1110,8 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
>
> return 0;
>
> -bhie_error:
> - if (mhi_cntrl->rddm_image) {
> - mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->rddm_image);
> - mhi_cntrl->rddm_image = NULL;
> - }
> +error_reg_offset:
> + mhi_deinit_dev_ctxt(mhi_cntrl);
>
> error_dev_ctxt:
> mutex_unlock(&mhi_cntrl->pm_mutex);
> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
> index e2e59a3..adf426c 100644
> --- a/drivers/bus/mhi/core/pm.c
> +++ b/drivers/bus/mhi/core/pm.c
> @@ -1066,28 +1066,8 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
> if (ret)
> goto error_setup_irq;
>
> - /* Setup BHI offset & INTVEC */
> + /* Setup BHI INTVEC */
> write_lock_irq(&mhi_cntrl->pm_lock);
> - ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &val);
> - if (ret) {
> - write_unlock_irq(&mhi_cntrl->pm_lock);
> - goto error_bhi_offset;
> - }
> -
> - mhi_cntrl->bhi = mhi_cntrl->regs + val;
> -
> - /* Setup BHIE offset */
> - if (mhi_cntrl->fbc_download) {
> - ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF, &val);
> - if (ret) {
> - write_unlock_irq(&mhi_cntrl->pm_lock);
> - dev_err(dev, "Error reading BHIE offset\n");
> - goto error_bhi_offset;
> - }
> -
> - mhi_cntrl->bhie = mhi_cntrl->regs + val;
> - }
> -
> mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
> mhi_cntrl->pm_state = MHI_PM_POR;
> mhi_cntrl->ee = MHI_EE_MAX;
> @@ -1098,7 +1078,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
> if (!MHI_IN_PBL(current_ee) && current_ee != MHI_EE_AMSS) {
> dev_err(dev, "Not a valid EE for power on\n");
> ret = -EIO;
> - goto error_bhi_offset;
> + goto error_async_power_up;
> }
>
> state = mhi_get_mhi_state(mhi_cntrl);
> @@ -1117,7 +1097,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
> if (!ret) {
> ret = -EIO;
> dev_info(dev, "Failed to reset MHI due to syserr state\n");
> - goto error_bhi_offset;
> + goto error_async_power_up;
> }
>
> /*
> @@ -1139,7 +1119,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>
> return 0;
>
> -error_bhi_offset:
> +error_async_power_up:
> mhi_deinit_free_irq(mhi_cntrl);
>
> error_setup_irq:
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2021-05-21 15:36    [W:0.516 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site