lkml.org 
[lkml]   [2021]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH V4 3/8] arm64: dts: qcom: pm7325: Add pm7325 base dts file
On 2021-05-20 12:50, Vinod Koul wrote:
> On 20-05-21, 12:02, skakit@codeaurora.org wrote:
>> On 2021-05-18 22:12, Matthias Kaehlcke wrote:
>> > On Tue, May 18, 2021 at 05:16:27PM +0530, Vinod Koul wrote:
>> > > On 18-05-21, 11:50, satya priya wrote:
>> > > > Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes.
>> > > >
>> > > > Signed-off-by: satya priya <skakit@codeaurora.org>
>> > > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
>> > > > ---
>> > > > Changes in RESEND V4:
>> > > > - No Changes.
>> > > >
>> > > > arch/arm64/boot/dts/qcom/pm7325.dtsi | 53 ++++++++++++++++++++++++++++++++++++
>> > > > 1 file changed, 53 insertions(+)
>> > > > create mode 100644 arch/arm64/boot/dts/qcom/pm7325.dtsi
>> > > >
>> > > > diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
>> > > > new file mode 100644
>> > > > index 0000000..e7f64a9
>> > > > --- /dev/null
>> > > > +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
>> > > > @@ -0,0 +1,53 @@
>> > > > +// SPDX-License-Identifier: BSD-3-Clause
>> > > > +// Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> > > > +
>> > > > +#include <dt-bindings/interrupt-controller/irq.h>
>> > > > +#include <dt-bindings/spmi/spmi.h>
>> > > > +
>> > > > +&spmi_bus {
>> > > > + pm7325: pmic@1 {
>> > > > + compatible = "qcom,pm7325", "qcom,spmi-pmic";
>> > >
>> > > where is qcom,pm7325 documented?
>>
>> >
>> > good point, I missed that one.
>> >
>>
>> Actually this point was discussed during V2(
>> https://lore.kernel.org/patchwork/patch/1406186/#1607321 ).
>> As far as I understand it is not mandatory to add "qcom,pm7325" as we
>> are
>> adding "qcom,spmi-pmic". It is just a good to have change.
>> I could not find the documentation for pm8350c, pmk8350 and pmr735a as
>> well.
>
> Yes that is a miss too, IMO all of these should be added to
> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt or the yaml
> file replacing this
>

Okay, will add those four pmics to qcom,spmi-pmic.txt.

> Thanks

\
 
 \ /
  Last update: 2021-05-21 14:24    [W:0.043 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site