Messages in this thread | | | Subject | Re: [PATCH v4] net: phy: add driver for Motorcomm yt8511 phy | From | patchwork-bot+netdevbpf@kernel ... | Date | Fri, 21 May 2021 20:30:10 +0000 |
| |
Hello:
This patch was applied to netdev/net-next.git (refs/heads/master):
On Thu, 20 May 2021 12:32:30 -0400 you wrote: > Add a driver for the Motorcomm yt8511 phy that will be used in the > production Pine64 rk3566-quartz64 development board. > It supports gigabit transfer speeds, rgmii, and 125mhz clk output. > > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > --- > Changes v4: > - Set fast ethernet delays as well > - Use __phy_modify for delay setting > - Enable PLL in sleep instead of disabling sleep > - Don't set genphy functions that are defaults > - Tested downshift and duplex detection > > [...]
Here is the summary with links: - [v4] net: phy: add driver for Motorcomm yt8511 phy https://git.kernel.org/netdev/net-next/c/48e8c6f1612b
You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
| |