lkml.org 
[lkml]   [2021]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 0/2] am335x: set pinmux registers from pins debug file
On Wed, May 19, 2021 at 3:58 AM Dario Binacchi <dariobin@libero.it> wrote:
>
>
> The patch was born from the need to change the slew rate of the LCD pins
> of a custom AM335x board during EMC tests. The AM335x, as described in a
> note in section 9.1 of its reference manual [1], is unable to write
> pinmux registers from user space. The series now makes it possible to
> write these registers from the pins debug file.

Even for debugfs it would be nice to have a piece of documentation.
Because pin control is a quite sensitive area and if something goes
wrong, it may damage the hardware.

> [1] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2021-05-19 13:33    [W:0.126 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site