lkml.org 
[lkml]   [2021]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC v2-fix 1/1] x86/boot: Add a trampoline for APs booting in 64-bit mode
I notice that you have [RFC v2-fix 1/1] as the prefix for this patch.
b4 recently gained support for partial series re-rolls [1], but I
think you would need to bump the version number [RFC PATCH v3 21/32]
and maintain the patch numbering. In this case with changes moving
between patches, and those other patches being squashed any chance of
automated reconstruction of this series is likely lost.

Just wanted to note that for future reference in case you were hoping
to avoid resending full series in the future. For now, some more
comments below:

[1]: https://lore.kernel.org/tools/20210517161317.teawoh5qovxpmqdc@nitro.local/

On Mon, May 17, 2021 at 5:54 PM Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@linux.intel.com> wrote:
>
> From: Sean Christopherson <sean.j.christopherson@intel.com>
>
> Add a trampoline for booting APs in 64-bit mode via a software handoff
> with BIOS, and use the new trampoline for the ACPI MP wake protocol used
> by TDX. You can find MADT MP wake protocol details in ACPI specification
> r6.4, sec 5.2.12.19.
>
> Extend the real mode IDT pointer by four bytes to support LIDT in 64-bit
> mode. For the GDT pointer, create a new entry as the existing storage
> for the pointer occupies the zero entry in the GDT itself.
>
> Reported-by: Kai Huang <kai.huang@intel.com>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> Reviewed-by: Andi Kleen <ak@linux.intel.com>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
>
> Changes since RFC v2:
> * Removed X86_CR0_NE and EFER related changes from this changes

This was only partially done, see below...

> and moved it to patch titled "x86/boot: Avoid #VE during
> boot for TDX platforms"
> * Fixed commit log as per Dan's suggestion.
> * Added inline get_trampoline_start_ip() to set start_ip.

You also added a comment to tr_idt, but didn't mention it here, so I
went to double check. Please take care to document all changes to the
patch from the previous review.

>
> arch/x86/boot/compressed/pgtable.h | 2 +-
> arch/x86/include/asm/realmode.h | 10 +++++++
> arch/x86/kernel/smpboot.c | 2 +-
> arch/x86/realmode/rm/header.S | 1 +
> arch/x86/realmode/rm/trampoline_64.S | 38 ++++++++++++++++++++++++
> arch/x86/realmode/rm/trampoline_common.S | 7 ++++-
> 6 files changed, 57 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h
> index 6ff7e81b5628..cc9b2529a086 100644
> --- a/arch/x86/boot/compressed/pgtable.h
> +++ b/arch/x86/boot/compressed/pgtable.h
> @@ -6,7 +6,7 @@
> #define TRAMPOLINE_32BIT_PGTABLE_OFFSET 0
>
> #define TRAMPOLINE_32BIT_CODE_OFFSET PAGE_SIZE
> -#define TRAMPOLINE_32BIT_CODE_SIZE 0x70
> +#define TRAMPOLINE_32BIT_CODE_SIZE 0x80
>
> #define TRAMPOLINE_32BIT_STACK_END TRAMPOLINE_32BIT_SIZE
>
> diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
> index 5db5d083c873..3328c8edb200 100644
> --- a/arch/x86/include/asm/realmode.h
> +++ b/arch/x86/include/asm/realmode.h
> @@ -25,6 +25,7 @@ struct real_mode_header {
> u32 sev_es_trampoline_start;
> #endif
> #ifdef CONFIG_X86_64
> + u32 trampoline_start64;
> u32 trampoline_pgd;
> #endif
> /* ACPI S3 wakeup */
> @@ -88,6 +89,15 @@ static inline void set_real_mode_mem(phys_addr_t mem)
> real_mode_header = (struct real_mode_header *) __va(mem);
> }
>
> +static inline unsigned long get_trampoline_start_ip(void)

I'd prefer this helper take a 'struct real_mode_header *rmh' as an
argument rather than assume a global variable.

> +{
> +#ifdef CONFIG_X86_64
> + if (is_tdx_guest())
> + return real_mode_header->trampoline_start64;
> +#endif
> + return real_mode_header->trampoline_start;
> +}
> +
> void reserve_real_mode(void);
>
> #endif /* __ASSEMBLY__ */
> diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
> index 16703c35a944..0b4dff5e67a9 100644
> --- a/arch/x86/kernel/smpboot.c
> +++ b/arch/x86/kernel/smpboot.c
> @@ -1031,7 +1031,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
> int *cpu0_nmi_registered)
> {
> /* start_ip had better be page-aligned! */
> - unsigned long start_ip = real_mode_header->trampoline_start;
> + unsigned long start_ip = get_trampoline_start_ip();
>
> unsigned long boot_error = 0;
> unsigned long timeout;
> diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S
> index 8c1db5bf5d78..2eb62be6d256 100644
> --- a/arch/x86/realmode/rm/header.S
> +++ b/arch/x86/realmode/rm/header.S
> @@ -24,6 +24,7 @@ SYM_DATA_START(real_mode_header)
> .long pa_sev_es_trampoline_start
> #endif
> #ifdef CONFIG_X86_64
> + .long pa_trampoline_start64
> .long pa_trampoline_pgd;
> #endif
> /* ACPI S3 wakeup */
> diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
> index 84c5d1b33d10..754f8d2ac9e8 100644
> --- a/arch/x86/realmode/rm/trampoline_64.S
> +++ b/arch/x86/realmode/rm/trampoline_64.S
> @@ -161,6 +161,19 @@ SYM_CODE_START(startup_32)
> ljmpl $__KERNEL_CS, $pa_startup_64
> SYM_CODE_END(startup_32)
>
> +SYM_CODE_START(pa_trampoline_compat)
> + /*
> + * In compatibility mode. Prep ESP and DX for startup_32, then disable
> + * paging and complete the switch to legacy 32-bit mode.
> + */
> + movl $rm_stack_end, %esp
> + movw $__KERNEL_DS, %dx
> +
> + movl $(X86_CR0_NE | X86_CR0_PE), %eax

Before this patch the startup path did not touch X86_CR0_NE. I assume
it was added opportunistically for the TDX case? If it is to stay in
this patch it deserves a code comment / mention in the changelog, or
it needs to move to the other patch that fixes up the CR0 setup for
TDX.


> + movl %eax, %cr0
> + ljmpl $__KERNEL32_CS, $pa_startup_32
> +SYM_CODE_END(pa_trampoline_compat)
> +
> .section ".text64","ax"
> .code64
> .balign 4
> @@ -169,6 +182,20 @@ SYM_CODE_START(startup_64)
> jmpq *tr_start(%rip)
> SYM_CODE_END(startup_64)
>
> +SYM_CODE_START(trampoline_start64)
> + /*
> + * APs start here on a direct transfer from 64-bit BIOS with identity
> + * mapped page tables. Load the kernel's GDT in order to gear down to
> + * 32-bit mode (to handle 4-level vs. 5-level paging), and to (re)load
> + * segment registers. Load the zero IDT so any fault triggers a
> + * shutdown instead of jumping back into BIOS.
> + */
> + lidt tr_idt(%rip)
> + lgdt tr_gdt64(%rip)
> +
> + ljmpl *tr_compat(%rip)
> +SYM_CODE_END(trampoline_start64)
> +
> .section ".rodata","a"
> # Duplicate the global descriptor table
> # so the kernel can live anywhere
> @@ -182,6 +209,17 @@ SYM_DATA_START(tr_gdt)
> .quad 0x00cf93000000ffff # __KERNEL_DS
> SYM_DATA_END_LABEL(tr_gdt, SYM_L_LOCAL, tr_gdt_end)
>
> +SYM_DATA_START(tr_gdt64)
> + .short tr_gdt_end - tr_gdt - 1 # gdt limit
> + .long pa_tr_gdt
> + .long 0
> +SYM_DATA_END(tr_gdt64)
> +
> +SYM_DATA_START(tr_compat)
> + .long pa_trampoline_compat
> + .short __KERNEL32_CS
> +SYM_DATA_END(tr_compat)
> +
> .bss
> .balign PAGE_SIZE
> SYM_DATA(trampoline_pgd, .space PAGE_SIZE)
> diff --git a/arch/x86/realmode/rm/trampoline_common.S b/arch/x86/realmode/rm/trampoline_common.S
> index 5033e640f957..ade7db208e4e 100644
> --- a/arch/x86/realmode/rm/trampoline_common.S
> +++ b/arch/x86/realmode/rm/trampoline_common.S
> @@ -1,4 +1,9 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> .section ".rodata","a"
> .balign 16
> -SYM_DATA_LOCAL(tr_idt, .fill 1, 6, 0)
> +
> +/* .fill cannot be used for size > 8. So use short and quad */

If there is to be a comment here it should be to clarify why @tr_idt
is 10 bytes, not necessarily a quirk of the assembler.

> +SYM_DATA_START_LOCAL(tr_idt)

The .fill restriction is only for @size, not @repeat. So, what's wrong
with SYM_DATA_LOCAL(tr_idt, .fill 2, 5, 0)?

\
 
 \ /
  Last update: 2021-05-18 04:08    [W:0.253 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site