lkml.org 
[lkml]   [2021]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support
On Mon, May 17, 2021 at 10:28 PM Sander Vanheule <sander@svanheule.net> wrote:
>
> This driver implements the GPIO and pin muxing features provided by the
> RTL8231. The device should be instantiated as an MFD child, where the
> parent device has already configured the regmap used for register
> access.
>
> Although described in the bindings, pin debouncing and drive strength
> selection are currently not implemented. Debouncing is only available
> for the six highest GPIOs, and must be emulated when other pins are used
> for (button) inputs anyway.

...

> +struct rtl8231_pin_desc {
> + unsigned int number;
> + const char *name;
> + enum rtl8231_pin_function functions;
> + u8 reg;
> + u8 offset;
> + u8 gpio_function_value;
> +};

I would see rather

sturct pinctrl_pin_desc desc;

Where drv_data describes the rest of the data for pin

...

> +static int rtl8231_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
> + const unsigned int **pins, unsigned int *num_pins)
> +{

> + if (selector < ARRAY_SIZE(rtl8231_pins)) {

Can we use traditional pattern, i.e.

if (... >= ARRAY_SIZE(...))
return -EINVAL;

...
return 0;

?

> + *pins = &rtl8231_pins[selector].number;
> + *num_pins = 1;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}

...

> +static int rtl8231_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
> + unsigned int group_selector)
> +{

> + int err = 0;

Redundant variable.

> + switch (func_flag) {
> + case RTL8231_PIN_FUNCTION_LED:
> + case RTL8231_PIN_FUNCTION_PWM:
> + err = regmap_update_bits(ctrl->map, desc->reg, function_mask, ~gpio_function);
> + break;
> + case RTL8231_PIN_FUNCTION_GPIO:
> + err = regmap_update_bits(ctrl->map, desc->reg, function_mask, gpio_function);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return err;
> +}

...

> +static const struct pinmux_ops rtl8231_pinmux_ops = {
> + .set_mux = rtl8231_set_mux,
> + .get_functions_count = rtl8231_get_functions_count,
> + .get_function_name = rtl8231_get_function_name,
> + .get_function_groups = rtl8231_get_function_groups,
> + .gpio_request_enable = rtl8231_gpio_request_enable,

> + .strict = true

Leave comma for non-terminator entries.

> +};
> +
> +

One blank line is enough.

...

> +static int rtl8231_pinctrl_init_functions(struct device *dev, struct rtl8231_pin_ctrl *ctrl)
> +{
> + struct rtl8231_function *function;
> + const char **group_name;
> + unsigned int f_idx;
> + unsigned int pin;
> +
> + ctrl->nfunctions = ARRAY_SIZE(rtl8231_pin_function_names);
> + ctrl->functions = devm_kcalloc(dev, ctrl->nfunctions, sizeof(*ctrl->functions), GFP_KERNEL);
> + if (IS_ERR(ctrl->functions)) {

Wrong.


> + dev_err(dev, "failed to allocate pin function descriptors\n");

Noisy message, user space will print the similar.

> + return PTR_ERR(ctrl->functions);
> + }
> +
> + for (f_idx = 0; f_idx < ctrl->nfunctions; f_idx++) {
> + function = &ctrl->functions[f_idx];
> + function->name = rtl8231_pin_function_names[f_idx];
> +
> + for (pin = 0; pin < ctrl->pctl_desc.npins; pin++)
> + if (rtl8231_pins[pin].functions & BIT(f_idx))
> + function->ngroups++;
> +
> + function->groups = devm_kcalloc(dev, function->ngroups,
> + sizeof(*function->groups), GFP_KERNEL);

> + if (IS_ERR(function->groups)) {
> + dev_err(dev, "failed to allocate pin function group names\n");
> + return PTR_ERR(function->groups);
> + }

Ditto.

> + group_name = function->groups;
> + for (pin = 0; pin < ctrl->pctl_desc.npins; pin++)
> + if (rtl8231_pins[pin].functions & BIT(f_idx))
> + *group_name++ = rtl8231_pins[pin].name;
> + }
> +
> + return 0;
> +}
> +
> +static int rtl8231_pinctrl_init(struct device *dev, struct rtl8231_pin_ctrl *ctrl)
> +{
> + struct pinctrl_dev *pctl;
> + struct pinctrl_pin_desc *pins;
> + unsigned int pin;

> + int err = 0;

Check entire series for unnecessary assignments.They

> +
> + ctrl->pctl_desc.name = "rtl8231-pinctrl",
> + ctrl->pctl_desc.owner = THIS_MODULE,
> + ctrl->pctl_desc.pctlops = &rtl8231_pinctrl_ops,
> + ctrl->pctl_desc.pmxops = &rtl8231_pinmux_ops,
> +
> + ctrl->pctl_desc.npins = ARRAY_SIZE(rtl8231_pins);
> + pins = devm_kcalloc(dev, ctrl->pctl_desc.npins, sizeof(*pins), GFP_KERNEL);
> + if (IS_ERR(pins)) {
> + dev_err(dev, "failed to allocate pin descriptors\n");
> + return PTR_ERR(pins);
> + }

Ditto.

> + ctrl->pctl_desc.pins = pins;
> +
> + for (pin = 0; pin < ctrl->pctl_desc.npins; pin++) {
> + pins[pin].number = rtl8231_pins[pin].number;
> + pins[pin].name = rtl8231_pins[pin].name;
> + }
> +
> + err = rtl8231_pinctrl_init_functions(dev, ctrl);
> + if (err)
> + return err;
> +
> + err = devm_pinctrl_register_and_init(dev->parent, &ctrl->pctl_desc, ctrl, &pctl);
> + if (err) {
> + dev_err(dev, "failed to register pin controller\n");
> + return err;
> + }
> +
> + err = pinctrl_enable(pctl);
> + if (err)
> + dev_err(dev, "failed to enable pin controller\n");
> +
> + return err;
> +}
> +
> +/*
> + * GPIO controller functionality
> + */
> +static int rtl8231_gpio_reg_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
> + unsigned int offset, unsigned int *reg, unsigned int *mask)
> +{
> + unsigned int pin_mask = BIT(offset % RTL8231_BITS_VAL);
> +
> + if (base == RTL8231_REG_GPIO_DATA0 || offset < 32) {
> + *reg = base + offset / RTL8231_BITS_VAL;
> + *mask = pin_mask;
> + } else if (base == RTL8231_REG_GPIO_DIR0) {
> + *reg = RTL8231_REG_PIN_HI_CFG;
> + *mask = FIELD_PREP(RTL8231_PIN_HI_CFG_DIR_MASK, pin_mask);
> + } else {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int rtl8231_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct rtl8231_pin_ctrl *ctrl;
> + struct gpio_regmap_config gpio_cfg = {};
> + struct gpio_regmap *gr;
> + int err;
> +
> + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> + if (!ctrl)
> + return -ENOMEM;
> +
> + ctrl->map = dev_get_regmap(dev->parent, NULL);
> + if (IS_ERR_OR_NULL(ctrl->map)) {
> + dev_err(dev, "failed to retrieve regmap\n");
> + if (!ctrl->map)
> + return -ENODEV;
> + else
> + return PTR_ERR(ctrl->map);
> + }
> +
> + err = rtl8231_pinctrl_init(dev, ctrl);
> + if (err)
> + return err;
> +
> + gpio_cfg.regmap = ctrl->map;
> + gpio_cfg.parent = dev->parent;
> + gpio_cfg.ngpio = RTL8231_NUM_GPIOS;
> + gpio_cfg.ngpio_per_reg = RTL8231_BITS_VAL;
> +
> + gpio_cfg.reg_dat_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> + gpio_cfg.reg_set_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> + gpio_cfg.reg_dir_in_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DIR0);
> + gpio_cfg.no_set_on_input = true;
> +
> + gpio_cfg.reg_mask_xlate = rtl8231_gpio_reg_mask_xlate;
> +
> + gr = devm_gpio_regmap_register(dev, &gpio_cfg);
> + if (IS_ERR(gr)) {
> + dev_err(dev, "failed to register gpio controller\n");
> + return PTR_ERR(gr);
> + }
> +
> + return 0;
> +}
> +
> +static struct platform_driver rtl8231_pinctrl_driver = {
> + .driver = {
> + .name = "rtl8231-pinctrl",
> + },
> + .probe = rtl8231_pinctrl_probe,
> +};
> +module_platform_driver(rtl8231_pinctrl_driver);
> +
> +MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
> +MODULE_DESCRIPTION("Realtek RTL8231 pin control and GPIO support");
> +MODULE_LICENSE("GPL v2");
> --
> 2.31.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2021-05-17 23:44    [W:0.453 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site