lkml.org 
[lkml]   [2021]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH net-next v4 01/28] net: mdio: ipq8064: clean whitespaces in define
On Sat, May 08, 2021 at 08:05:58PM +0200, Ansuel Smith wrote:
> On Sat, May 08, 2021 at 08:02:33PM +0200, Andrew Lunn wrote:
> > On Sat, May 08, 2021 at 02:28:51AM +0200, Ansuel Smith wrote:
> > > Fix mixed whitespace and tab for define spacing.
> >
> > Please add a patch [0/28] which describes the big picture of what
> > these changes are doing.
> >
> > Also, this series is getting big. You might want to split it into two,
> > One containing the cleanup, and the second adding support for the new
> > switch.
> >
> > Andrew
>
> There is a 0/28. With all the changes. Could be that I messed the cc?
> I agree think it's better to split this for the mdio part, the cleanup
> and the changes needed for the internal phy.

FWIW I didn't see the 0/28 mail either. I tried these out on my RB3011
today. I currently use the GPIO MDIO driver because I saw issues with
the IPQ8064 driver in the past, and sticking with the GPIO driver I see
both QCA8337 devices and traffic flows as expected, so no obvious
regressions from your changes.

I also tried switching to the IPQ8064 MDIO driver for my first device
(which is on the MDIO0 bus), but it's still not happy:

qca8k 37000000.mdio-mii:10: Switch id detected 0 but expected 13

J.

--
One of the nice things about standards is that there are so many of
them.

\
 
 \ /
  Last update: 2021-05-15 19:01    [W:0.131 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site