lkml.org 
[lkml]   [2021]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next] net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT
Date
On Fri, May 14 2021 at 11:56, Jakub Kicinski wrote:
> On Thu, 13 May 2021 00:28:02 +0200 Thomas Gleixner wrote:
>> > ---
>> > Alternatively __napi_schedule_irqoff() could be #ifdef'ed out on RT and
>> > an inline provided which invokes __napi_schedule().
>> >
>> > This was not chosen as it creates #ifdeffery all over the place and with
>> > the proposed solution the code reflects the documentation consistently
>> > and in one obvious place.
>>
>> Blame me for that decision.
>>
>> No matter which variant we end up with, this needs to go into all stable
>> RT kernels ASAP.
>
> Mumble mumble. I thought we concluded that drivers used on RT can be
> fixed, we've already done it for a couple drivers (by which I mean two).
> If all the IRQ handler is doing is scheduling NAPI (which it is for
> modern NICs) - IRQF_NO_THREAD seems like the right option.

Yes. That works, but there are a bunch which do more than that IIRC.

> Is there any driver you care about that we can convert to using
> IRQF_NO_THREAD so we can have new drivers to "do the right thing"
> while the old ones depend on this workaround for now?

The start of this thread was about i40e_msix_clean_rings() which
probably falls under the IRQF_NO_THREAD category, but I'm sure that
there are others. So I chose the safe way for RT for now.

> Another thing while I have your attention - ____napi_schedule() does
> __raise_softirq_irqoff() which AFAIU does not wake the ksoftirq thread.
> On non-RT we get occasional NOHZ warnings when drivers schedule napi
> from process context, but on RT this is even more of a problem, right?
> ksoftirqd won't run until something else actually wakes it up?

Correct. I sent a patch for the r8152 usb network driver today which
suffers from that problem. :)

As I said there, we want a (debug/lockdep) check in __napi_schedule()
whether soft interrupts are disabled, but let me have a look whether
that check might make more sense directly in __raise_softirq_irqoff().

Thanks,

tglx

\
 
 \ /
  Last update: 2021-05-14 22:16    [W:0.075 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site