Messages in this thread | | | Date | Wed, 12 May 2021 17:01:18 +0200 | From | "" <> | Subject | Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum |
| |
> > I've been doing my recent work with a P2040 and prior to that I did test > > out the recovery on a T2081 (which isn't documented to have this > > erratum) when I was re-working the driver. The "new" recovery actually > > seems better but I don't have a reliably faulty i2c device so that's > > only based on me writing some code to manually trigger the recovery > > (using the snippet below) and observing it with an oscilloscope. > > You don't need a faulty device, just an aborted I2C read/write op.
If you can wire GPIOs to the bus, you can use the I2C fault injector:
Documentation/i2c/gpio-fault-injection.rst
There are already two "incomplete transfer" injectors.
[unhandled content-type:application/pgp-signature]
| |