lkml.org 
[lkml]   [2021]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
On Mon, 3 May 2021 at 20:09, Chukun Pan <amadeus@jmu.edu.cn> wrote:
>
> The NanoPi R1S H5 is a open source board made by FriendlyElec.
> It has the following features:
>
> - Allwinner H5, Quad-core Cortex-A53
> - 512MB DDR3 RAM
> - 10/100/1000M Ethernet x 2
> - RTL8189ETV WiFi 802.11b/g/n
> - USB 2.0 host port (A)
> - MicroSD Slot
> - Serial Debug Port
> - 5V 2A DC power-supply
>
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

Linux next tag next-20210511 arm64 build failed due to this error.

Error: /builds/linux/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts:35.15-16
syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [/builds/linux/scripts/Makefile.lib:365:
arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dtb] Error 1
make[3]: Target '__build' not remade because of errors.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

#regzb introduced: 7c9dbeda744f ("arm64: dts: allwinner: h5: Add
NanoPi R1S H5 support")


> ---
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 194 ++++++++++++++++++
> 2 files changed, 195 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts


steps to reproduce:
--------------------------
# TuxMake is a command line tool and Python library that provides
# portable and repeatable Linux kernel builds across a variety of
# architectures, toolchains, kernel configurations, and make targets.
#
# TuxMake supports the concept of runtimes.
# See https://docs.tuxmake.org/runtimes/, for that to work it requires
# that you install podman or docker on your system.
#
# To install tuxmake on your system globally:
# sudo pip3 install -U tuxmake
#
# See https://docs.tuxmake.org/ for complete documentation.


tuxmake --runtime podman --target-arch arm64 --toolchain gcc-9
--kconfig defconfig --kconfig-add
https://builds.tuxbuild.com/1sNFFZazb6TLzCYLxNoyIcWs0eU/config


metadata:
git branch: master
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git commit: 4bf27b1f73303c33c5570b63f8ed734abcd1991f
git describe: next-20210511


--
Linaro LKFT
https://lkft.linaro.org

\
 
 \ /
  Last update: 2021-05-11 07:23    [W:0.064 / U:1.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site