lkml.org 
[lkml]   [2021]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 1/2] ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
    Date
    Latest kernel is actually using phy-mode property, so set proper value to make
    fec interface work again.

    Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
    ---
    arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
    index fa2307d8ce86..c713ac03b3b9 100644
    --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
    +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
    @@ -112,7 +112,7 @@ flash: m25p80@0 {
    &fec {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_enet>;
    - phy-mode = "rgmii";
    + phy-mode = "rgmii-id";
    phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
    phy-supply = <&vgen2_1v2_eth>;
    status = "okay";
    --
    2.29.2
    \
     
     \ /
      Last update: 2021-05-11 06:31    [W:2.352 / U:0.072 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site