lkml.org 
[lkml]   [2021]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 154/184] md/raid1: properly indicate failure when ending a failed write request
Date
From: Paul Clements <paul.clements@us.sios.com>

commit 2417b9869b81882ab90fd5ed1081a1cb2d4db1dd upstream.

This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.

Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).

Fixes: eeba6809d8d5 ("md/raid1: end bio when the device faulty")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Paul Clements <paul.clements@us.sios.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/raid1.c | 2 ++
1 file changed, 2 insertions(+)

--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -458,6 +458,8 @@ static void raid1_end_write_request(stru
if (!test_bit(Faulty, &rdev->flags))
set_bit(R1BIO_WriteError, &r1_bio->state);
else {
+ /* Fail the request */
+ set_bit(R1BIO_Degraded, &r1_bio->state);
/* Finished with this branch */
r1_bio->bios[mirror] = NULL;
to_put = bio;

\
 
 \ /
  Last update: 2021-05-10 13:01    [W:0.039 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site