lkml.org 
[lkml]   [2021]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 8/9] net: dsa: dsa_slave_phy_connect(): extend phy's flags with port specific phy flags
Date
This patch extends the flags of the phy that's being connected with the
port specific flags of the switch port.

This is needed to handle a port specific erratum of the KSZ8873 switch,
which is added in a later patch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/phy/phylink.c | 2 +-
net/dsa/slave.c | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 96d8e88b4e46..167c2277814f 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1029,7 +1029,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
if (pl->phydev)
return -EBUSY;

- return phy_attach_direct(pl->netdev, phy, 0, interface);
+ return phy_attach_direct(pl->netdev, phy, phy->dev_flags, interface);
}

/**
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 8c0f3c6ab365..7e208f16f006 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1758,6 +1758,10 @@ static int dsa_slave_phy_connect(struct net_device *slave_dev, int addr)
return -ENODEV;
}

+ if (ds->ops->get_phy_flags)
+ slave_dev->phydev->dev_flags |=
+ ds->ops->get_phy_flags(ds, dp->index);
+
return phylink_connect_phy(dp->pl, slave_dev->phydev);
}

--
2.29.2
\
 
 \ /
  Last update: 2021-05-10 15:01    [W:0.085 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site