lkml.org 
[lkml]   [2021]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] USB: cdc-acm: fix TIOCGSERIAL implementation
From
Date
Am Donnerstag, den 08.04.2021, 15:16 +0200 schrieb Johan Hovold:
> TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
> serial devices is only useful for setting the close_delay and
> closing_wait parameters.
>
> The xmit_fifo_size parameter could be used to set the hardware transmit
> fifo size of a legacy UART when it could not be detected, but the
> interface is limited to eight bits and should be left unset when it is
> not used.
>
> Similarly, baud_base could be used to set the UART base clock when it
> could not be detected, but might as well be left unset when it is not
> known (which is the case for CDC).
>
> Fix the cdc-acm TIOCGSERIAL implementation by dropping its custom
> interpretation of the unused xmit_fifo_size and baud_base fields, which
> overflowed the former with the URB buffer size and set the latter to the
> current line speed. Also return the port line number, which is the only
> other value used besides the close parameters.
>
> Note that the current line speed can still be retrieved through the
> standard termios interfaces.
>
> Fixes: 18c75720e667 ("USB: allow users to run setserial with cdc-acm")
> Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>

\
 
 \ /
  Last update: 2021-04-08 15:33    [W:0.035 / U:1.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site