lkml.org 
[lkml]   [2021]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v3 net-next 3/4] dt-bindings: net: dsa: add MT7530 interrupt controller binding
Date
Add device tree binding to support MT7530 interrupt controller.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
RFC v2 -> RFC v3:
- No changes.

Documentation/devicetree/bindings/net/dsa/mt7530.txt | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index de04626a8e9d..26b34888eb62 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -81,6 +81,11 @@ Optional properties:
- gpio-controller: Boolean; if defined, MT7530's LED controller will run on
GPIO mode.
- #gpio-cells: Must be 2 if gpio-controller is defined.
+- interrupt-controller: Boolean; Enables the internal interrupt controller.
+
+If interrupt-controller is defined, the following property is required.
+
+- interrupts: Parent interrupt for the interrupt controller.

See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required, optional properties and how the integrated switch subnodes must
--
2.25.1
\
 
 \ /
  Last update: 2021-04-08 14:40    [W:0.063 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site