lkml.org 
[lkml]   [2021]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
From
Date
On 4/7/21 1:53 AM, Andy Shevchenko wrote:
> On Tue, Apr 6, 2021 at 5:56 PM Henning Schild
> <henning.schild@siemens.com> wrote:
>>
>> Am Thu, 1 Apr 2021 18:15:41 +0200
>> schrieb "Enrico Weigelt, metux IT consult" <lkml@metux.net>:
>>
>>> On 29.03.21 19:49, Henning Schild wrote:
>>>
>>> Hi,
>>>
>>>> This driver adds initial support for several devices from Siemens.
>>>> It is based on a platform driver introduced in an earlier commit.
>>>
>>> Where does the wdt actually come from ?
>>>
>>> Is it in the SoC ? (which SoC exactly). SoC-builtin wdt is a pretty
>>> usual case.
>>>
>>> Or some external chip ?
>>
>> I guess external chip, but again we are talking about multiple
>> machines. And the manuals i read so far do not go into that sort of
>> detail. In fact on some of the machines you will have two watchdogs,
>> one from the SoC and that "special" one.
>> That has several reasons, probably not too important here. The HW guys
>> are adding another wd not just for fun, and it would be nice to have a
>> driver.
>>
>>> The code smells a bit like two entirely different wdt's that just have
>>> some similarities. If that's the case, I'd rather split it into two
>>> separate drivers and let the parent driver (board file) instantiate
>>> the correct one.
>>
>> Yes, it is two. Just like for the LEDs. One version PIO-based another
>> version gpio/p2sb/mmio based.
>
> I tend to agree with Enrico that this should be two separate drivers.
>

Agreed.

Guenter

>> In fact the latter should very likely be based on that gpio pinctl,
>> whether it really needs to be a separate driver will have to be seen.
>> There are probably pros and cons for both options.
>
>

\
 
 \ /
  Last update: 2021-04-07 14:18    [W:0.211 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site