lkml.org 
[lkml]   [2021]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder
From
Date
Hi Maintainers,

Gentle pin for this patch.

Thanks


On Fri, 2021-03-12 at 11:40 +0800, Michael Kao wrote:
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
>
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> ---
> drivers/thermal/Kconfig | 14 ++++-------
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/mediatek/Kconfig | 23 +++++++++++++++++++
> drivers/thermal/mediatek/Makefile | 1 +
> .../{mtk_thermal.c => mediatek/soc_temp.c} | 0
> 5 files changed, 29 insertions(+), 11 deletions(-)
> create mode 100644 drivers/thermal/mediatek/Kconfig
> create mode 100644 drivers/thermal/mediatek/Makefile
> rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 7edc8dc6bbab..b2da0a1bda34 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -401,16 +401,10 @@ config DA9062_THERMAL
> zone.
> Compatible with the DA9062 and DA9061 PMICs.
>
> -config MTK_THERMAL
> - tristate "Temperature sensor driver for mediatek SoCs"
> - depends on ARCH_MEDIATEK || COMPILE_TEST
> - depends on HAS_IOMEM
> - depends on NVMEM || NVMEM=n
> - depends on RESET_CONTROLLER
> - default y
> - help
> - Enable this option if you want to have support for thermal management
> - controller present in Mediatek SoCs
> +menu "Mediatek thermal drivers"
> +depends on ARCH_MEDIATEK || COMPILE_TEST
> +source "drivers/thermal/mediatek/Kconfig"
> +endmenu
>
> config AMLOGIC_THERMAL
> tristate "Amlogic Thermal Support"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index b64dd50a6629..f9e07c3f529e 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -55,7 +55,7 @@ obj-y += st/
> obj-$(CONFIG_QCOM_TSENS) += qcom/
> obj-y += tegra/
> obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
> -obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
> +obj-$(CONFIG_MTK_THERMAL) += mediatek/
> obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
> obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
> obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> new file mode 100644
> index 000000000000..0351e73170b7
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -0,0 +1,23 @@
> +config MTK_THERMAL
> + tristate "Mediatek thermal drivers"
> + depends on THERMAL_OF
> + help
> + This is the option for Mediatek thermal software
> + solutions. Please enable corresponding options to
> + get temperature information from thermal sensors or
> + turn on throttle mechaisms for thermal mitigation.
> +
> +if MTK_THERMAL
> +
> +config MTK_SOC_THERMAL
> + tristate "Temperature sensor driver for mediatek SoCs"
> + depends on HAS_IOMEM
> + depends on NVMEM
> + depends on RESET_CONTROLLER
> + help
> + Enable this option if you want to get SoC temperature
> + information for Mediatek platforms. This driver
> + configures thermal controllers to collect temperature
> + via AUXADC interface.
> +
> +endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> new file mode 100644
> index 000000000000..f75313ddce5e
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTK_SOC_THERMAL) += soc_temp.o
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
> similarity index 100%
> rename from drivers/thermal/mtk_thermal.c
> rename to drivers/thermal/mediatek/soc_temp.c

\
 
 \ /
  Last update: 2021-04-07 11:08    [W:0.126 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site