lkml.org 
[lkml]   [2021]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] usb: dwc3: Add driver for Xilinx platforms
On Wed, Mar 17, 2021 at 12:22:29PM +0530, Manish Narani wrote:
> Add a new driver for supporting Xilinx platforms. This driver is used
> for some sequence of operations required for Xilinx USB controllers.
> This driver is also used to choose between PIPE clock coming from SerDes
> and the Suspend Clock. Before the controller is out of reset, the clock
> selection should be changed to PIPE clock in order to make the USB
> controller work. There is a register added in Xilinx USB controller
> register space for the same.
>
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>

Trying this driver with qemu (v6.0.0-rc2) results in:

[ 15.184242] dwc3-xilinx ff9d0000.usb: error -ENODEV: failed to assert Reset
[ 15.185754] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b9b
[ 15.185994] Mem abort info:
[ 15.186065] ESR = 0x96000004
[ 15.186317] EC = 0x25: DABT (current EL), IL = 32 bits
[ 15.186414] SET = 0, FnV = 0
[ 15.186498] EA = 0, S1PTW = 0
[ 15.186579] Data abort info:
[ 15.186666] ISV = 0, ISS = 0x00000004
[ 15.186756] CM = 0, WnR = 0
[ 15.186887] [006b6b6b6b6b6b9b] address between user and kernel address ranges
[ 15.187436] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 15.187777] Modules linked in:
[ 15.188060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc6-next-20210406-00006-g05407f068fc9-dirty #1
[ 15.188265] Hardware name: Xilinx Versal Virtual development board (DT)
[ 15.188495] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 15.188614] pc : __clk_put+0x24/0x138
[ 15.188716] lr : __clk_put+0x24/0x138
[ 15.188791] sp : ffff80001326bac0
[ 15.188853] x29: ffff80001326bac0 x28: ffff00000644ed00
[ 15.188982] x27: ffff00000421ecd0 x26: ffff00000421e810
[ 15.189076] x25: ffff00000644f100 x24: 0000000000000000
[ 15.189170] x23: ffff8000126a2570 x22: 0000000000000005
[ 15.189271] x21: ffff00000644ed00 x20: ffff000006449970
[ 15.189367] x19: 6b6b6b6b6b6b6b6b x18: 0000000000000010
[ 15.189456] x17: 0000000000000001 x16: 0000000000000000
[ 15.189546] x15: ffff000003af0490 x14: 00000000000001b7
[ 15.189642] x13: ffff000003af0490 x12: 00000000ffffffea
[ 15.189729] x11: ffff8000123b6460 x10: 0000000000000080
[ 15.189815] x9 : 00000000676993c6 x8 : 00000000676993c6
[ 15.189941] x7 : 000000007d152ab3 x6 : ffff800012768480
[ 15.190047] x5 : 0000000000000000 x4 : 000000007f97631e
[ 15.190139] x3 : 00000000d5bdf2c2 x2 : 000000000000000b
[ 15.190233] x1 : ffff000003af0040 x0 : 0000000000000001
[ 15.190432] Call trace:
[ 15.190506] __clk_put+0x24/0x138
[ 15.190588] clk_put+0x10/0x20
[ 15.190653] clk_bulk_put+0x3c/0x60
[ 15.190724] devm_clk_bulk_release+0x1c/0x28
[ 15.190806] release_nodes+0x1c0/0x2b0
[ 15.190887] devres_release_all+0x38/0x60
[ 15.190963] really_probe+0x1e4/0x3a8
[ 15.191042] driver_probe_device+0x64/0xc8
...

because of ...

> +
> + ret = devm_clk_bulk_get_all(priv_data->dev, &priv_data->clks);
> + if (ret < 0)
> + return ret;
> +
...
> +
> +err_clk_put:
> + clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
> + clk_bulk_put_all(priv_data->num_clocks, priv_data->clks);

clk_bulk_put_all() is not necessary because of devm_clk_bulk_get_all(),
and results in a double free.

> +static int dwc3_xlnx_remove(struct platform_device *pdev)
> +{
> + struct dwc3_xlnx *priv_data = platform_get_drvdata(pdev);
> + struct device *dev = &pdev->dev;
> +
> + of_platform_depopulate(dev);
> +
> + clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
> + clk_bulk_put_all(priv_data->num_clocks, priv_data->clks);

Same here. This will likely crash the driver on unload.

Guenter

\
 
 \ /
  Last update: 2021-04-07 23:48    [W:0.095 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site