lkml.org 
[lkml]   [2021]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] arm: zynq: don't disable CONFIG_ARM_GLOBAL_TIMER due to CONFIG_CPU_FREQ anymore
Date
Now ARM global timer driver could work even if it's source clock rate
changes, so we don't need to disable that driver when cpu frequency scaling
is in use.

This cause Zynq arch to get support for timer delay and get_cycles().

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
---
arch/arm/mach-zynq/Kconfig | 2 +-
drivers/clocksource/Kconfig | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 43fb941dcd07..a56748d671c4 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -6,7 +6,7 @@ config ARCH_ZYNQ
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
- select ARM_GLOBAL_TIMER if !CPU_FREQ
+ select ARM_GLOBAL_TIMER
select CADENCE_TTC_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 19fc5f8883e0..9fa28237715a 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -360,6 +360,7 @@ config ARM_GLOBAL_TIMER

config ARM_GT_INITIAL_PRESCALER_VAL
int "ARM global timer initial prescaler value"
+ default 2 if ARCH_ZYNQ
default 1
depends on ARM_GLOBAL_TIMER
help
--
2.17.1
\
 
 \ /
  Last update: 2021-04-06 15:01    [W:2.471 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site