lkml.org 
[lkml]   [2021]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] rockchip: enabled LAN port on NanoPi R2S
Hi,

On Mon, Apr 5, 2021 at 3:46 PM Tianling Shen <cnsztl@gmail.com> wrote:
>
> From: David Bauer <mail@david-bauer.net>
>
> Enable the USB3 port on the FriendlyARM NanoPi R2S.
> This is required for the USB3 attached LAN port to work.
>
> Signed-off-by: David Bauer <mail@david-bauer.net>
> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> ---
> .../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 23 +++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
> index faf496d789cf..6ba9799a95c5 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
> @@ -37,6 +37,18 @@
> };
> };
>
> + vcc_rtl8153: vcc-rtl8153-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rtl8153_en_drv>;
> + regulator-always-on;
> + regulator-name = "vcc_rtl8153";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;

This is just a simple switch, not an actual regulator.
It would make more sense to drop the voltage range and
instead have the implementation pass-through voltage
constraints from its parent.

> + enable-active-high;
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
> @@ -265,6 +277,12 @@
> };
> };
> };
> +
> + usb {
> + rtl8153_en_drv: rtl8153-en-drv {
> + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> };
>
> &io_domains {
> @@ -364,6 +382,11 @@
> dr_mode = "host";
> };
>
> +&usbdrd3 {
> + dr_mode = "host";
> + status = "okay";

Please also add a device node for the actual Ethernet controller, and
set up an aliases node for it, so that the bootloader has some place
to fill in a MAC address.


ChenYu

> +};
> +
> &usb_host0_ehci {
> status = "okay";
> };
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2021-04-05 10:15    [W:0.073 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site