lkml.org 
[lkml]   [2021]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 71/74] usb: dwc2: Prevent core suspend when port connection flag is 0
Date
From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>

commit 93f672804bf2d7a49ef3fd96827ea6290ca1841e upstream.

In host mode port connection status flag is "0" when loading
the driver. After loading the driver system asserts suspend
which is handled by "_dwc2_hcd_suspend()" function. Before
the system suspend the port connection status is "0". As
result need to check the "port_connect_status" if it is "0",
then skipping entering to suspend.

Cc: <stable@vger.kernel.org> # 5.2
Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE")
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc2/hcd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -4322,7 +4322,8 @@ static int _dwc2_hcd_suspend(struct usb_
if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
goto unlock;

- if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL)
+ if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL ||
+ hsotg->flags.b.port_connect_status == 0)
goto skip_power_saving;

/*

\
 
 \ /
  Last update: 2021-04-05 11:08    [W:1.047 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site