lkml.org 
[lkml]   [2021]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] net: phy: fix PHY possibly unwork after MDIO bus resume back
Date

Hi Heiner,

> -----Original Message-----
> From: Heiner Kallweit <hkallweit1@gmail.com>
> Sent: 2021年4月5日 20:10
> To: christian.melki@t2data.com; Joakim Zhang <qiangqing.zhang@nxp.com>;
> andrew@lunn.ch; linux@armlinux.org.uk; davem@davemloft.net;
> kuba@kernel.org
> Cc: netdev@vger.kernel.org; linux-kernel@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH] net: phy: fix PHY possibly unwork after MDIO bus resume
> back
>
> On 05.04.2021 10:43, Christian Melki wrote:
> > On 4/5/21 12:48 AM, Heiner Kallweit wrote:
> >> On 04.04.2021 16:09, Heiner Kallweit wrote:
> >>> On 04.04.2021 12:07, Joakim Zhang wrote:
> >>>> commit 4c0d2e96ba055 ("net: phy: consider that suspend2ram may cut
> >>>> off PHY power") invokes phy_init_hw() when MDIO bus resume, it will
> >>>> soft reset PHY if PHY driver implements soft_reset callback.
> >>>> commit 764d31cacfe4 ("net: phy: micrel: set soft_reset callback to
> >>>> genphy_soft_reset for KSZ8081") adds soft_reset for KSZ8081. After
> >>>> these two patches, I found i.MX6UL 14x14 EVK which connected to
> >>>> KSZ8081RNB doesn't work any more when system resume back, MAC
> driver is fec_main.c.
> >>>>
> >>>> It's obvious that initializing PHY hardware when MDIO bus resume
> >>>> back would introduce some regression when PHY implements
> >>>> soft_reset. When I
> >>>
> >>> Why is this obvious? Please elaborate on why a soft reset should
> >>> break something.
> >>>
> >>>> am debugging, I found PHY works fine if MAC doesn't support
> >>>> suspend/resume or phy_stop()/phy_start() doesn't been called during
> >>>> suspend/resume. This let me realize, PHY state machine
> >>>> phy_state_machine() could do something breaks the PHY.
> >>>>
> >>>> As we known, MAC resume first and then MDIO bus resume when system
> >>>> resume back from suspend. When MAC resume, usually it will invoke
> >>>> phy_start() where to change PHY state to PHY_UP, then trigger the
> >>>> stat> machine to run now. In phy_state_machine(), it will
> >>>> start/config auto-nego, then change PHY state to PHY_NOLINK, what
> >>>> to next is periodically check PHY link status. When MDIO bus
> >>>> resume, it will initialize PHY hardware, including soft_reset, what
> >>>> would soft_reset affect seems various from different PHYs. For
> >>>> KSZ8081RNB, when it in PHY_NOLINK state and then perform a soft reset,
> it will never complete auto-nego.
> >>>
> >>> Why? That would need to be checked in detail. Maybe chip errata
> >>> documentation provides a hint.
> >>>
> >>
> >> The KSZ8081 spec says the following about bit BMCR_PDOWN:
> >>
> >> If software reset (Register 0.15) is
> >> used to exit power-down mode
> >> (Register 0.11 = 1), two software
> >> reset writes (Register 0.15 = 1) are
> >> required. The first write clears
> >> power-down mode; the second
> >> write resets the chip and re-latches
> >> the pin strapping pin values.
> >>
> >> Maybe this causes the issue you see and genphy_soft_reset() isn't
> >> appropriate for this PHY. Please re-test with the KSZ8081 soft reset
> >> following the spec comment.
> >>
> >
> > Interesting. Never expected that behavior.
> > Thanks for catching it. Skimmed through the datasheets/erratas.
> > This is what I found (micrel.c):
> >
> > 10/100:
> > 8001 - Unaffected?
> > 8021/8031 - Double reset after PDOWN.
> > 8041 - Errata. PDOWN broken. Recommended do not use. Unclear if reset
> > solves the issue since errata says no error after reset but is also
> > claiming that only toggling PDOWN (may) or power will help.
> > 8051 - Double reset after PDOWN.
> > 8061 - Double reset after PDOWN.
> > 8081 - Double reset after PDOWN.
> > 8091 - Double reset after PDOWN.
> >
> > 10/100/1000:
> > Nothing in gigabit afaics.
> >
> > Switches:
> > 8862 - Not affected?
> > 8863 - Errata. PDOWN broken. Reset will not help. Workaround exists.
> > 8864 - Not affected?
> > 8873 - Errata. PDOWN broken. Reset will not help. Workaround exists.
> > 9477 - Errata. PDOWN broken. Will randomly cause link failure on
> > adjacent links. Do not use.
> >
> > This certainly explains a lot.
> >
> >>>>
> >>>> This patch changes PHY state to PHY_UP when MDIO bus resume back,
> >>>> it should be reasonable after PHY hardware re-initialized. Also
> >>>> give state machine a chance to start/config auto-nego again.
> >>>>
> >>>
> >>> If the MAC driver calls phy_stop() on suspend, then
> >>> phydev->suspended is true and mdio_bus_phy_may_suspend() returns
> >>> false. As a consequence
> >>> phydev->suspended_by_mdio_bus is false and mdio_bus_phy_resume()
> >>> skips the PHY hw initialization.
> >>> Please also note that mdio_bus_phy_suspend() calls
> >>> phy_stop_machine() that sets the state to PHY_UP.
> >>>
> >>
> >> Forgot that MDIO bus suspend is done before MAC driver suspend.
> >> Therefore disregard this part for now.
> >>
> >>> Having said that the current argumentation isn't convincing. I'm not
> >>> aware of such issues on other systems, therefore it's likely that
> >>> something is system-dependent.
> >>>
> >>> Please check the exact call sequence on your system, maybe it
> >>> provides a hint.
> >>>
> >>>> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> >>>> ---
> >>>> drivers/net/phy/phy_device.c | 7 +++++++
> >>>> 1 file changed, 7 insertions(+)
> >>>>
> >>>> diff --git a/drivers/net/phy/phy_device.c
> >>>> b/drivers/net/phy/phy_device.c index cc38e326405a..312a6f662481
> >>>> 100644
> >>>> --- a/drivers/net/phy/phy_device.c
> >>>> +++ b/drivers/net/phy/phy_device.c
> >>>> @@ -306,6 +306,13 @@ static __maybe_unused int
> mdio_bus_phy_resume(struct device *dev)
> >>>> ret = phy_resume(phydev);
> >>>> if (ret < 0)
> >>>> return ret;
> >>>> +
> >>>> + /* PHY state could be changed to PHY_NOLINK from MAC controller
> resume
> >>>> + * rounte with phy_start(), here change to PHY_UP after
> re-initializing
> >>>> + * PHY hardware, let PHY state machine to start/config auto-nego
> again.
> >>>> + */
> >>>> + phydev->state = PHY_UP;
> >>>> +
> >>>> no_resume:
> >>>> if (phydev->attached_dev && phydev->adjust_link)
> >>>> phy_start_machine(phydev);
> >>>>
> >>>
> >>
> >
>
> This is a quick draft of the modified soft reset for KSZ8081.
> Some tests would be appreciated.
>

I test this patch at my side, unfortunately, it still can't work.

I have not found what soft reset would affect in 8081 spec, is there ang common
Description for different PHYs?

Best Regards,
Joakim Zhang
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index
> a14a00328..4902235a8 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -1091,6 +1091,42 @@ static void kszphy_get_stats(struct phy_device
> *phydev,
> data[i] = kszphy_get_stat(phydev, i); }
>
> +int ksz8081_soft_reset(struct phy_device *phydev) {
> + int bmcr, ret, val;
> +
> + phy_lock_mdio_bus(phydev);
> +
> + bmcr = __phy_read(phydev, MII_BMCR);
> + if (bmcr < 0)
> + return bmcr;
> +
> + bmcr |= BMCR_RESET;
> +
> + if (bmcr & BMCR_PDOWN)
> + __phy_write(phydev, MII_BMCR, bmcr);
> +
> + if (phydev->autoneg == AUTONEG_ENABLE)
> + bmcr |= BMCR_ANRESTART;
> +
> + __phy_write(phydev, MII_BMCR, bmcr & ~BMCR_ISOLATE);
> +
> + phy_unlock_mdio_bus(phydev);
> +
> + phydev->suspended = 0;
> +
> + ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val &
> BMCR_RESET),
> + 50000, 600000, true);
> + if (ret)
> + return ret;
> +
> + /* BMCR may be reset to defaults */
> + if (phydev->autoneg == AUTONEG_DISABLE)
> + ret = genphy_setup_forced(phydev);
> +
> + return ret;
> +}
> +
> static int kszphy_suspend(struct phy_device *phydev) {
> /* Disable PHY Interrupts */
> @@ -1303,7 +1339,7 @@ static struct phy_driver ksphy_driver[] = {
> .driver_data = &ksz8081_type,
> .probe = kszphy_probe,
> .config_init = ksz8081_config_init,
> - .soft_reset = genphy_soft_reset,
> + .soft_reset = ksz8081_soft_reset,
> .config_intr = kszphy_config_intr,
> .handle_interrupt = kszphy_handle_interrupt,
> .get_sset_count = kszphy_get_sset_count,
> --
> 2.31.1

\
 
 \ /
  Last update: 2021-04-06 04:08    [W:0.086 / U:1.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site