lkml.org 
[lkml]   [2021]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignment
Date
The brcmfmac driver can generate a scatterlist from a skb with each packets
not aligned to the block size. This is not supported by the Amlogic Descriptor
dma engine where each descriptor must match a multiple of the block size.

The sg list is valid, since the sum of the sg buffers is a multiple of the
block size, but we must discard those when in SD_IO_RW_EXTENDED mode since
SDIO block mode can be used under the hood even with data->blocks == 1.

Those transfers are very rare, thus can be replaced by a bounce buffer
without real performance loss.

Fixes: 7412dee9f1fd ("mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size alignment in block mode")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 1c61f0f24c09..016a6106151a 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -236,7 +236,8 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
if (host->dram_access_quirk)
return;

- if (data->blocks > 1) {
+ /* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */
+ if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) {
/*
* In block mode DMA descriptor format, "length" field indicates
* number of blocks and there is no way to pass DMA size that
--
2.25.1
\
 
 \ /
  Last update: 2021-04-26 19:56    [W:0.109 / U:0.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site